Jump to content



Photo
- - - - -

Doflinx Issue


  • Please log in to reply
16 replies to this topic

#1 Cadelle32

Cadelle32

    Hobbyist

  • Members
  • PipPip
  • 12 posts

  • Flag: United States of America

  • Favorite Pinball: Jack in the box

Posted 06 August 2019 - 07:12 PM

I recently had to reinstall everything to my cab and Dof works just fine however when I load Doflinx the matrix lights up as it should with the brightly lit DOFLINX but it then proceeds to shot down right away.  Any Ideas?  Log is as follows:

06-Aug-19 12:10:31.592 - DOF Linx for Pinball Emulators - DOFLinx by DDH69
06-Aug-19 12:10:31.597 - Starting up - version 6.71
06-Aug-19 12:10:31.598 - For support come and visit the community here http://www.vpforums....p?showforum=104
06-Aug-19 12:10:31.601 - Pre-Reading DOFLinx.INI startup config file details
06-Aug-19 12:10:31.654 - DEBUG enabled with showing of window True
06-Aug-19 12:10:33.513 - Found Teensy controller named 'LEDStripController'
06-Aug-19 12:10:33.529 - 0 Pinscape device(s) found
06-Aug-19 12:10:33.530 - 0 LEDWiz device(s) found
06-Aug-19 12:10:33.532 - 0 FTDI (Sainsmart) device(s) found
06-Aug-19 12:10:33.534 - 0 PacLED64 device(s) found
06-Aug-19 12:10:33.536 - 0 Ultimate IO device(s) found
06-Aug-19 12:10:33.538 - !!! No valid output devices for DOFLinx were found ...... sorry about that !!!
06-Aug-19 12:10:33.540 - Reading DOFLinx.INI startup config file details
06-Aug-19 12:10:33.543 - Reading DirectOutputConfig file named c:\DirectOutput\config\directoutputconfig30.ini
06-Aug-19 12:10:33.552 - Turning DEBUG off
06-Aug-19 12:10:33.570 - DEBUG enabled with showing of window True
06-Aug-19 12:10:35.553 - 0 Pinscape device(s) found
06-Aug-19 12:10:35.559 - 0 LEDWiz device(s) found
06-Aug-19 12:10:35.565 - 0 FTDI (Sainsmart) device(s) found
06-Aug-19 12:10:35.571 - 0 PacLED64 device(s) found
06-Aug-19 12:10:35.576 - 0 Ultimate IO device(s) found
06-Aug-19 12:10:35.580 - !!! No valid output devices for DOFLinx were found ...... sorry about that !!!
 



#2 Cadelle32

Cadelle32

    Hobbyist

  • Members
  • PipPip
  • 12 posts

  • Flag: United States of America

  • Favorite Pinball: Jack in the box

Posted 06 August 2019 - 07:37 PM

Sorry, here is the proper log 

 

06-Aug-19 12:35:20.001 - DOF Linx for Pinball Emulators - DOFLinx by DDH69
06-Aug-19 12:35:20.011 - Starting up - version 6.71
06-Aug-19 12:35:20.012 - For support come and visit the community here http://www.vpforums....p?showforum=104
06-Aug-19 12:35:20.015 - Pre-Reading DOFLinx.INI startup config file details
06-Aug-19 12:35:20.067 - DEBUG enabled with showing of window True
06-Aug-19 12:35:21.934 - Found Teensy controller named 'LEDStripController'
06-Aug-19 12:35:21.951 - 0 Pinscape device(s) found
06-Aug-19 12:35:21.952 - 0 LEDWiz device(s) found
06-Aug-19 12:35:21.954 - 0 FTDI (Sainsmart) device(s) found
06-Aug-19 12:35:21.956 - 0 PacLED64 device(s) found
06-Aug-19 12:35:21.958 - 0 Ultimate IO device(s) found
06-Aug-19 12:35:21.960 - !!! No valid output devices for DOFLinx were found ...... sorry about that !!!
06-Aug-19 12:35:21.962 - Reading DOFLinx.INI startup config file details
06-Aug-19 12:35:21.964 - Reading DirectOutputConfig file named c:\DirectOutput\config\directoutputconfig30.ini
06-Aug-19 12:35:21.974 - Turning DEBUG off
06-Aug-19 12:35:21.994 - DEBUG enabled with showing of window True
06-Aug-19 12:35:23.974 - 0 Pinscape device(s) found
06-Aug-19 12:35:23.980 - 0 LEDWiz device(s) found
06-Aug-19 12:35:23.986 - 0 FTDI (Sainsmart) device(s) found
06-Aug-19 12:35:23.991 - 0 PacLED64 device(s) found
06-Aug-19 12:35:23.998 - 0 Ultimate IO device(s) found
06-Aug-19 12:35:24.004 - !!! No valid output devices for DOFLinx were found ...... sorry about that !!!
06-Aug-19 12:35:28.161 - Found valid process name of 'Pinball FX3'
06-Aug-19 12:35:28.164 - Setting FX3 process ID to :8672
06-Aug-19 12:35:28.172 - Activated by process name : 'Pinball FX3'
06-Aug-19 12:35:28.177 - Named process detected and startup commenced
06-Aug-19 12:35:28.180 - Process has administration rights
06-Aug-19 12:35:28.697 - FX3 EXE name=C:\Program Files (x86)\Steam\steamapps\common\Pinball FX3\Pinball FX3.exe Size=17959568 bytes, Dated 7/6/2019 12:47:04 PM
06-Aug-19 12:35:28.702 - No matching size profile for FX3.EXE found - prepare to panic pinball may be broken
06-Aug-19 12:35:28.706 - FX3 information process failed to recognise the EXE, it may be a new FX3.EXE ..... now disabling the link
06-Aug-19 12:35:28.711 - Using full colour palette
06-Aug-19 12:35:28.720 - 122 colours added to the palette
06-Aug-19 12:36:34.036 - Activating process disappeared so stopping things
06-Aug-19 12:36:34.053 - 0 Pinscape device(s) found
06-Aug-19 12:36:34.061 - 0 LEDWiz device(s) found
06-Aug-19 12:36:34.070 - 0 FTDI (Sainsmart) device(s) found
06-Aug-19 12:36:34.078 - 0 PacLED64 device(s) found
06-Aug-19 12:36:34.086 - 0 Ultimate IO device(s) found
06-Aug-19 12:36:34.093 - !!! No valid output devices for DOFLinx were found ...... sorry about that !!!
 



