24 replies to this topic

[smith482]

I have spent countless hours reading several forum posts and watching lots of how-to videos but I CANNOT get DOF running smoothly.

I have several issues so I’m not sure if each need their own forum post but here goes. I also included my GlobalConfig_B2SServer.xml & Cabinet.xml.

 

My current hardware setup is: 

1 LEDWiz – I have not wired this yet but I will once my other issues are fixed

1 USB Sainsmart (8 port)

1 USB Zebs Shaker Motor

1 Teensy 3.2 – I have not wired this yet but I will once my other issues are fixed

 

 Some of the major issues I have noticed:

 

1. Whenever I add the following line my Sainsmart no longer works in the DOF test table(or any other table):

<CabinetConfigFilePattern>C:\DirectOutput\config\Cabinet.xml</CabinetConfigFilePattern>

 

2. My current DOF config tool settings do not match the output ports on my Sainsmart. When I change my DOF config tool Sainsmart port settings those changes do not take effect after I download the new configs.

 

 

3.  My USB Zebs Shaker Motor does not work at all – it has 12V input, LED status light is lit, and the fuse is good.

 

 

GlobalConfig_B2SServer.xml

<?xml version="1.0" encoding="utf-8"?>
<GlobalConfig>
  <LedWizDefaultMinCommandIntervalMs>1</LedWizDefaultMinCommandIntervalMs>
  <LedControlMinimumEffectDurationMs>60</LedControlMinimumEffectDurationMs>
  <LedControlMinimumRGBEffectDurationMs>120</LedControlMinimumRGBEffectDurationMs>
  <IniFilesPath />
   <ShapeDefintionFilePattern>C:\DirectOutput\Config\DirectOutputShapes.xml</ShapeDefintionFilePattern>
  <TableConfigFilePatterns />
  <LedControlIniFiles>

<LedControlIniFile>
      <Filename>C:\DirectOutput\config\directoutputconfig.ini</Filename>
      <LedWizNumber>1</LedWizNumber>
    </LedControlIniFile>

<LedControlIniFile>
      <Filename>C:\DirectOutput\config\directoutputconfig30.ini</Filename>
      <LedWizNumber>30</LedWizNumber>
    </LedControlIniFile>
    
<LedControlIniFile>
      <Filename>C:\DirectOutput\config\directoutputconfig40.ini</Filename>
      <LedWizNumber>40</LedWizNumber>
    </LedControlIniFile>
    
<LedControlIniFile>
      <Filename>C:\DirectOutput\config\directoutputconfig41.ini</Filename>
      <LedWizNumber>41</LedWizNumber>
    </LedControlIniFile>

   </LedControlIniFiles>
  <EnableLogging>true</EnableLogging>
  <ClearLogOnSessionStart>true</ClearLogOnSessionStart>
  <LogFilePattern>.\DirectOutput.log</LogFilePattern>
</GlobalConfig>

Cabinet.xml

<Cabinet xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<Name>My Pin Cab</Name>

<OutputControllers>
<FT245RBitbangController>
<Name>Sainsmart 1</Name>
<SerialNumber>A906M30B</SerialNumber>
</FT245RBitbangController>
</OutputControllers>


<Toys>
  <LedWizEquivalent>
  <Name>SainsmartLWEQ 1</Name>
  <LedWizNumber>40</LedWizNumber>
  <Outputs>
    <LedWizEquivalentOutput>
      <OutputName>Sainsmart 1.01</OutputName>
      <LedWizEquivalentOutputNumber>1</LedWizEquivalentOutputNumber>
    </LedWizEquivalentOutput>
    <LedWizEquivalentOutput>
      <OutputName>Sainsmart 1.02</OutputName>
      <LedWizEquivalentOutputNumber>2</LedWizEquivalentOutputNumber>
    </LedWizEquivalentOutput>
    <LedWizEquivalentOutput>
      <OutputName>Sainsmart 1.03</OutputName>
      <LedWizEquivalentOutputNumber>3</LedWizEquivalentOutputNumber>
    </LedWizEquivalentOutput>
    <LedWizEquivalentOutput>
      <OutputName>Sainsmart 1.04</OutputName>
      <LedWizEquivalentOutputNumber>4</LedWizEquivalentOutputNumber>
    </LedWizEquivalentOutput>
    <LedWizEquivalentOutput>
      <OutputName>Sainsmart 1.05</OutputName>
      <LedWizEquivalentOutputNumber>5</LedWizEquivalentOutputNumber>
    </LedWizEquivalentOutput>
    <LedWizEquivalentOutput>
      <OutputName>Sainsmart 1.06</OutputName>
      <LedWizEquivalentOutputNumber>6</LedWizEquivalentOutputNumber>
    </LedWizEquivalentOutput>
    <LedWizEquivalentOutput>
      <OutputName>Sainsmart 1.07</OutputName>
      <LedWizEquivalentOutputNumber>7</LedWizEquivalentOutputNumber>
    </LedWizEquivalentOutput>
    <LedWizEquivalentOutput>
      <OutputName>Sainsmart 1.08</OutputName>
      <LedWizEquivalentOutputNumber>8</LedWizEquivalentOutputNumber>
    </LedWizEquivalentOutput>
  </Outputs>
  </LedWizEquivalent>
</Toys>

