13 replies to this topic

[m3chstaa]

So I'll start off by saying a massive thank you to DDH69 for all your hard work! I got the animated backglasses working in Pinball FX3 with a 2-screen setup (no toys or LED's etc.) and I'm going to describe below what I did to get it working. However, I have a problem! If I play Pinball FX3 in Fullscreen mode then as soon as DOFLinx gets the B2S server to load the background, FX3 freezes and won't accept any input to navigate through the menus. After reading a little on this issue it was suggested that I try "Borderless Window" mode and indeed this stopped the freezing BUT the background covers the DMD! (I can alt-tab back to windows and the DMD then shows up but I would like the DMD to stay on top of the background). So can someone help me- how do I get the DMD to stay over the top of the B2S background in borderless window mode? Or alternatively, can I get FX3 to stop freezing in fullscreen mode?

 

Here is the process I followed: I installed latest version of DOF and DOFlinx. My first major problem was that I had no "directoutputconfig.ini" file. I tried to use the DOF config tool and found it way too complicated as I'm not using any toys or LED's etc. I finally got the tool to produce for me a directoutputconfig.ini file after telling it I had one LEDWIZ device (whatever that is). I read somewhere that if you have no toys or anything then the only relevant section of directoutputconfig.ini is the [colors DOF] section and so I removed loads of stuff leaving me with my file having just this:

 

[version]

version=3148

mindofversion=0.8

 

[Colors DOF]

 