#3 Outhere

Outhere

    Pinball Wizard

  • Platinum Supporter
  • 4,807 posts

  • Flag: United States of America

  • Favorite Pinball: M M

Posted 06 August 2019 - 07:53 PM

Try

https://www.vpforums...&showfile=12318



#4 Cadelle32

Cadelle32

    Hobbyist

  • Members
  • PipPip
  • 12 posts

  • Flag: United States of America

  • Favorite Pinball: Jack in the box

Posted 06 August 2019 - 08:19 PM

Same thing outhere, it loads, the matrix lights up, and I load FX3 and nothing happens



#5 Outhere

Outhere

    Pinball Wizard

  • Platinum Supporter
  • 4,807 posts

  • Flag: United States of America

  • Favorite Pinball: M M

Posted 06 August 2019 - 08:59 PM

add DEBUG=1 your DOFLinx.INI file, anywhere will do

Clear log, run game, post log


Also post your ini file



#6 Cadelle32

Cadelle32

    Hobbyist

  • Members
  • PipPip
  • 12 posts

  • Flag: United States of America

  • Favorite Pinball: Jack in the box

Posted 07 August 2019 - 08:31 PM

Here is the ini

As you can see Debug is already there.

This worked great up until I had to reinstall everything, all I did was make a backup of my directoutput folder then reinstalled and copied it back over after installing DOF.  DOF works great Doflinx starts but then craps out

 

 

####
# The config file for DOFLinx with most common settings as a sample
#
# Note - this works with LEDWiz, PacLed64, Pinscape, Ultimate I/O and Sainsmart (FTDI devices)
# Edit this file as you see fit, lines that start with a hash (#) or are blank are not processed.  This blurb and comments can be cut out if you want.
#
# Output devices outputs are entered in the format of
# device (D) and output number (#) in the format D##, so controller device 1 and output 3 is "103" without the quotes, controller board 2 output 23 is "223" without quotes
#
# The keyboard hex code for the key that is used for each flipper from https://msdn.microso...1(v=vs.85).aspx
#
####
# Point to your directoutputconfig.ini file.  Your file may have a number, ie directoutputconfig20.ini
# You can point to any of your directoutputconfig.ini files, but only one
# Keep this as the first pararameter to process in your INI file.  The order past ths point is not relevant
DIRECTOUTPUTCONFIG=c:\DirectOutput\config\directoutputconfig30.ini
 
# The location of the .FX3 game specific files included with the DOFLinx release package
# Ensure your path has a \ on the end of it
PATH_FX3=C:\DirectOutput\FX3\
# The path to where you keep all of the .directb2s files that you've downloaded for use with FX3
# Ensure your path has a \ on the end of it
PATH_FX3_B2S=C:\DirectOutput\DOFLinxdownload\FX3 Backglass\
# This is the folder where B2SServer.exe can be found on your system
PATH_B2S_SERVER=C:\Pinball\Visual Pinball\Tables\
 
