Jump to content



Photo
- - - - -

Time to join the ranks


  • Please log in to reply
160 replies to this topic

#1 zebulon

zebulon

    Cantankerous old B****D

  • Platinum Supporter
  • 1,179 posts
  • Location:Whitby, Ontario, Canada

  • Flag: Canada

  • Favorite Pinball: xenon, Medieval Madness, Royal Flush, Silverball Mania

Posted 21 February 2011 - 11:56 PM

Finished all the research, drawings, re-drawings, re-thinking and general procrastination and decided to take the plunge.

I've had 3 monitors sitting decased and set up along with a computer I've built specifically for this project for the better part of 6 months now and I finally decided to go for it.

Initially, I was going to go with a traditional design, playfield and a back box with DMD, but then I got to thinking about the "Head's up Display" in my Grand Prix GTP and set off in another direction, reflecting the DMD in the upper playfield. "What a radical, inovative and new idea" I thought, until Mameman23 did his build and introduced me to the Pinball 2000 design (who knew?) think.gif

A little more planning, a lot more redrawing, and it's under way.

Here's the hardware specs:

Biostar TA870+ mainboard
AMD Phenom II X2 555 Black Edition (80W) Dual-Core Socket AM3, 3.2GHz, 7MB Cache, 2000MHz HT, 45nm (HDZ555WFGMBOX) Got lucky and unlocked 2 cores and overclocked stable to 3.59ghz
G.SKILL NQ Series DDR3 1333MHz (PC3-10666) 4GB (2x2GB) Dual Channel Kit (F3-10666CL9D-4GBNQ) x2 for a total of 8gb
Sapphire ATI Radeon HD 5770 1GB GDDR5 ATI Radeon HD 5770 Chipset Dual Display Dual DVI/HDMI/ Display Port PCI-Express 2.0 Graphics Card (primary)
Sapphire Ultimate ATI Radeon HD 5670 1GB GDDR5 ATI Radeon HD 5670 Chipset (775Mhz) 1GB GDDR5 (4000Mhz) Dual Dual-Link DVI/HDMI/Display Port PCI-Express 2.0 Graphics Card (secondary)
Enermax NAXN Tomahawk II 550W Power Supply (ENP550AWT)

Older 37" Acer runs 1080p@50hz playfield
Older Prima 27" running 720p backbox
Older Dell 1504fp running 640x480 DMD


8hrs into the build and here it sits:




The legs and feet arrived today, Groovy Gamegear has shipped:

White ButtonBlaster™ LED (WHTBBLED)
LED-Wiz+GP™ 16 Output + 16 Input, Output and Gaming Contr (LEDWIZGP01)
Device Number 1 (Use if FIRST or ONLY device of this EXACT type)
Electric ICE 2™ Lightable Horizontal Pushbutton (PBELECICE2)
Switch Type Standard Soft Touch™
Lighting Option None
Red ButtonBlaster™ LED (REDBBLED)
Yellow ButtonBlaster™ LED (YLWBBLED)

Lizard Lick has shipped:

114 IL Translucent Horizontal Pushbutton, White
110 IL Translucent Horizontal Pushbutton, Blue
157 LL Long Leaf-Switch Pushbutton, Translucent Blue
158 LL Long Leaf-Switch Pushbutton, Translucent Orange
153 LL Long Leaf-Switch Pushbutton, Black
168 LL Pushbutton Holder and Switch for Long Buttons
57 Happ Coin Reject Button, Red

Lots of spares there so I can pick and choose what I like.

Next up for order are a set of Data East side armor rails, one of those big red launch buttons and a storage unit to live in when the wife gets fed up and throws me out whistle.gif

Thanks to all on this site for the inspiration to get this going.

Edited by zebulon, 01 May 2011 - 07:29 PM.

 ZB%20%20Storefront1%20.png               [email protected]

Don't pm or expect an answer from me here ... the links above are my contacts.

I know so much about so little that I could teach you all there is to know about nothing......


#2 NicToria

NicToria

    Enthusiast

  • Gold Supporter
  • 137 posts
  • Location:Iowa.

  • Flag: United States of America

  • Favorite Pinball: Judge Dredd. Funhouse.. LOTR. Bad Cats, SM..T-2 .. Eight Ball Deluxe LE. Mousin Around

Posted 22 February 2011 - 12:36 AM

Looking good.... Keep the pics coming...