White=#FFFFFFFF

Red=#FF0000FF

Lime=#00FF00FF

Blue=#0000FFFF

Yellow=#FFFF00FF

Cyan=#00FFFFFF

Magenta=#FF00FFFF

Silver=#C0C0C0FF

Gray=#808080FF

Brown=#800000FF

Olive=#808000FF

Green=#008000FF

Purple=#800080FF

Teal=#008080FF

Navy=#000080FF

Dark_red=#8B0000FF

Black=#000000FF

Firebrick=#B22222FF

Crimson=#DC143CFF

Tomato=#FF6347FF

Coral=#FF7F50FF

Indian_red=#CD5C5CFF

Light_coral=#F08080FF

Dark_salmon=#E9967AFF

Salmon=#FA8072FF

Light_salmon=#FFA07AFF

Orange_red=#FF4500FF

Dark_orange=#FF8C00FF

Orange=#FFA500FF

Gold=#FFD700FF

Dark_golden_rod=#B8860BFF

Golden_rod=#DAA520FF

Pale_golden_rod=#EEE8AAFF

Dark_khaki=#BDB76BFF

Khaki=#F0E68CFF

Yellow_green=#9ACD32FF

Dark_olive_green=#556B2FFF

Olive_drab=#6B8E23FF

Lawn_green=#7CFC00FF

Chart_reuse=#7FFF00FF

Green_yellow=#ADFF2FFF

Dark_green=#006400FF

Forest_green=#228B22FF

Lime_green=#32CD32FF

Light_green=#90EE90FF

Pale_green=#98FB98FF

Dark_sea_green=#8FBC8FFF

Medium_spring_green=#00FA9AFF

Spring_green=#00FF7FFF

Sea_green=#2E8B57FF

Medium_aqua_marine=#66CDAAFF

Medium_sea_green=#3CB371FF

Light_sea_green=#20B2AAFF

Dark_slate_gray=#2F4F4FFF

Dark_cyan=#008B8BFF

Aqua=#00FFFFFF

Light_cyan=#E0FFFFFF

Dark_turquoise=#00CED1FF

Turquoise=#40E0D0FF

Medium_turquoise=#48D1CCFF

Pale_turquoise=#AFEEEEFF

Aqua_marine=#7FFFD4FF

Powder_blue=#B0E0E6FF

Cadet_blue=#5F9EA0FF

Steel_blue=#4682B4FF

Corn_flower_blue=#6495EDFF

Deep_sky_blue=#00BFFFFF

Dodger_blue=#1E90FFFF

Light_blue=#ADD8E6FF

Sky_blue=#87CEEBFF

Light_sky_blue=#87CEFAFF

Midnight_blue=#191970FF

Dark_blue=#00008BFF

Medium_blue=#0000CDFF

Royal_blue=#4169E1FF

Blue_violet=#8A2BE2FF

Indigo=#4B0082FF

Dark_slate_blue=#483D8BFF

Slate_blue=#6A5ACDFF

Medium_slate_blue=#7B68EEFF

Medium_purple=#9370DBFF

Dark_magenta=#8B008BFF

Dark_violet=#9400D3FF

Dark_orchid=#9932CCFF

Medium_orchid=#BA55D3FF

Thistle=#D8BFD8FF

Plum=#DDA0DDFF

Violet=#EE82EEFF

Orchid=#DA70D6FF

Medium_violet_red=#C71585FF

Pale_violet_red=#DB7093FF

Deep_pink=#FF1493FF

Light_pink=#FFB6C1FF

Pink=#FFC0CBFF

Antique_white=#FAEBD7FF

Beige=#F5F5DCFF

Bisque=#FFE4C4FF

Corn_silk=#FFF8DCFF

Lemon_chiffon=#FFFACDFF

Light_golden_rod=#FAFAD2FF

Light_yellow=#FFFFE0FF

Saddle_brown=#8B4513FF

Sienna=#A0522DFF

Chocolate=#D2691EFF

Peru=#CD853FFF

Sandy_brown=#F4A460FF

Burly_wood=#DEB887FF

Tan=#D2B48CFF

Rosy_brown=#BC8F8FFF

Moccasin=#FFE4B5FF

Navajo_white=#FFDEADFF

Peach_puff=#FFDAB9FF

Misty_rose=#FFE4E1FF

Lavender_blush=#FFF0F5FF

Papaya_whip=#FFEFD5FF

Slate_gray=#708090FF

Light_slate_gray=#778899FF

Light_steel_blue=#B0C4DEFF

Lavender=#E6E6FAFF

Dim_gray=#696969FF

Dark_gray=#A9A9A9FF

Amber=#FFBF00FF

 

Now onto DOFLinx.ini. In the folder, "Sample INI files" I found a config file called "DOFLinx-FX3 B2S Backglass only-No toys" and so I renamed it to DOFLinx.ini and put it in the DirectOutput folder. After reading other advice I edited the file and added DIRECTOUTPUTCONFIG=c:\DirectOutput\config\directoutputconfig.ini to the very beginning and made sure "DISABLEDOF=YES" was in there too. I made sure that the paths were set up correctly. Here is my DOFLinx.ini:

 

----------------------------------------------------------------------------------------------------------------------

DIRECTOUTPUTCONFIG=c:\DirectOutput\config\directoutputconfig.ini

DEBUG=1

####

# The config file for DOFLinx to achieve B2S backglasses only with Pinball FX3

# 

# IMPORTANT - when used just for backglasses with FX3 and no output devices with toys, you must add this command line options for DOFLinx, 

DISABLEDOF=YES

#PROCESSES=Pinball FX3

#

# Edit this file as you see fit, lines that start with a hash (#) or are blank are not processed.  This blurb and comments can be cut out if you want.

####

 

# Point to your directoutputconfig.ini file.  Your file may have a number, ie directoutputconfig20.ini

# You can point to any of your directoutputconfig.ini files, but only one

# Keep this as the first pararameter to process in your INI file.  The order past ths point is not relevant

 

 

 

# The location of the .FX3 game specific files included with the DOFLinx release package

# Ensure your path has a \ on the end of it

 

PATH_FX3=C:\DirectOutput\FX3\

 

# The path to where you keep all of the .directb2s files that you've downloaded for use with FX3

# Ensure your path has a \ on the end of it

 

PATH_FX3_B2S=C:\DirectOutput\FX3_B2S\

 

# This is the folder where B2SServer.exe can be found on your system

 

PATH_B2S_SERVER=c:\Visual Pinball\Tables\

 

# The list of processes that can activate DOFLinx, in this case, just Pinball FX3

 

PROCESSES=Pinball FX3

 

# An over-ride to the default setting given this is just being used with Pinball FX3, not FX2, FP or other systems that may require the default delay

 

PROCESS_TO_ACTIVE_TIME=1

 

DIRECTOUTPUTGLOBAL=C:\DirectOutput\config\GlobalConfig_b2SServer.xml

 

------------------------------------------------------------------------------------------------------------------------------------

At this point I tried out FX3 and it didn't work! I checked the DOFlinx.log file and it said something about no valid output devices. After scratching my head for some time I finally found that the problem was that the B2S files could not be found since the package has all the B2S files zipped up in the "FX3_B2S" folder. I unzipped them and hey presto! The backgrounds started loading! I was ecstatic. For a short time haha. It's at this point I found that Pinball FX3 hangs in fullscreen mode. Changing to borderless window mode stops the hanging but then the DMD is covered by the background! Can anyone help?