# The list of processes that can activate DOFLinx, in this case, Pinball FX2, Pinball FX3 and Future Pinball
PROCESSES=Pinball FX3
DEBUG=1
# An over-ride to the default setting given this is just being used with Pinball FX3, not FX2, FP or other systems that may require the default delay
DIRECTOUTPUTGLOBAL=C:\DirectOutput\config\GlobalConfig_b2SServer.xml
PROCESS_TO_ACTIVE_TIME=1
# Set the key code for the keys being used as Left and Right flippers
# Used for the default fll back if a full link cannot be established
# Left Shift = A0, Right Shift = A1
# L_FLIPPER_KEY=A0
# R_FLIPPER_KEY=A1
# Just in case things go wrong (ie no keyup signal is detected, flipper held down for a long time), what is the maximum time a flipper solenoid / contactor can be in in milliseconds
# MAX_FLIPPER_ON=5000
# Use random colour order for the RGB undercabinet lighting
# RGB_STYLE=RANDOM
# Use the flipper key press to to cause undercabinet lighting to change
# RGB_TRIGGER=FLIPPER
# The minimum time for change between flipper flips, 1000mS or 1 second
# RGB_MIN_TIME=1000
# The red device / port for undercabinet lighting, device #1, port 29
# RGB_OUTPUT=129
# Turn on the attempt to make a full connection to Future Pinball when it is detected as running
# FP_ATTEMPT_LINK=1
# The device / port for the left and right flippers, set to output device 1, left flipper solenoid on port 1 and right flipper solenoid on port 2
# L_FLIPPER_OUTPUT=101
# R_FLIPPER_OUTPUT=102
# LINK_LF=101,50,10000,255
# LINK_RF=102,50,10000,255
# The other 8 solenoid of a 10 solenoid setup using ports 4 to 11 inclusive
# LINK_LS=104,50,500,255
# LINK_RS=105,50,500,255
# LINK_ML=106,50,500,255
# LINK_MC=107,50,500,255
# LINK_MR=108,50,500,255
# LINK_BL=109,50,500,255
# LINK_BC=110,50,500,255
# LINK_BR=111,50,500,255
# Ports for the shaker, gear motor, knocker, beacon and strobe using ports 12 - 16 inclusive
# LINK_SH=112,1000,5000,255
# LINK_GR=113,750,10000,255
# LINK_KN=114,120,500,255
# LINK_BK=115,FLASH,200,255
# LINK_SR=116,ON,0,255
# Ports for the lights inside the various buttons being Start, Extra Ball, Coin, Exit, Launch Ball and Fire for ports 17 to 22 inclusive
# LINK_ST=117
# LINK_EB=118
# LINK_CN=119
# LINK_EX=120
# LINK_LB=121
# LINK_FR=122
# The device and red ports for five flashers, these have been set in the example below as on the second output device, ie LEDWiz #2
# LINK_FLOL=201
# LINK_FLIL=204
# LINK_FLCN=207
# LINK_FLIR=210
# LINK_FLOR=213
#####
# Game specific colours in the formnat of a CSV of Game Name,Colour#1,Colour#2 - colours as they appear in your directoutputconfig
# Thanks to Vizzini here is a great starting list for Pinball FX2
# Extended for FX3 games by DDH69
#####
GAME_COLOUR=AlienIsolationPinball,Medium_Blue,Lime,Dodger_Blue,Lime_Green
GAME_COLOUR=AlienvsPredatorPinball,Medium_Blue,Lime_Green,Dodger_Blue,Yellow_Green
GAME_COLOUR=AliensPinball,Medium_Blue,Dark_Golden_Rod,Dodger_Blue
GAME_COLOUR=AmericanDadPinball,Medium_Blue,Lime_Green,Dodger_Blue,Yellow_Green
GAME_COLOUR=ArcherPinball,Medium_Blue,Yellow,Dodger_Blue,Blue_Violet
GAME_COLOUR=Biolab,Dark_Red,Lime,Blue,Cyan,Blue_Violet,Yellow
GAME_COLOUR=Blade,Blue,Blue_Violet,Salmon
GAME_COLOUR=BobaFett,Lime,Golden_Rod,Blue_Violet
GAME_COLOUR=BobsBurgersPinball,Medium_Blue,Lime_Green,Dark_Red,Dodger_Blue,Yellow_Green
GAME_COLOUR=CaptainAmerica,Blue,Dark_Red,Dodger_Blue,Gold
GAME_COLOUR=CastleStorm,Blue,Gold,Lime,Dodger_Blue,Orange,Lime_Green
GAME_COLOUR=CivilWar,Blue,Dark_Red,Dodger_Blue,Light_Salmon
GAME_COLOUR=Deadpool,Dark_Red,Blue,Medium_slate_blue,Dodger_Blue
GAME_COLOUR=DoomPinball,Yellow,Silver,Gray,Dark_Orange,Dim_Gray,Orange_Red,Peru,Crimson
GAME_COLOUR=DoctorStrange,Dark_Red,Blue,Gold,Lime_Green,Dark_Violet,Orange,Dodger_Blue,Lime,Medium_Slate_Blue
GAME_COLOUR=EarthDefense,Dark_Red,Blue,Gold,Dark_Violet,Orange,Dodger_Blue,Lime
GAME_COLOUR=ElDorado,Orange,Lime_Green,Yellow,Coral,Lime,Yellow_Green,Cyan
GAME_COLOUR=EpicQuest,Lime_Green,Dodger_Blue,Yellow_Green,Cyan
GAME_COLOUR=Excalibur,Dark_Red,Blue,Lime,Dodger_Blue,Cyan
GAME_COLOUR=FalloutPinball,Crimson,White,Red,Brown,Light_Steel_Blue,Slate_Blue
GAME_COLOUR=FamilyGuyPinball,Dodger_Blue,Lime_Green,Salmon,Dark_Violet,Yellow_Green
GAME_COLOUR=FantasticFour,Blue,Yellow,Dodger_Blue,Orange_Red
GAME_COLOUR=FearItself,Dark_Red,Blue,Yellow,Lime,Dark_Violet,Orange
GAME_COLOUR=GhostRider,Dodger_Blue,White,Yellow,Light_Salmon,Orange_Red
GAME_COLOUR=GuardiansoftheGalaxy,Dodger_Blue,Orange,Medium_Purple
GAME_COLOUR=IRONMAN,Blue,Dark_Red,Dodger_Blue,Gold
GAME_COLOUR=Mars,Blue,Yellow,Deep_sky_blue,Gold
GAME_COLOUR=MarvelsAntMan,Medium_Blue,Dark_Red,Dodger_Blue
GAME_COLOUR=MarvelsAvengersAgeofUltron,Dark_Red,Dodger_Blue,Lime_Green,Light_Salmon,Cyan
GAME_COLOUR=MarvelsTheAvengers,Blue,Dark_Red,Dodger_Blue,Gold
GAME_COLOUR=MarvelsWomenofPowerAForce,Red,Lime,Gold,Slate_Blue,Tomato,Silver,Dark_Orchid,Spring_Green
GAME_COLOUR=MarvelsWomenofPowerChampions,Dodger_Blue,Yellow,Red,Gray,Golden_Rod,Crimson,Orange
GAME_COLOUR=MoonKnight,Dodger_Blue,Blue,Cyan,Royal_Blue
GAME_COLOUR=MsSplosionMan,Dodger_Blue,Pink,Medium_Blue,Purple,Royal_Blue
GAME_COLOUR=Paranormal,Lime_Green,Dodger_Blue,Yellow_Green
GAME_COLOUR=Pasha,Dark_Violet,Golden_Rod,Dodger_Blue
GAME_COLOUR=PlantsVSZombies,Lime_Green,Yellow_Green,Dodger_Blue
GAME_COLOUR=Portal,Dodger_Blue,Yellow_Green,Medium_Blue,Yellow