#3 Rawd

Rawd

    Pinball Wizard

  • VIP
  • 4,313 posts
  • Location:Edmonton, Canada

  • Flag: Canada

  • Favorite Pinball: Triple Strike



Posted 22 February 2011 - 12:37 AM

Nice! Welcome... dblthumb.gif


 


#4 faralos

faralos

    VPF Veteran

  • Members
  • PipPipPipPipPipPip
  • 7,838 posts
  • Location:Eastern Pa,USA

  • Flag: United States of America

  • Favorite Pinball: Flash (Williams) 1979, Flash2 Updated




  • Trophies:

Posted 22 February 2011 - 03:29 AM

welcome to the site! hi.gif nice looking cab ya' got going there, is that birch plywood? looks kind of light colored to be basic ply. and it looks full-sized! good workmanship though
"Don’t let the noise of others’ opinions drown out your own inner voice.
And most important, have the courage to follow your heart and intuition.”
----Steve Jobs


#5 chriz

chriz

    Enthusiast

  • Platinum Supporter
  • 451 posts

  • Flag: ---------

  • Favorite Pinball: Funhouse

Posted 22 February 2011 - 08:40 AM

welcome to the club! dblthumb.gif

cheers
Chris
 

 


#6 zebulon

zebulon

    Cantankerous old B****D

  • Platinum Supporter
  • 1,179 posts
  • Location:Whitby, Ontario, Canada

  • Flag: Canada

  • Favorite Pinball: xenon, Medieval Madness, Royal Flush, Silverball Mania

Posted 22 February 2011 - 12:59 PM

Thanks for looking everyone.

The cabinet is made of maple plywood (go figure, being Canadian and all). I've dadoed the sides, front and back of the base to give the bottom panel a little more support. The back box is fully removable and I plan on mounting the computer on a shelf in it. Everything is routed for some aluminum T molding that I have left from a restaurant renovation I did a few years back.

I'm hoping to leave some areas on the sides the natural finish as the artwork I have in mind is something like a poker hand of stripped play fields, but that's a long way off.

Started playing with the playfield mount and location last night. I still have to square and brace the base cabinet, as you can see, the floor is less than level.


 ZB%20%20Storefront1%20.png               [email protected]

Don't pm or expect an answer from me here ... the links above are my contacts.

I know so much about so little that I could teach you all there is to know about nothing......


#7 Itchigo

Itchigo

    Pinball Wizard

  • Members
  • PipPipPipPipPip
  • 2,782 posts
  • Location:Chicago, Illinois

  • Flag: United States of America

  • Favorite Pinball: All




  • Trophies:

Posted 22 February 2011 - 03:09 PM

Very Cool!! dblthumb.gif

Founder of Rogue Pinball! https://roguepinball.com/index.php                 Making Pinball great again!!

 

partylikeits1776-.jpg


#8 faralos

faralos

    VPF Veteran

  • Members
  • PipPipPipPipPipPip
  • 7,838 posts
  • Location:Eastern Pa,USA

  • Flag: United States of America

  • Favorite Pinball: Flash (Williams) 1979, Flash2 Updated




  • Trophies:

Posted 22 February 2011 - 07:08 PM

but the PF monitor is flat. Don't you want it at an angle to better see it? I noticed the dadoed joints, very professional! cuts out the need for internal bracing!and T=channel aluminum would look nice on the edges as long as you don't dent it too much and you protect it with maybe a polyurethane spray so it doesn't tarnish or discolor
"Don’t let the noise of others’ opinions drown out your own inner voice.
And most important, have the courage to follow your heart and intuition.”
----Steve Jobs


#9 callanbrown

callanbrown

    Hobbyist

  • Silver Supporter
  • 39 posts

  • Flag: Canada

  • Favorite Pinball: STTNG!

Posted 22 February 2011 - 07:25 PM

QUOTE (faralos @ Feb 22 2011, 02:08 PM) <{POST_SNAPBACK}>
but the PF monitor is flat. Don't you want it at an angle to better see it? I noticed the dadoed joints, very professional! cuts out the need for internal bracing!and T=channel aluminum would look nice on the edges as long as you don't dent it too much and you protect it with maybe a polyurethane spray so it doesn't tarnish or discolor


A lot of people do flat a flat PF. It's really a design choice. Mine is also installed this way, I think it emulates a real pin more accurately.

#10 zebulon

zebulon

    Cantankerous old B****D

  • Platinum Supporter
  • 1,179 posts
  • Location:Whitby, Ontario, Canada

  • Flag: Canada

  • Favorite Pinball: xenon, Medieval Madness, Royal Flush, Silverball Mania

Posted 22 February 2011 - 08:52 PM

QUOTE (callanbrown @ Feb 22 2011, 02:25 PM) <{POST_SNAPBACK}>
QUOTE (faralos @ Feb 22 2011, 02:08 PM) <{POST_SNAPBACK}>
but the PF monitor is flat. Don't you want it at an angle to better see it? I noticed the dadoed joints, very professional! cuts out the need for internal bracing!and T=channel aluminum would look nice on the edges as long as you don't dent it too much and you protect it with maybe a polyurethane spray so it doesn't tarnish or discolor


A lot of people do flat a flat PF. It's really a design choice. Mine is also installed this way, I think it emulates a real pin more accurately.