 

[Outhere]

This is a normal problem  ---> Fullscreen mode B2S server FX3 freezes and won't accept any input to navigate through the menus.

It sounds like you have a 2 screen setup and the DMD is going Behind the B2S backglass?

Edited by Outhere, 01 April 2020 - 08:33 PM.

[m3chstaa]

This is a normal problem  ---> Fullscreen mode B2S server FX3 freezes and won't accept any input to navigate through the menus.

It sounds like you have a 2 screen setup and the DMD is going Behind the B2S backglass?

Yeah that's right, how do I stop that from happening and keep the DMD on top or the backglass behind?

 

Thanks, Lee.

[Outhere]

If you right click a VP table with a regular back glass is this the menu you get?

 B2S New.jpg   114.32KB   41 downloads
 

[m3chstaa]

If you right click a VP table with a regular back glass is this the menu you get?

B2S New.jpg
 

that's right yes, I can bring that menu up.

[Outhere]

Then try this

In your DOFLinx.ini file add the DEBUG=1 and re-DOFLinx
Then a window will open right click and you will have a menu click on test B2S
Put the name of the B2S file for FX3 in their and click OK
The backglass should start, Now right click the backglass and uncheck Bring BGs Form to the top save settings close restart the game and see what happens

[m3chstaa]

Then try this

In your DOFLinx.ini file add the DEBUG=1 and re-DOFLinx
Then a window will open right click and you will have a menu click on test B2S
Put the name of the B2S file for FX3 in their and click OK
The backglass should start, Now right click the backglass and uncheck Bring BGs Form to the top save settings close restart the game and see what happens

I believe that did it! Thank you so much for your help! 

 

[Outhere]

Good to hear

 

Then try this

In your DOFLinx.ini file add the DEBUG=1 and re-DOFLinx
Then a window will open right click and you will have a menu click on test B2S
Put the name of the B2S file for FX3 in their and click OK
The backglass should start, Now right click the backglass and uncheck Bring BGs Form to the top save settings close restart the game and see what happens

I believe that did it! Thank you so much for your help! 

 

 

 

[nanuk]

thx for the info i got here was able to setup my b2s under fx3 but is it possible to change the position and size of the dmd on each table or are we suck with the dmd alwais at the same place and same size ??

[Outhere]

thx for the info i got here was able to setup my b2s under fx3 but is it possible to change the position and size of the dmd on each table or are we suck with the dmd alwais at the same place and same size ??

I don't think it's possible with FX3
 

[nanuk]

 

thx for the info i got here was able to setup my b2s under fx3 but is it possible to change the position and size of the dmd on each table or are we suck with the dmd alwais at the same place and same size ??

I don't think it's possible with FX3

 

 

thx i hope they will fix that in future version especially for the bally and williams table
 

 

[sydaroa]

Hi all!

 

Since yesterday the b2s are not shown.

This is the log i have.

Is it possible that zen has made any updates and that doesn't work?