GAME_COLOUR=Rome,Dark_Red,Gold,Dodger_Blue,Light_Salmon,Yellow_Green,Orange
GAME_COLOUR=SecretsoftheDeep,Blue,Yellow,Dodger_Blue
GAME_COLOUR=Shaman,Dark_Red,Blue,Gold,Dark_Violet,Orange,Dodger_Blue,Lime
GAME_COLOUR=SorcerersLair,Blue,Blue_Violet,Dodger_Blue,Slate_Blue
GAME_COLOUR=SouthParkButtersVeryOwnPinballGame,Dark_Red,Blue,Gold,Dark_Violet,Orange,Dodger_Blue,Lime_Green
GAME_COLOUR=SouthParkSuperSweetPinball,Dark_Red,Lime,Blue,Gold,Dark_Violet,Orange,Dodger_Blue,Lime_Green,Yellow_Green
GAME_COLOUR=SpiderMan,Dark_Red,Lime,Blue,Gold,Dark_Violet,Orange
GAME_COLOUR=STARWARSDARTHVADER,Light_sky_blue,Dark_Red,Cyan
GAME_COLOUR=StarWarsEpisodeVTheEmpireStrikesBack,Medium_Blue,Yellow,Dark_Red,Dodger_Blue
GAME_COLOUR=StarWarsEpisodeVIReturnoftheJedi,Slate_Blue,Golden_Rod,Medium_Blue,Lime_Green,Dodger_Blue,Yellow
GAME_COLOUR=StarWarsPinballDroids,Medium_Blue,Yellow,Orange,Navy,Gold,Orange_Red
GAME_COLOUR=StarWarsPinballEpisodeIVANewHope,Cyan,Golden_Rod,Dodger_Blue,Yellow
GAME_COLOUR=StarWarsPinballHanSolo,Dodger_Blue,Royal_Blue,Antique_White
GAME_COLOUR=StarWarsPinballMastersoftheForce,Medium_Blue,Salmon,Dodger_Blue,Purple,Cyan,Dark_Red
GAME_COLOUR=StarWarsPinballMightoftheFirstOrder,Light_sky_blue,Dodger_Blue,Dark_Red,Cyan
GAME_COLOUR=StarWarsPinballStarWarsRebels,Medium_Blue,Yellow,Royal_Blue,Orange_Red,Purple,Lime_Green
GAME_COLOUR=StarWarsPinballTheForceAwakens,Dark_Red,Medium_Blue,Blue_Violet
GAME_COLOUR=StarWarsPinballRogueOne,Gray,Silver,Light_Sky_Blue,Teal,Beige,Bisque,Aqua_Marine,Slate_Gray,Dark_Orange
GAME_COLOUR=StarWarsStarfighterAssault,Medium_Blue,Dodger_Blue,Dark_Red
GAME_COLOUR=StarWarsTheCloneWars,Dark_Red,Pink,Medium_Blue,Medium_Turquoise,Lime,Lime_Green
GAME_COLOUR=SuperLeagueASRoma,Lime_Green,Orange,Lime,Yellow,Red
GAME_COLOUR=SuperLeagueZenStudiosFC,Lime_Green,Orange,Lime,Yellow,Red
GAME_COLOUR=SuperLeagueArsenalFC,Lime_Green,Orange,Lime,Yellow,Red
GAME_COLOUR=SuperLeagueLiverpoolFC,Lime_Green,Orange,Lime,Yellow,Red
GAME_COLOUR=SuperLeagueJuventus,Lime_Green,Orange,Lime,Yellow,Red
GAME_COLOUR=SuperLeagueACMilan,Lime_Green,Orange,Lime,Yellow,Red
GAME_COLOUR=SuperLeagueRealMadridCF,Lime_Green,Medium_Blue,Lime,Yellow,Red
GAME_COLOUR=SuperLeagueFCBarcelona,Slate_Blue,Lime_Green,Yellow,Blue_Violet,Lime,Red
GAME_COLOUR=Tesla,Lime_Green,Yellow_Green,Dodger_Blue,Golden_Rod
GAME_COLOUR=TheElderScrollsVSkyrimPinball,Light_Slate_Gray,Gold,Golden_Rod,Dark_Sea_Green,Peru,Tan
GAME_COLOUR=TheInfinity Gauntlet,Dark_Red,Blue,Gold,Dark_Violet,Orange,Dodger_Blue,Lime
GAME_COLOUR=TheWalkingDead,Lime_Green,Royal_Blue,Yellow_Green
GAME_COLOUR=Thor,Dark_Red,Blue,Gold,Dark_Violet,Orange,Dodger_Blue,Lime
GAME_COLOUR=V12,Dark_Red,Blue,Gold,Dark_Violet,Orange,Dodger_Blue
GAME_COLOUR=Venom,Dark_Red,Blue,Dark_Violet,Dodger_Blue
GAME_COLOUR=WildWestRampage,Yellow_Green,Dodger_Blue,Royal_Blue
GAME_COLOUR=Wolverine,Dark_Red,Medium_Blue,Yellow,Dark_Violet
GAME_COLOUR=WorldWarHulk,Lime_Green,Yellow_Green,Dodger_Blue,Lime,Yellow
GAME_COLOUR=XMen,Blue,Blue_Violet,Gold,Dodger_Blue,Slate_Blue,Orange
GAME_COLOUR=ET,Yellow,Amber,Sky_blue,Sienna,Aqua_marine,Slate_gray,Dark_olive_green
GAME_COLOUR=BacktotheFuture,Light_steel_blue,White,Crimson,Gray,Teal,Yellow,Dodger_blue
GAME_COLOUR=Jaws,Dark_turquoise,Gray,White,Salmon,Light_coral,Tan,Papaya_whip,Peru
GAME_COLOUR=SonofZeus,Dark_orange,Silver,Dark_salmon,Amber,Sienna,Light_steel_blue,Firebrick
GAME_COLOUR=AdventureLand,Red,Cyan,Yellow,White,Medium_orchid,Aqua,Dark_turquoise,Medium_purple
GAME_COLOUR=JurassicPark,Lawn_green,Amber,Yellow,Light_slate_gray,Cadet_blue,Black,Rosy_brown,Light_steel_blue,Medium_sea_green,Silver
GAME_COLOUR=JurassicWorld,Light_steel_blue,Silver,Tan,Forest_green,Gray,Cadet_blue,Yellow_green,Teal,Bisque
GAME_COLOUR=JurassicMayhem,Sandy_brown,Forest_green,Dark_green,Dark_olive_green,Dark_khaki,Peru,Tan,Navajo_white,Beige,Dark_golden_rod,Corn_silk
GAME_COLOUR=StarWarsLastJedi,Gold,Orange_Red,Aqua,Coral,Dark_Khaki,Light_Steel_Blue,Yellow_Green,Steel_Blue
GAME_COLOUR=StarWarsAhchToIsland,Peru,Tan,Light_Slate_Gray,Light_Golden_Rod,Turquoise,Deep_Sky_Blue,Spring_Green,Steel_Blue
GAME_COLOUR=WMSFishTales,Forest_green,Medium_spring_green,Pale_green,Aqua,Blue,Golden_Rod,Dark_turquoise,Gold,Deep_sky_blue,Sandy_brown,Green
GAME_COLOUR=WMSGetaway,Red,Steel_blue,Dim_gray,Navy,Dark_red,Teal
GAME_COLOUR=WMSJunkyard,Amber,Lawn_green,Burly_wood,Orange,Peru,Dark_turquoise
GAME_COLOUR=WMSMedievalMadness,Yellow,Amber,Rosy_brown,Firebrick,Forest_green,Gray,Dark_salmon,Dark_orange
GAME_COLOUR=WMSAFM,White,Red,Lime,Amber,Sea_green,Forest_green,Turquoise,Corn_silk
GAME_COLOUR=WMSBlackRose,Khaki,Sky_blue,Orange_red,Gold,Aqua_marine,Tomato,Yellow_green
GAME_COLOUR=WMSPartyZone,Lime,Blue_violet,Orange,Purple,Aqua,Red,Medium_blue,Amber,Yellow,Sandy_brown,Deep_pink
GAME_COLOUR=StarWarsSolo,Burly_Wood,Medium_Sea_Green,Light_Salmon,Silver,Golden_Rod,Dark_Turquoise
GAME_COLOUR=StarWarsCalrissianChronicles,Yellow,Silver,Light_Blue,Gold,White,Amber,Dark_Salmon,Navajo_White
GAME_COLOUR=StarWarsBattleOfMimban,Coral,Gray,Dark_Orange,Salmon,Slate_Gray,Light_Steel_Blue,Peru,Tan
GAME_COLOUR=BallySafeCracker,Orange,Gold,Yellow,Orange_Red,Turquoise,Antique_White,Dim_Gray,Golden_Rod,Crimson
GAME_COLOUR=BallyTheatreOfMagic,Gold,Medium_Slate_Blue,Tomato,Light_Yellow,Plum,Orchid,Golden_Rod,Crimson,Silver
GAME_COLOUR=BallyTheChampionPub,Forest_Green,Gold,Orange_Red,Dark_Blue,Green,Red,Light_Green


