3 replies to this topic

[phantom89it]

Hi, to make two WS2812B strips interact with Doflinx, do I need to use a teesy with OctoWS2811 or is there another way?

I don't know if it's possible to use WLED.

 

Thanks

[DDH69]

Yes you need a Teensy / Wesmos controller setup via DOF.

 

I also support addressable LEDs via Pixelcade Pulse.

[phantom89it]

I'm trying to use Wesmos.

I uploaded the firmware and created the cabinet.xml file with Arnoz Tiny Tools.

I then generated the dof configuration with DOF Config Tool 3.0.

I put everything in the config folder, opened GlobalConfigEditor, and integrated the folder and the cabinet.xml file.

I created a combo, but nothing happens in game.

Do I need to do something in the doflinx configuration file?
Is there a way to test the individual steps?

The ultimate goal is to use the LEDs in Pinball FX.

[DDH69]

If your addressable LEDs are working through DOF, then simply having this in your DOFLinx.ini will get all the setup information needed. https://doflinx.gith...ldrvpathffffini

 

When you run DOFLinx with DEBUG=1  you can right-click and select a test option for ROM codes.  ROM = doflinx and code E25 should give you a shape on the back effects.