 

07-abr.-20 23:04:52.723 - DOF Linx for Pinball Emulators - DOFLinx by DDH69

07-abr.-20 23:04:52.731 - Starting up - version 7.14

07-abr.-20 23:04:52.733 - For support come and visit the community here http://www.vpforums....p?showforum=104

07-abr.-20 23:04:52.737 - Pre-Reading DOFLinx.INI startup config file details

07-abr.-20 23:04:52.847 - DEBUG enabled with showing of window True

07-abr.-20 23:04:53.066 - Joystick # 2 detected : 12 buttons   DPAD Z-Axis

07-abr.-20 23:04:53.071 - Reading DOFLinx.INI startup config file details

07-abr.-20 23:04:53.074 - Reading DirectOutputConfig file named c:\DirectOutput\config\directoutputconfig_onlycolors.ini

07-abr.-20 23:04:53.078 - Turning DEBUG off

07-abr.-20 23:04:53.106 - DEBUG enabled with showing of window True

07-abr.-20 23:04:53.113 - The parameter 'DISABLEDOF' with data 'YES' was not processed.  Realtime flag=False Process active flag=False

07-abr.-20 23:04:53.125 - Set Debug Privilege = Running as administrator so no action taken

07-abr.-20 23:05:07.347 - Found valid process name of 'Pinball FX3'

07-abr.-20 23:05:07.351 - Setting FX3 process ID to :8492

07-abr.-20 23:05:07.357 - Activated by process name : 'Pinball FX3'

07-abr.-20 23:05:07.363 - Named process detected and startup commenced

07-abr.-20 23:05:07.900 - FX3 EXE name=C:\Program Files (x86)\Steam\steamapps\common\Pinball FX3\Pinball FX3.exe Size=11022480 bytes, Dated 31/03/2020 16:30:24

07-abr.-20 23:05:07.908 - Applying memory offsets for FX3 version circa 10/12/19

07-abr.-20 23:05:07.922 - FX3 full link active

07-abr.-20 23:05:07.927 - Using full colour palette

07-abr.-20 23:05:07.932 - 122 colours added to the palette

07-abr.-20 23:05:08.915 - B2S file not found : FX3Logo

07-abr.-20 23:05:09.917 - B2S file not found : FX3Logo

07-abr.-20 23:05:10.917 - B2S file not found : FX3Logo

07-abr.-20 23:05:11.916 - B2S file not found : FX3Logo

07-abr.-20 23:05:12.917 - B2S file not found : FX3Logo

07-abr.-20 23:05:13.912 - B2S file not found : FX3Logo

07-abr.-20 23:05:14.916 - B2S file not found : FX3Logo

07-abr.-20 23:05:15.913 - B2S file not found : FX3Logo

07-abr.-20 23:05:16.916 - B2S file not found : FX3Logo

07-abr.-20 23:05:17.919 - B2S file not found : FX3Logo

07-abr.-20 23:05:18.978 - B2S file not found : FX3Logo

07-abr.-20 23:05:20.008 - B2S file not found : FX3Logo

07-abr.-20 23:05:21.126 - Loading FX3 configuration file C:\DirectOutput\DOFLinx_FX3\ALL_PRE.FX3

07-abr.-20 23:05:21.223 - Loading FX3 configuration file C:\DirectOutput\DOFLinx_FX3\WMSCirqusVoltaire.FX3

07-abr.-20 23:05:21.271 - Processing parameter 'FF_ROM' with data 'FX3_WMS_CIRQUSVOLTAIRE' in real-time

07-abr.-20 23:05:21.341 - Loading DOF 'Pinball' with ROM='FX3_WMS_CIRQUSVOLTAIRE'

07-abr.-20 23:05:21.488 - Processing parameter 'BACKGLASS_EXISTS' with data 'YES' in real-time

07-abr.-20 23:05:21.604 - Loading FX3 configuration file C:\DirectOutput\DOFLinx_FX3\ALL_POST.FX3

07-abr.-20 23:05:21.636 - B2S file not found : WMSCirqusVoltaire

07-abr.-20 23:05:21.719 - Using full colour palette

07-abr.-20 23:05:21.760 - 122 colours added to the palette

07-abr.-20 23:05:21.799 - Cabinet Mode = 0   Backglass Mode = 0

07-abr.-20 23:05:22.824 - Loading FX3 configuration file C:\DirectOutput\DOFLinx_FX3\ALL_PRE.FX3

07-abr.-20 23:05:22.893 - Loading FX3 configuration file C:\DirectOutput\DOFLinx_FX3\AdventureLand.FX3

07-abr.-20 23:05:22.939 - Processing parameter 'FF_ROM' with data 'FX3_AMUSEMENT' in real-time

07-abr.-20 23:05:22.988 - Loading DOF 'Pinball' with ROM='FX3_AMUSEMENT'