#7 Outhere

Outhere

    Pinball Wizard

  • Platinum Supporter
  • 4,807 posts

  • Flag: United States of America

  • Favorite Pinball: M M

Posted 07 August 2019 - 08:42 PM

Clear log, run game, post log



#8 Cadelle32

Cadelle32

    Hobbyist

  • Members
  • PipPip
  • 12 posts

  • Flag: United States of America

  • Favorite Pinball: Jack in the box

Posted 07 August 2019 - 08:45 PM

And here is the log again

 

07-Aug-19 13:44:07.115 - DOF Linx for Pinball Emulators - DOFLinx by DDH69
07-Aug-19 13:44:07.129 - Starting up - version 6.82
07-Aug-19 13:44:07.131 - For support come and visit the community here http://www.vpforums....p?showforum=104
07-Aug-19 13:44:07.134 - Pre-Reading DOFLinx.INI startup config file details
07-Aug-19 13:44:07.187 - DEBUG enabled with showing of window True
07-Aug-19 13:44:09.046 - Found Teensy controller named 'LEDStripController'
07-Aug-19 13:44:09.062 - 0 Pinscape device(s) found
07-Aug-19 13:44:09.064 - 0 LEDWiz device(s) found
07-Aug-19 13:44:09.065 - 0 FTDI (Sainsmart) device(s) found
07-Aug-19 13:44:09.067 - 0 PacLED64 device(s) found
07-Aug-19 13:44:09.069 - 0 Ultimate IO device(s) found
07-Aug-19 13:44:09.071 - !!! No valid output devices for DOFLinx were found ...... sorry about that !!!
07-Aug-19 13:44:09.073 - Reading DOFLinx.INI startup config file details
07-Aug-19 13:44:09.076 - Reading DirectOutputConfig file named c:\DirectOutput\config\directoutputconfig30.ini
07-Aug-19 13:44:09.086 - Turning DEBUG off
07-Aug-19 13:44:09.103 - DEBUG enabled with showing of window True
07-Aug-19 13:44:11.086 - 0 Pinscape device(s) found
07-Aug-19 13:44:11.092 - 0 LEDWiz device(s) found
07-Aug-19 13:44:11.097 - 0 FTDI (Sainsmart) device(s) found
07-Aug-19 13:44:11.103 - 0 PacLED64 device(s) found
07-Aug-19 13:44:11.109 - 0 Ultimate IO device(s) found
07-Aug-19 13:44:11.115 - !!! No valid output devices for DOFLinx were found ...... sorry about that !!!
07-Aug-19 13:44:33.120 - Shutting down
07-Aug-19 13:44:33.124 - Program close
 



#9 Cadelle32

Cadelle32

    Hobbyist

  • Members
  • PipPip
  • 12 posts

  • Flag: United States of America

  • Favorite Pinball: Jack in the box

Posted 07 August 2019 - 08:57 PM

And this is the log when I run FX3

 

