Today I made some more tests. Regarding the slamming function I'm wondering how this should work.
In OS controller properties nothing changes if I push it all way in. Fast, slow, doesn't matter.
Shouldn't it show any reaction in here?
Posted 19 September 2013 - 07:00 PM
For all of those with the 'slam' issue, here's what I've found ...
In testing, it works great. This, of course is with the plunger all the way on, without mounting plates or cabinet possibly stopping the tube short. The easy fix is to remove the tube and work the rubber tip up about a 1/4", and replacing the tube. Unfortunately, it is very difficult to account for everyone's setup, but I assure you the feature is there and it works as designed.
-------------------------------------------------------------------------
For those wondering when their order will ship ...
We are currently packing up to Invoice No. 844.
More kits are being assembled and tested as I type this. By early next week, we'll be packing up to Invoice No. 891.
Thereafter, we will be assembling, testing, and shipping weekly.
---------------------------------------------------------------------------
A BIG thank you to everyone for all their patience and understanding. It has been a learning experience for me, and this experience is sure to improve the way I handle future orders.
Thank you!

My Photobucket Resources
Whether You Believe You Can, Or You Can't, You Are Right." - Henry Ford
The future of pinball lives, it just needs to be nurtured!
If you're here to stab me in the back, you're going to have to get in line.
Posted 20 September 2013 - 03:13 AM

My Photobucket Resources
Whether You Believe You Can, Or You Can't, You Are Right." - Henry Ford
The future of pinball lives, it just needs to be nurtured!
If you're here to stab me in the back, you're going to have to get in line.
Posted 20 September 2013 - 03:28 PM
Hello,
I am about to place an order and just wanted to double check with you and make sure the Nano Tech plunger (sata connection) can be modified to the new Digital Plunger Kit style (header). Just asking to clear up some confusion. Also, are there directions on how to make the modification? Looking forward to giving this a go after the bad luck I had with Nano Tech. Thanks !
Posted 20 September 2013 - 03:55 PM
It can't be modified, no. The VirtuaPin plunger kit is a complete unit, so there would be no need. If you already have the Nanotech kit, simply remove the tube from the plunger and slide the new one onto it, and you're done.
Mention you already have a plunger in the buyer's notes when placing your order, and receive a $20 rebate.

My Photobucket Resources
Whether You Believe You Can, Or You Can't, You Are Right." - Henry Ford
The future of pinball lives, it just needs to be nurtured!
If you're here to stab me in the back, you're going to have to get in line.
Posted 20 September 2013 - 05:18 PM
For all of those with the 'slam' issue, here's what I've found ...
In testing, it works great. This, of course is with the plunger all the way on, without mounting plates or cabinet possibly stopping the tube short. The easy fix is to remove the tube and work the rubber tip up about a 1/4", and replacing the tube. Unfortunately, it is very difficult to account for everyone's setup, but I assure you the feature is there and it works as designed.
Thanks, I also can confirm it works that way. ![]()
Is there any info available what needs to be tweak to have all tables working with the plunger (talking VP only right now)?
Is there any way to set up the slamming function to work with those tables that expect a launch button?
Edited by cs2908, 20 September 2013 - 05:20 PM.
Posted 20 September 2013 - 05:39 PM

My Photobucket Resources
Whether You Believe You Can, Or You Can't, You Are Right." - Henry Ford
The future of pinball lives, it just needs to be nurtured!
If you're here to stab me in the back, you're going to have to get in line.
Posted 20 September 2013 - 05:43 PM
It can't be modified, no. The VirtuaPin plunger kit is a complete unit, so there would be no need. If you already have the Nanotech kit, simply remove the tube from the plunger and slide the new one onto it, and you're done.
Mention you already have a plunger in the buyer's notes when placing your order, and receive a $20 rebate.
Ok sounds easy enough. I placed my order earlier and mentioned the plunger, Thanks again.
Posted 20 September 2013 - 11:20 PM
Noah forgive my ignorance .. this is my order number 818-1374537170
?? the purchase was made July 22, 2013.
Cheers ..
"Learning without thought is vain, thought without learning is dangerous." (Confucius)
"Aprender sin pensar es inútil, pensar sin aprender es peligroso". (Confucio)
Posted 20 September 2013 - 11:24 PM
As for the table modding for the plunger, I posted a fix that works for nearly all of JP's tables and many others. I'll try to dig up the link. Its hard to search from my phone.
Hey Paul, did you mean this one:
http://www.vpforums....showtopic=13655
Best Regards,
Todd.
Posted 20 September 2013 - 11:59 PM
Noah forgive my ignorance .. this is my order number 818-1374537170
?? the purchase was made July 22, 2013.
Cheers ..
You're Invoice No. 837. Definitely in the group we're currently packing.
@ Todd - Thanks!

My Photobucket Resources
Whether You Believe You Can, Or You Can't, You Are Right." - Henry Ford
The future of pinball lives, it just needs to be nurtured!
If you're here to stab me in the back, you're going to have to get in line.
Posted 21 September 2013 - 02:48 AM
ok, thank you very much .. I've certainly made my day.
I'll be waiting anxiously. ![]()
Cheers, Javier..
"Learning without thought is vain, thought without learning is dangerous." (Confucius)
"Aprender sin pensar es inútil, pensar sin aprender es peligroso". (Confucio)
Posted 21 September 2013 - 03:40 PM
I'm sorry, but that's not the way it works for me.The slam feature actually translates to the launch ball button press, so slam will launch tables with just a Launch Ball button every time.
Haven't tried any programming yet, maybe this will be the starting pointAs for the table modding for the plunger, I posted a fix that works for nearly all of JP's tables and many others. I'll try to dig up the link. Its hard to search from my phone.
Posted 21 September 2013 - 05:27 PM
Edited by cs2908, 21 September 2013 - 05:28 PM.
Posted 21 September 2013 - 07:21 PM
Sorry for being a beginner...
I solved the issue with nudging and tilting.
Further tests showed VP only accepts changes in the key preferences by at least reloading the table or even restarting VP.
Need to tweak the values a littles bit more, but then it will run perfectly
The slamming issue wasn't solved that way
Did you reassign the launch button or are you using a key encoder for some reason?
In testing, the slam does, indeed, launch the ball on tables like Medieval Madness.

My Photobucket Resources
Whether You Believe You Can, Or You Can't, You Are Right." - Henry Ford
The future of pinball lives, it just needs to be nurtured!
If you're here to stab me in the back, you're going to have to get in line.