07-abr.-20 23:05:23.072 - Processing parameter 'BACKGLASS_EXISTS' with data 'YES' in real-time

07-abr.-20 23:05:23.131 - Loading FX3 configuration file C:\DirectOutput\DOFLinx_FX3\ALL_POST.FX3

07-abr.-20 23:05:23.174 - B2S file not found : AdventureLand

07-abr.-20 23:05:23.252 - Using full colour palette

07-abr.-20 23:05:23.294 - 122 colours added to the palette

07-abr.-20 23:05:23.339 - Cabinet Mode = 0   Backglass Mode = 0

07-abr.-20 23:05:24.386 - Loading FX3 configuration file C:\DirectOutput\DOFLinx_FX3\ALL_PRE.FX3

07-abr.-20 23:05:24.446 - Loading FX3 configuration file C:\DirectOutput\DOFLinx_FX3\BackToTheFuture.FX3

07-abr.-20 23:05:24.488 - Processing parameter 'FF_ROM' with data 'FX3_BTTF' in real-time

07-abr.-20 23:05:24.521 - Loading DOF 'Pinball' with ROM='FX3_BTTF'

07-abr.-20 23:05:24.591 - Processing parameter 'BACKGLASS_EXISTS' with data 'YES' in real-time

07-abr.-20 23:05:24.639 - Loading FX3 configuration file C:\DirectOutput\DOFLinx_FX3\ALL_POST.FX3

07-abr.-20 23:05:24.682 - B2S file not found : BackToTheFuture

07-abr.-20 23:05:24.753 - Using full colour palette

07-abr.-20 23:05:24.814 - 122 colours added to the palette

07-abr.-20 23:05:24.874 - Cabinet Mode = 0   Backglass Mode = 0

07-abr.-20 23:05:25.919 - Loading FX3 configuration file C:\DirectOutput\DOFLinx_FX3\ALL_PRE.FX3

07-abr.-20 23:05:26.020 - Loading FX3 configuration file C:\DirectOutput\DOFLinx_FX3\CivilWar.FX3

07-abr.-20 23:05:26.088 - Processing parameter 'FF_ROM' with data 'FX2_CIVILWAR' in real-time

07-abr.-20 23:05:26.116 - Loading DOF 'Pinball' with ROM='FX2_CIVILWAR'

07-abr.-20 23:05:26.191 - Processing parameter 'BACKGLASS_EXISTS' with data 'YES' in real-time

07-abr.-20 23:05:26.257 - Loading FX3 configuration file C:\DirectOutput\DOFLinx_FX3\ALL_POST.FX3

07-abr.-20 23:05:26.468 - B2S Backglass loaded - CivilWar

07-abr.-20 23:05:26.528 - Using full colour palette

07-abr.-20 23:05:26.565 - 122 colours added to the palette

07-abr.-20 23:05:26.618 - Cabinet Mode = 0   Backglass Mode = 0

07-abr.-20 23:05:37.181 - GAMEMODE mode=1 action #0 of 'FF_COLOUR,BLACK,RGB_DF,0'

07-abr.-20 23:05:37.195 - GAMEMODE mode=1 action #1 of 'FF_FLASHER,DV_FLOL,FL_FD,6,750,50,RANDOM'

07-abr.-20 23:05:37.207 - GAMEMODE mode=1 action #2 of 'FF_FLASHER,DV_FLOR,FL_FD,6,750,50,RANDOM'

07-abr.-20 23:05:37.220 - GAMEMODE mode=1 action #3 of 'FF_FLASHER,DV_FLIL,FL_FD,6,750,50,RANDOM'

07-abr.-20 23:05:37.231 - GAMEMODE mode=1 action #4 of 'FF_FLASHER,DV_FLIR,FL_FD,6,750,50,RANDOM'

07-abr.-20 23:05:37.244 - GAMEMODE mode=1 action #5 of 'FF_FLASHER,DV_FLCN,FL_FD,6,750,50,RANDOM'

07-abr.-20 23:05:37.254 - GAMEMODE mode=1 action #6 of 'FF_B2S,B2SSTARTANIMATION,TITLE'