07-Aug-19 13:55:41.748 - DOF Linx for Pinball Emulators - DOFLinx by DDH69
07-Aug-19 13:55:41.754 - Starting up - version 6.82
07-Aug-19 13:55:41.755 - For support come and visit the community here http://www.vpforums....p?showforum=104
07-Aug-19 13:55:41.759 - Pre-Reading DOFLinx.INI startup config file details
07-Aug-19 13:55:41.819 - DEBUG enabled with showing of window True
07-Aug-19 13:55:43.816 - Found Teensy controller named 'LEDStripController'
07-Aug-19 13:55:43.833 - 0 Pinscape device(s) found
07-Aug-19 13:55:43.835 - 0 LEDWiz device(s) found
07-Aug-19 13:55:43.836 - 0 FTDI (Sainsmart) device(s) found
07-Aug-19 13:55:43.838 - 0 PacLED64 device(s) found
07-Aug-19 13:55:43.840 - 0 Ultimate IO device(s) found
07-Aug-19 13:55:43.842 - !!! No valid output devices for DOFLinx were found ...... sorry about that !!!
07-Aug-19 13:55:43.845 - Reading DOFLinx.INI startup config file details
07-Aug-19 13:55:43.848 - Reading DirectOutputConfig file named c:\DirectOutput\config\directoutputconfig30.ini
07-Aug-19 13:55:43.857 - Turning DEBUG off
07-Aug-19 13:55:43.879 - DEBUG enabled with showing of window True
07-Aug-19 13:55:45.854 - 0 Pinscape device(s) found
07-Aug-19 13:55:45.857 - 0 LEDWiz device(s) found
07-Aug-19 13:55:45.861 - 0 FTDI (Sainsmart) device(s) found
07-Aug-19 13:55:45.864 - 0 PacLED64 device(s) found
07-Aug-19 13:55:45.869 - 0 Ultimate IO device(s) found
07-Aug-19 13:55:45.872 - !!! No valid output devices for DOFLinx were found ...... sorry about that !!!
07-Aug-19 13:55:46.964 - Found valid process name of 'Pinball FX3'
07-Aug-19 13:55:46.967 - Setting FX3 process ID to :7576
07-Aug-19 13:55:46.975 - Activated by process name : 'Pinball FX3'
07-Aug-19 13:55:46.980 - Named process detected and startup commenced
07-Aug-19 13:55:46.985 - This process does not have administration rights so can not establish a full FX3 link
07-Aug-19 13:55:46.990 - Using full colour palette
07-Aug-19 13:55:46.993 - 122 colours added to the palette
07-Aug-19 13:56:43.780 - Activating process disappeared so stopping things
07-Aug-19 13:56:43.790 - 0 Pinscape device(s) found
07-Aug-19 13:56:43.799 - 0 LEDWiz device(s) found
07-Aug-19 13:56:43.807 - 0 FTDI (Sainsmart) device(s) found
07-Aug-19 13:56:43.815 - 0 PacLED64 device(s) found
07-Aug-19 13:56:43.822 - 0 Ultimate IO device(s) found
07-Aug-19 13:56:43.830 - !!! No valid output devices for DOFLinx were found ...... sorry about that !!!
 



#10 Outhere

Outhere

    Pinball Wizard

  • Platinum Supporter
  • 4,807 posts

  • Flag: United States of America

  • Favorite Pinball: M M

Posted 07 August 2019 - 09:28 PM

Make sure that DOFLinx runs as admin



#11 Cadelle32

Cadelle32

    Hobbyist

  • Members
  • PipPip
  • 12 posts

  • Flag: United States of America

  • Favorite Pinball: Jack in the box

Posted 07 August 2019 - 10:40 PM

Well were getting closer, I made Doflinx run as Admin, this time no Doflinx words came up, however when I started FX3 the Matrix lit up and lights danced around for a bit then went out and nothing happened after that, I restart the table and again lights up for a few then nothing.  

 

Here is the log

 