Actually, you're both right.

The sides ride higher at the rear giving it the look of lying flat, but in reality there's a 4 1/4" slope on the rails in the box


Edited by zebulon, 01 May 2011 - 07:30 PM.

 ZB%20%20Storefront1%20.png               [email protected]

Don't pm or expect an answer from me here ... the links above are my contacts.

I know so much about so little that I could teach you all there is to know about nothing......


#11 zebulon

zebulon

    Cantankerous old B****D

  • Platinum Supporter
  • 1,179 posts
  • Location:Whitby, Ontario, Canada

  • Flag: Canada

  • Favorite Pinball: xenon, Medieval Madness, Royal Flush, Silverball Mania

Posted 22 February 2011 - 10:06 PM

So here's the 1st of what I'm sure will be many questions.....

I know on the actual p2k machines the rear of the cab is raised higher than the front. I'm not so concerned with being true to the original design.

My question is, have many of you mounted the legs to keep the bottom of the base cabinet level, or is the standard to have the entire cabinet on an incline?

I've gone back through the pics of other's cabs and perspective makes it hard to tell which way the legs have been mounted.




Found the answer, mameman23's Dr Who build has plans detailing the mounting of the legs, standard I guess is a level base. I can always extend the levelers on the rear if needed.

Edited by zebulon, 22 February 2011 - 11:55 PM.

 ZB%20%20Storefront1%20.png               [email protected]

Don't pm or expect an answer from me here ... the links above are my contacts.

I know so much about so little that I could teach you all there is to know about nothing......


#12 zebulon

zebulon

    Cantankerous old B****D

  • Platinum Supporter
  • 1,179 posts
  • Location:Whitby, Ontario, Canada

  • Flag: Canada

  • Favorite Pinball: xenon, Medieval Madness, Royal Flush, Silverball Mania

Posted 23 February 2011 - 06:01 PM

A little more progress today:

Installed the forward support bolts for the backbox, went with T-nuts on the inside cab as I plan on sourcing some plastic hole plugs to fill the holes. The back box now hinges forward as a unit to gain access to the back.



Built and installed the computer shelf. It slides on rails to make it easier for removal from the backbox for servicing. Installed the cam lock for the back door.



The seam on the upper backdoor is driving me crazy but as the upper panel is glued and screwed there's not much I can do. At least it's at the back and I wont see it when the monitor is in place.

Finally, I installed the base bracing and corner supports for the legs.



 ZB%20%20Storefront1%20.png               [email protected]

Don't pm or expect an answer from me here ... the links above are my contacts.

I know so much about so little that I could teach you all there is to know about nothing......


#13 settingsons

settingsons

    Pinball Fan

  • VIP
  • 959 posts
  • Location:Switzerland

  • Flag: Switzerland

  • Favorite Pinball: Terminator 2 and many EM machines



Posted 23 February 2011 - 08:16 PM

A really neat job and I really like the design of the backbox. Look forward to seeing more.

#14 faralos

faralos

    VPF Veteran

  • Members
  • PipPipPipPipPipPip
  • 7,838 posts
  • Location:Eastern Pa,USA

  • Flag: United States of America

  • Favorite Pinball: Flash (Williams) 1979, Flash2 Updated




  • Trophies:

Posted 23 February 2011 - 08:56 PM

so now the backbox hinges just like a real pin! too cool! also better for transport, we used to drop the heads on all our pins for delivery so that they didn't crack off(we used to use open pickup trucks with an electric tailgate for transporting pins) they always had their backboxes dropped and were tarped too THEN tied in to the pickup rail sides. real safe huh? we used to have as many as 4 pins loaded in the pickup bed at one time!
you can always paint over that seam to cover it up! looking very professional!
as for that level PF monitor you say you want it to be like a real pin but a real PF does have a tilt to it so that the ball travels down the table! I just thought for better viewing (especially for kids and short people) it would be on a slight incline, but to each their own...
"Don’t let the noise of others’ opinions drown out your own inner voice.
And most important, have the courage to follow your heart and intuition.”
----Steve Jobs


#15 zebulon

zebulon

    Cantankerous old B****D

  • Platinum Supporter
  • 1,179 posts
  • Location:Whitby, Ontario, Canada

  • Flag: Canada

  • Favorite Pinball: xenon, Medieval Madness, Royal Flush, Silverball Mania

Posted 23 February 2011 - 10:10 PM

There is an incline, about 4 1/2" over a 36" length, I wanted the sides higher so that the playfield is more in the dark.