07-abr.-20 23:05:37.281 - GAMEMODE mode=1 action #7 of 'FF_DOF,E424,-1'

07-abr.-20 23:05:44.491 - LAUNCHMODE mode=1 action #0 of 'FF_BUTTON,BUT_LB,BA_FL,10000,500'

07-abr.-20 23:05:44.515 - LAUNCHMODE mode=1 action #1 of 'FF_DOF,E310,-1'

07-abr.-20 23:06:08.153 - There are no OFF actions for GAMEMODE

07-abr.-20 23:06:19.998 - Activating process disappeared so stopping things

07-abr.-20 23:06:21.909 - Turning DEBUG off

08-abr.-20 00:06:45.150 - DOF Linx for Pinball Emulators - DOFLinx by DDH69

08-abr.-20 00:06:45.188 - Starting up - version 7.14

08-abr.-20 00:06:45.191 - For support come and visit the community here http://www.vpforums....p?showforum=104

08-abr.-20 00:06:45.195 - Pre-Reading DOFLinx.INI startup config file details

08-abr.-20 00:06:45.297 - DEBUG enabled with showing of window True

08-abr.-20 00:06:45.729 - Joystick # 2 detected : 12 buttons   DPAD Z-Axis

08-abr.-20 00:06:45.735 - Reading DOFLinx.INI startup config file details

08-abr.-20 00:06:45.738 - Reading DirectOutputConfig file named c:\DirectOutput\config\directoutputconfig_onlycolors.ini

08-abr.-20 00:06:45.744 - Turning DEBUG off

08-abr.-20 00:06:45.769 - DEBUG enabled with showing of window True

08-abr.-20 00:06:45.776 - The parameter 'DISABLEDOF' with data 'YES' was not processed.  Realtime flag=False Process active flag=False

08-abr.-20 00:06:45.813 - Set Debug Privilege = Set OK

08-abr.-20 00:07:11.084 - Shutting down

08-abr.-20 00:07:11.092 - Program close

08-abr.-20 00:07:58.295 - DOF Linx for Pinball Emulators - DOFLinx by DDH69

08-abr.-20 00:07:58.303 - Starting up - version 7.14

08-abr.-20 00:07:58.305 - For support come and visit the community here http://www.vpforums....p?showforum=104

08-abr.-20 00:07:58.309 - Pre-Reading DOFLinx.INI startup config file details

08-abr.-20 00:07:58.610 - Reading DOFLinx.INI startup config file details

08-abr.-20 00:07:58.613 - Reading DirectOutputConfig file named c:\DirectOutput\config\directoutputconfig_onlycolors.ini

08-abr.-20 16:02:34.427 - DOF Linx for Pinball Emulators - DOFLinx by DDH69

08-abr.-20 16:02:34.436 - Starting up - version 7.14

08-abr.-20 16:02:34.460 - For support come and visit the community here http://www.vpforums....p?showforum=104

08-abr.-20 16:02:34.465 - Pre-Reading DOFLinx.INI startup config file details

08-abr.-20 16:02:34.752 - Reading DOFLinx.INI startup config file details

08-abr.-20 16:02:34.754 - Reading DirectOutputConfig file named c:\DirectOutput\config\directoutputconfig_onlycolors.ini

09-abr.-20 20:35:02.589 - DOF Linx for Pinball Emulators - DOFLinx by DDH69

09-abr.-20 20:35:02.628 - Starting up - version 7.14

09-abr.-20 20:35:02.630 - For support come and visit the community here http://www.vpforums....p?showforum=104

09-abr.-20 20:35:02.635 - Pre-Reading DOFLinx.INI startup config file details

09-abr.-20 20:35:02.907 - !!! No valid output devices for DOFLinx were found ...... sorry about that !!!

09-abr.-20 20:35:02.910 - Reading DOFLinx.INI startup config file details

09-abr.-20 20:35:02.912 - Reading DirectOutputConfig file named c:\DirectOutput\config\directoutputconfig_onlycolors.ini

09-abr.-20 20:35:04.895 - !!! No valid output devices for DOFLinx were found ...... sorry about that !!!

09-abr.-20 20:48:03.404 - !!! No valid output devices for DOFLinx were found ...... sorry about that !!!