07-Aug-19 13:55:41.748 - DOF Linx for Pinball Emulators - DOFLinx by DDH69
07-Aug-19 13:55:41.754 - Starting up - version 6.82
07-Aug-19 13:55:41.755 - For support come and visit the community here http://www.vpforums....p?showforum=104
07-Aug-19 13:55:41.759 - Pre-Reading DOFLinx.INI startup config file details
07-Aug-19 13:55:41.819 - DEBUG enabled with showing of window True
07-Aug-19 13:55:43.816 - Found Teensy controller named 'LEDStripController'
07-Aug-19 13:55:43.833 - 0 Pinscape device(s) found
07-Aug-19 13:55:43.835 - 0 LEDWiz device(s) found
07-Aug-19 13:55:43.836 - 0 FTDI (Sainsmart) device(s) found
07-Aug-19 13:55:43.838 - 0 PacLED64 device(s) found
07-Aug-19 13:55:43.840 - 0 Ultimate IO device(s) found
07-Aug-19 13:55:43.842 - !!! No valid output devices for DOFLinx were found ...... sorry about that !!!
07-Aug-19 13:55:43.845 - Reading DOFLinx.INI startup config file details
07-Aug-19 13:55:43.848 - Reading DirectOutputConfig file named c:\DirectOutput\config\directoutputconfig30.ini
07-Aug-19 13:55:43.857 - Turning DEBUG off
07-Aug-19 13:55:43.879 - DEBUG enabled with showing of window True
07-Aug-19 13:55:45.854 - 0 Pinscape device(s) found
07-Aug-19 13:55:45.857 - 0 LEDWiz device(s) found
07-Aug-19 13:55:45.861 - 0 FTDI (Sainsmart) device(s) found
07-Aug-19 13:55:45.864 - 0 PacLED64 device(s) found
07-Aug-19 13:55:45.869 - 0 Ultimate IO device(s) found
07-Aug-19 13:55:45.872 - !!! No valid output devices for DOFLinx were found ...... sorry about that !!!
07-Aug-19 13:55:46.964 - Found valid process name of 'Pinball FX3'
07-Aug-19 13:55:46.967 - Setting FX3 process ID to :7576
07-Aug-19 13:55:46.975 - Activated by process name : 'Pinball FX3'
07-Aug-19 13:55:46.980 - Named process detected and startup commenced
07-Aug-19 13:55:46.985 - This process does not have administration rights so can not establish a full FX3 link
07-Aug-19 13:55:46.990 - Using full colour palette
07-Aug-19 13:55:46.993 - 122 colours added to the palette
07-Aug-19 13:56:43.780 - Activating process disappeared so stopping things
07-Aug-19 13:56:43.790 - 0 Pinscape device(s) found
07-Aug-19 13:56:43.799 - 0 LEDWiz device(s) found
07-Aug-19 13:56:43.807 - 0 FTDI (Sainsmart) device(s) found
07-Aug-19 13:56:43.815 - 0 PacLED64 device(s) found
07-Aug-19 13:56:43.822 - 0 Ultimate IO device(s) found
07-Aug-19 13:56:43.830 - !!! No valid output devices for DOFLinx were found ...... sorry about that !!!
07-Aug-19 15:08:57.204 - Shutting down
07-Aug-19 15:08:57.242 - Program close
07-Aug-19 15:10:54.652 - DOF Linx for Pinball Emulators - DOFLinx by DDH69
07-Aug-19 15:10:54.683 - Starting up - version 6.82
07-Aug-19 15:10:54.683 - For support come and visit the community here http://www.vpforums....p?showforum=104
07-Aug-19 15:10:54.683 - Pre-Reading DOFLinx.INI startup config file details
07-Aug-19 15:10:54.730 - DEBUG enabled with showing of window True
07-Aug-19 15:10:56.944 - Found Teensy controller named 'LEDStripController'
07-Aug-19 15:10:56.965 - 0 Pinscape device(s) found
07-Aug-19 15:10:56.967 - 0 LEDWiz device(s) found
07-Aug-19 15:10:56.968 - 0 FTDI (Sainsmart) device(s) found
07-Aug-19 15:10:56.971 - 0 PacLED64 device(s) found
07-Aug-19 15:10:56.973 - 0 Ultimate IO device(s) found
07-Aug-19 15:10:56.975 - !!! No valid output devices for DOFLinx were found ...... sorry about that !!!
07-Aug-19 15:10:56.977 - Reading DOFLinx.INI startup config file details
07-Aug-19 15:10:56.980 - Reading DirectOutputConfig file named c:\DirectOutput\config\directoutputconfig30.ini
07-Aug-19 15:10:56.989 - Turning DEBUG off
07-Aug-19 15:10:57.007 - DEBUG enabled with showing of window True
07-Aug-19 15:10:58.958 - 0 Pinscape device(s) found
07-Aug-19 15:10:58.961 - 0 LEDWiz device(s) found
07-Aug-19 15:10:58.963 - 0 FTDI (Sainsmart) device(s) found
07-Aug-19 15:10:58.966 - 0 PacLED64 device(s) found
07-Aug-19 15:10:58.968 - 0 Ultimate IO device(s) found
07-Aug-19 15:10:58.970 - !!! No valid output devices for DOFLinx were found ...... sorry about that !!!
07-Aug-19 15:11:13.148 - Found valid process name of 'Pinball FX3'
07-Aug-19 15:11:13.187 - Setting FX3 process ID to :9420
07-Aug-19 15:11:13.816 - Activated by process name : 'Pinball FX3'
07-Aug-19 15:11:13.821 - Named process detected and startup commenced
07-Aug-19 15:11:13.827 - Process has administration rights
07-Aug-19 15:11:14.393 - FX3 EXE name=C:\Program Files (x86)\Steam\steamapps\common\Pinball FX3\Pinball FX3.exe Size=17959568 bytes, Dated 7/6/2019 12:47:04 PM
07-Aug-19 15:11:14.398 - Applying memory offsets for FX3 version circa 29/5/19
07-Aug-19 15:11:14.406 - FX3 full link active
07-Aug-19 15:11:14.410 - Using full colour palette
07-Aug-19 15:11:14.421 - 122 colours added to the palette
07-Aug-19 15:11:36.830 - Loading FX3 configuration file C:\DirectOutput\FX3\ALL_PRE.FX3
07-Aug-19 15:11:36.944 - Loading FX3 configuration file C:\DirectOutput\FX3\WMSWhiteWater.FX3
07-Aug-19 15:11:38.663 - Loading FX3 configuration file C:\DirectOutput\FX3\ALL_POST.FX3
07-Aug-19 15:11:38.695 - B2S file not found : WMSWhiteWater
07-Aug-19 15:11:38.743 - Using full colour palette
07-Aug-19 15:11:38.751 - 122 colours added to the palette
07-Aug-19 15:11:38.758 - Cabinet Mode = 0   Backglass Mode = 0
07-Aug-19 15:11:41.763 - Loading FX3 configuration file C:\DirectOutput\FX3\ALL_PRE.FX3
07-Aug-19 15:11:41.773 - Loading FX3 configuration file C:\DirectOutput\FX3\BobsBurgersPinball.FX3
07-Aug-19 15:11:43.459 - Loading FX3 configuration file C:\DirectOutput\FX3\ALL_POST.FX3
07-Aug-19 15:11:43.466 - B2S file not found : BobsBurgersPinball
07-Aug-19 15:11:43.493 - Building restricted colour palette for game name = BobsBurgersPinball
07-Aug-19 15:11:43.500 - 5 colours added to the palette
07-Aug-19 15:11:43.507 - Cabinet Mode = 0   Backglass Mode = 0
07-Aug-19 15:11:49.015 - GAMEMODE mode=1 action #0 of 'FF_COLOUR,BLACK,RGB_DF,0'
07-Aug-19 15:11:49.026 - GAMEMODE mode=1 action #1 of 'FF_FLASHER,DV_FLOL,FL_FD,6,750,50,ORANGE'
07-Aug-19 15:11:49.035 - GAMEMODE mode=1 action #2 of 'FF_FLASHER,DV_FLOR,FL_FD,6,750,50,ORANGE'
07-Aug-19 15:11:49.043 - GAMEMODE mode=1 action #3 of 'FF_FLASHER,DV_FLIL,FL_FD,6,750,50,YELLOW'
07-Aug-19 15:11:49.051 - GAMEMODE mode=1 action #4 of 'FF_FLASHER,DV_FLIR,FL_FD,6,750,50,YELLOW'
07-Aug-19 15:11:49.059 - GAMEMODE mode=1 action #5 of 'FF_FLASHER,DV_FLCN,FL_FD,6,750,50,ORANGE'
07-Aug-19 15:11:49.066 - GAMEMODE mode=1 action #6 of 'FF_B2S,B2SSTARTANIMATION,SIGN'
07-Aug-19 15:11:49.099 - GAMEMODE mode=1 action #7 of 'FF_DOF,E424,-1'
07-Aug-19 15:15:03.497 - There are no OFF actions for GAMEMODE
07-Aug-19 15:15:20.390 - GAMEMODE mode=1 action #0 of 'FF_COLOUR,BLACK,RGB_DF,0'
07-Aug-19 15:15:20.398 - GAMEMODE mode=1 action #1 of 'FF_FLASHER,DV_FLOL,FL_FD,6,750,50,ORANGE'
07-Aug-19 15:15:20.406 - GAMEMODE mode=1 action #2 of 'FF_FLASHER,DV_FLOR,FL_FD,6,750,50,ORANGE'
07-Aug-19 15:15:20.414 - GAMEMODE mode=1 action #3 of 'FF_FLASHER,DV_FLIL,FL_FD,6,750,50,YELLOW'
07-Aug-19 15:15:20.423 - GAMEMODE mode=1 action #4 of 'FF_FLASHER,DV_FLIR,FL_FD,6,750,50,YELLOW'
07-Aug-19 15:15:20.431 - GAMEMODE mode=1 action #5 of 'FF_FLASHER,DV_FLCN,FL_FD,6,750,50,ORANGE'
07-Aug-19 15:15:20.439 - GAMEMODE mode=1 action #6 of 'FF_B2S,B2SSTARTANIMATION,SIGN'
07-Aug-19 15:15:20.448 - GAMEMODE mode=1 action #7 of 'FF_DOF,E424,-1'
07-Aug-19 15:17:13.594 - There are no OFF actions for GAMEMODE
07-Aug-19 15:17:34.380 - Activating process disappeared so stopping things
07-Aug-19 15:17:34.405 - 0 Pinscape device(s) found
07-Aug-19 15:17:34.413 - 0 LEDWiz device(s) found
07-Aug-19 15:17:34.423 - 0 FTDI (Sainsmart) device(s) found
07-Aug-19 15:17:34.431 - 0 PacLED64 device(s) found
07-Aug-19 15:17:34.438 - 0 Ultimate IO device(s) found
07-Aug-19 15:17:34.446 - !!! No valid output devices for DOFLinx were found ...... sorry about that !!!