The backbox folds, but is so large that I'm not sure how much it helps with transport...lol




The legs are finally on, time to take a break and plan out some more........


 ZB%20%20Storefront1%20.png               [email protected]

Don't pm or expect an answer from me here ... the links above are my contacts.

I know so much about so little that I could teach you all there is to know about nothing......


#16 zebulon

zebulon

    Cantankerous old B****D

  • Platinum Supporter
  • 1,179 posts
  • Location:Whitby, Ontario, Canada

  • Flag: Canada

  • Favorite Pinball: xenon, Medieval Madness, Royal Flush, Silverball Mania

Posted 01 March 2011 - 01:46 AM

A brief update.

Finally received everything on order from Lizard Lick Amusements and Groovy Gamegear, plus I received a last minute order from Marco Specialties, so the side armor, buttons, pushbuttons, gp+led wiz etc are all waiting to be installed. Now I just need to be patient and wait until the weekend. blum.gif I really recommend any of these companies for their service and selection.


Installed a couple of mini fluorescents for the eventual marquee that will go under the screen. Still trying to come up with a name and an idea for the artwork.






I put 2 in there as I"m thinking of flashing one in attract mode, still a way's away from that part though.

 ZB%20%20Storefront1%20.png               [email protected]

Don't pm or expect an answer from me here ... the links above are my contacts.

I know so much about so little that I could teach you all there is to know about nothing......


#17 faralos

faralos

    VPF Veteran

  • Members
  • PipPipPipPipPipPip
  • 7,838 posts
  • Location:Eastern Pa,USA

  • Flag: United States of America

  • Favorite Pinball: Flash (Williams) 1979, Flash2 Updated




  • Trophies:

Posted 02 March 2011 - 04:49 AM

Pinzone? SpacePin? QuantumPin? just thought of these...InfiPin

Seems like everyone is going those black legs now, but damn they do look nicer than the chrome ones I remember! Very nice looking cab. I hope you have a nice dry place for it.
oh and use lexan plastic for the marquee if you can (it's almost bulletproof) paint it on the inside double layer it to protect it too with a clear one behind it

Edited by faralos, 02 March 2011 - 04:54 AM.

"Don’t let the noise of others’ opinions drown out your own inner voice.
And most important, have the courage to follow your heart and intuition.”
----Steve Jobs


#18 zebulon

zebulon

    Cantankerous old B****D

  • Platinum Supporter
  • 1,179 posts
  • Location:Whitby, Ontario, Canada

  • Flag: Canada

  • Favorite Pinball: xenon, Medieval Madness, Royal Flush, Silverball Mania

Posted 03 March 2011 - 12:24 AM

Thanks for the compliment Faralos, and the name suggestions.

Yeah, these legs are heading to the powdercoater's to get a textured black finish too. The rest of the trim is textured black so I think the legs would stand out too much if I didn't get them done the same.

 ZB%20%20Storefront1%20.png               [email protected]

Don't pm or expect an answer from me here ... the links above are my contacts.

I know so much about so little that I could teach you all there is to know about nothing......


#19 faralos

faralos

    VPF Veteran

  • Members
  • PipPipPipPipPipPip
  • 7,838 posts
  • Location:Eastern Pa,USA

  • Flag: United States of America

  • Favorite Pinball: Flash (Williams) 1979, Flash2 Updated




  • Trophies:

Posted 03 March 2011 - 09:33 AM

How about, I N P I N I T E
"Don’t let the noise of others’ opinions drown out your own inner voice.
And most important, have the courage to follow your heart and intuition.”
----Steve Jobs


#20 zebulon

zebulon

    Cantankerous old B****D

  • Platinum Supporter
  • 1,179 posts
  • Location:Whitby, Ontario, Canada

  • Flag: Canada

  • Favorite Pinball: xenon, Medieval Madness, Royal Flush, Silverball Mania

Posted 05 March 2011 - 02:01 PM

QUOTE (faralos @ Mar 3 2011, 04:33 AM) <{POST_SNAPBACK}>
How about, I N P I N I T E



As in "to INPINITE.....and beyond" ? laugh.gif

 ZB%20%20Storefront1%20.png               [email protected]

Don't pm or expect an answer from me here ... the links above are my contacts.

I know so much about so little that I could teach you all there is to know about nothing......