09-abr.-20 20:49:02.212 - DOF Linx for Pinball Emulators - DOFLinx by DDH69

09-abr.-20 20:49:02.219 - Starting up - version 7.14

09-abr.-20 20:49:02.221 - For support come and visit the community here http://www.vpforums....p?showforum=104

09-abr.-20 20:49:02.226 - Pre-Reading DOFLinx.INI startup config file details

09-abr.-20 20:49:02.519 - !!! No valid output devices for DOFLinx were found ...... sorry about that !!!

09-abr.-20 20:49:02.521 - Reading DOFLinx.INI startup config file details

09-abr.-20 20:49:02.524 - Reading DirectOutputConfig file named c:\DirectOutput\config\directoutputconfig_onlycolors.ini

09-abr.-20 20:49:04.511 - !!! No valid output devices for DOFLinx were found ...... sorry about that !!!

09-abr.-20 21:15:39.865 - DOF Linx for Pinball Emulators - DOFLinx by DDH69

09-abr.-20 21:15:39.873 - Starting up - version 7.14

09-abr.-20 21:15:39.874 - For support come and visit the community here http://www.vpforums....p?showforum=104

09-abr.-20 21:15:39.879 - Pre-Reading DOFLinx.INI startup config file details

09-abr.-20 21:15:40.129 - !!! No valid output devices for DOFLinx were found ...... sorry about that !!!

09-abr.-20 21:15:40.131 - Reading DOFLinx.INI startup config file details

09-abr.-20 21:15:40.134 - Reading DirectOutputConfig file named c:\DirectOutput\config\directoutputconfig_onlycolors.ini

09-abr.-20 21:15:40.191 - DEBUG enabled with showing of window True

09-abr.-20 21:15:40.207 - The parameter 'DISABLEDOF' with data 'YES' was not processed.  Realtime flag=False Process active flag=False

09-abr.-20 21:15:40.219 - Set Debug Privilege = Set OK

09-abr.-20 21:15:42.117 - !!! No valid output devices for DOFLinx were found ...... sorry about that !!!

09-abr.-20 21:16:05.884 - Shutting down

09-abr.-20 21:16:05.892 - Program close

09-abr.-20 21:19:40.287 - DOF Linx for Pinball Emulators - DOFLinx by DDH69

09-abr.-20 21:19:40.295 - Starting up - version 7.14

09-abr.-20 21:19:40.297 - For support come and visit the community here http://www.vpforums....p?showforum=104

09-abr.-20 21:19:40.302 - Pre-Reading DOFLinx.INI startup config file details

09-abr.-20 21:19:40.544 - Reading DOFLinx.INI startup config file details

09-abr.-20 21:19:40.546 - Reading DirectOutputConfig file named c:\DirectOutput\config\directoutputconfig_onlycolors.ini

09-abr.-20 21:19:40.607 - DEBUG enabled with showing of window True

09-abr.-20 21:19:40.628 - Set Debug Privilege = Set OK

09-abr.-20 21:20:04.816 - Found valid process name of 'Pinball FX3'

09-abr.-20 21:20:04.830 - Setting FX3 process ID to :5344

09-abr.-20 21:20:04.848 - Activated by process name : 'Pinball FX3'

09-abr.-20 21:20:04.857 - Named process detected and startup commenced

09-abr.-20 21:20:05.364 - Failed to attach to process handle = 0

09-abr.-20 21:20:05.368 - Failed to attach to FX3 process

09-abr.-20 21:20:05.373 - Using full colour palette

09-abr.-20 21:20:05.377 - 122 colours added to the palette

09-abr.-20 21:22:44.851 - Activating process disappeared so stopping things

09-abr.-20 21:23:13.019 - B2S Backglass loaded - AliensPinball

09-abr.-20 21:34:35.153 - Shutting down

09-abr.-20 21:34:35.160 - Program close

09-abr.-20 21:34:39.032 - DOF Linx for Pinball Emulators - DOFLinx by DDH69

09-abr.-20 21:34:39.040 - Starting up - version 7.14

09-abr.-20 21:34:39.042 - For support come and visit the community here http://www.vpforums....p?showforum=104

09-abr.-20 21:34:39.047 - Pre-Reading DOFLinx.INI startup config file details

09-abr.-20 21:34:39.301 - !!! No valid output devices for DOFLinx were found ...... sorry about that !!!