Does Doflinx need to have a backglass?  Cuz I haven't put one yet?


Wait my backglasses are in the folder they are suppose to be in but they are not loading


Nevermind Outhere, That did it.  I had to get the backglass to work after I admin righted it <---not a grammer major, LOL.  Thanx for your help yet again



#12 Outhere

Outhere

    Pinball Wizard

  • Platinum Supporter
  • 4,807 posts

  • Flag: United States of America

  • Favorite Pinball: M M

Posted 07 August 2019 - 10:45 PM

Does Doflinx need to have a backglass? -- No

this time no Doflinx words came up... <--   Some times they do not

Running the back glass never worked right for me - I just run videos

Go to the DOF website and you can see which games have lights by looking up the table

Some games will have more lighting and others and some may have none



#13 Cadelle32

Cadelle32

    Hobbyist

  • Members
  • PipPip
  • 12 posts

  • Flag: United States of America

  • Favorite Pinball: Jack in the box

Posted 08 August 2019 - 08:36 PM

Yeah it's all working now.  I could have sworn I had put run as admin on the doflinx file but I guess I didnt



#14 Outhere

Outhere

    Pinball Wizard

  • Platinum Supporter
  • 4,807 posts

  • Flag: United States of America

  • Favorite Pinball: M M

Posted 08 August 2019 - 08:52 PM

The log you put in post 2 shows you have administrator rights - so somewhere along the line it got turn off



#15 Double D

Double D

    Hobbyist

  • Members
  • PipPip
  • 13 posts

  • Flag: United States of America

  • Favorite Pinball: Taxi

  • 360 Gamer Tag: Secondcitydude

Posted 19 August 2019 - 10:17 PM

I know this has been an issue in the past but Im stuck... DofLinx will not run with start up, I have tried everything, Admin on, shortcut paste... It works if I load the file manually by double clicking the doflinx.exe directly and then open a table.... windows 10.. any help?

#16 Outhere

Outhere

    Pinball Wizard

  • Platinum Supporter
  • 4,807 posts

  • Flag: United States of America

  • Favorite Pinball: M M

Posted 19 August 2019 - 11:19 PM

Try this

https://www.vpforums...=37382&p=373706



#17 Double D

Double D

    Hobbyist

  • Members
  • PipPip
  • 13 posts

  • Flag: United States of America

  • Favorite Pinball: Taxi

  • 360 Gamer Tag: Secondcitydude

Posted 19 August 2019 - 11:31 PM

Will do! Thanks for quick response.