09-abr.-20 21:34:39.304 - Reading DOFLinx.INI startup config file details

09-abr.-20 21:34:39.307 - Reading DirectOutputConfig file named c:\DirectOutput\config\directoutputconfig_onlycolors.ini

09-abr.-20 21:34:39.365 - DEBUG enabled with showing of window True

09-abr.-20 21:34:39.374 - The parameter 'DISABLEDOF' with data 'YES' was not processed.  Realtime flag=False Process active flag=False

09-abr.-20 21:34:39.387 - Set Debug Privilege = Set OK

09-abr.-20 21:34:41.298 - !!! No valid output devices for DOFLinx were found ...... sorry about that !!!

09-abr.-20 21:34:53.466 - Shutting down

09-abr.-20 21:34:53.471 - Program close

09-abr.-20 21:35:12.547 - DOF Linx for Pinball Emulators - DOFLinx by DDH69

09-abr.-20 21:35:12.554 - Starting up - version 7.14

09-abr.-20 21:35:12.556 - For support come and visit the community here http://www.vpforums....p?showforum=104

09-abr.-20 21:35:12.561 - Pre-Reading DOFLinx.INI startup config file details

09-abr.-20 21:35:12.802 - !!! No valid output devices for DOFLinx were found ...... sorry about that !!!

09-abr.-20 21:35:12.805 - Reading DOFLinx.INI startup config file details

09-abr.-20 21:35:12.807 - Reading DirectOutputConfig file named c:\DirectOutput\config\directoutputconfig_onlycolors.ini

09-abr.-20 21:35:12.875 - DEBUG enabled with showing of window True

09-abr.-20 21:35:12.885 - The parameter 'DISABLEDOF' with data '1' was not processed.  Realtime flag=False Process active flag=False

09-abr.-20 21:35:12.896 - Set Debug Privilege = Set OK

09-abr.-20 21:35:14.785 - !!! No valid output devices for DOFLinx were found ...... sorry about that !!!

09-abr.-20 21:35:17.850 - Shutting down

09-abr.-20 21:35:17.855 - Program close

09-abr.-20 21:35:39.106 - DOF Linx for Pinball Emulators - DOFLinx by DDH69

09-abr.-20 21:35:39.114 - Starting up - version 7.14

09-abr.-20 21:35:39.116 - For support come and visit the community here http://www.vpforums....p?showforum=104

09-abr.-20 21:35:39.122 - Pre-Reading DOFLinx.INI startup config file details

09-abr.-20 21:35:39.359 - Reading DOFLinx.INI startup config file details

09-abr.-20 21:35:39.362 - Reading DirectOutputConfig file named c:\DirectOutput\config\directoutputconfig_onlycolors.ini

09-abr.-20 21:35:39.426 - DEBUG enabled with showing of window True

09-abr.-20 21:35:39.463 - Set Debug Privilege = Set OK

09-abr.-20 21:35:54.660 - Found valid process name of 'Pinball FX3'

09-abr.-20 21:35:54.674 - Setting FX3 process ID to :9816

09-abr.-20 21:35:54.684 - Activated by process name : 'Pinball FX3'

09-abr.-20 21:35:54.696 - Named process detected and startup commenced

09-abr.-20 21:35:55.209 - Failed to attach to process handle = 0

09-abr.-20 21:35:55.221 - Failed to attach to FX3 process

09-abr.-20 21:35:55.229 - Using full colour palette

09-abr.-20 21:35:55.236 - 122 colours added to the palette

09-abr.-20 21:36:12.621 - Activating process disappeared so stopping things

09-abr.-20 21:37:01.107 - Shutting down

09-abr.-20 21:37:01.113 - Program close

 

Regards

[DDH69]

The above log contains many attempts to startup DOFLinx.  Only the first one on 7/4 was successful.  What have you changed from that time?  Do you have a backup your setup to return to?

 

It certainly looks like you've changed the running permissions of things at the very least.

[sydaroa]

I don´t know how but now it works.