 

 

<OutputControllers>
    <FT245RBitbangController>
    <Name>Zebsboards 1</Name>
    <SerialNumber>ZBSHAKER</SerialNumber>
    </FT245RBitbangController>
</OutputControllers>
<Toys>
    <LedWizEquivalent>
    <Name>ZebsboardsLWEQ 1</Name>
    <LedWizNumber>41</LedWizNumber>
    <Outputs>
        <LedWizEquivalentOutput>
          <OutputName>Zebsboards 1.01</OutputName>
          <LedWizEquivalentOutputNumber>1</LedWizEquivalentOutputNumber>
        </LedWizEquivalentOutput>
  <LedWizEquivalentOutput>
          <OutputName>Zebsboards 1.02</OutputName>
          <LedWizEquivalentOutputNumber>2</LedWizEquivalentOutputNumber>
        </LedWizEquivalentOutput>
 <LedWizEquivalentOutput>
          <OutputName>Zebsboards 1.03</OutputName>
          <LedWizEquivalentOutputNumber>3</LedWizEquivalentOutputNumber>
        </LedWizEquivalentOutput>
 <LedWizEquivalentOutput>
          <OutputName>Zebsboards 1.04</OutputName>
          <LedWizEquivalentOutputNumber>4</LedWizEquivalentOutputNumber>
        </LedWizEquivalentOutput>
  <LedWizEquivalentOutput>
          <OutputName>Zebsboards 1.05</OutputName>
          <LedWizEquivalentOutputNumber>5</LedWizEquivalentOutputNumber>
        </LedWizEquivalentOutput>
  <LedWizEquivalentOutput>
          <OutputName>Zebsboards 1.06</OutputName>
<LedWizEquivalentOutputNumber>6</LedWizEquivalentOutputNumber>
        </LedWizEquivalentOutput>
 <LedWizEquivalentOutput>
          <OutputName>Zebsboards 1.07</OutputName>
          <LedWizEquivalentOutputNumber>7</LedWizEquivalentOutputNumber>
        </LedWizEquivalentOutput>
      <LedWizEquivalentOutput>
          <OutputName>Zebsboards 1.08</OutputName>
          <LedWizEquivalentOutputNumber>8</LedWizEquivalentOutputNumber>
        </LedWizEquivalentOutput>
      </Outputs>
    </LedWizEquivalent>

</Toys>

 <OutputControllers>
    <TeensyStripController>
     <Name>LEDStripController</Name>
      <NumberOfLedsStrip1>129</NumberOfLedsStrip1>
      <NumberOfLedsStrip2>129</NumberOfLedsStrip2>
      <NumberOfLedsStrip3>384</NumberOfLedsStrip3>
      <NumberOfLedsStrip4>0</NumberOfLedsStrip4>
      <NumberOfLedsStrip5>0</NumberOfLedsStrip5>
      <NumberOfLedsStrip6>0</NumberOfLedsStrip6>
      <NumberOfLedsStrip7>0</NumberOfLedsStrip7>
      <NumberOfLedsStrip8>0</NumberOfLedsStrip8>
      <ComPortName>COM4</ComPortName>
    </TeensyStripController>
</OutputControllers>

<Toys>
    <LedStrip>
      <Name>PF Right</Name>
      <Width>1</Width>
      <Height>129</Height>
      <LedStripArrangement>BottomUpLeftRight</LedStripArrangement>
      <ColorOrder>GRB</ColorOrder>
      <FirstLedNumber>1</FirstLedNumber>
      <FadingCurveName>SwissLizardsLedCurve</FadingCurveName>
      <OutputControllerName>LEDStripController</OutputControllerName>
    </LedStrip>
   
   
    <LedStrip>
      <Name>PF Left</Name>
      <Width>1</Width>
      <Height>129</Height>
      <LedStripArrangement>BottomUpLeftRight</LedStripArrangement>
      <ColorOrder>GRB</ColorOrder>
      <FirstLedNumber>130</FirstLedNumber>
      <FadingCurveName>SwissLizardsLedCurve</FadingCurveName>
      <OutputControllerName>LEDStripController</OutputControllerName>
    </LedStrip>


   <LedStrip>
      <Name>PF Back</Name>
      <Width>48</Width>
      <Height>8</Height>
      <LedStripArrangement>BottomUpAlternateRightLeft</LedStripArrangement>
      <ColorOrder>GRB</ColorOrder>
      <FirstLedNumber>259</FirstLedNumber>
      <FadingCurveName>SwissLizardsLedCurve</FadingCurveName>
      <OutputControllerName>LEDStripController</OutputControllerName>
    </LedStrip>



   <LedWizEquivalent>
   <Name>LedWizEquivalent 30</Name>
    <Outputs>
    <LedWizEquivalentOutput>
     <OutputName>PF Back</OutputName>
     <LedWizEquivalentOutputNumber>7</LedWizEquivalentOutputNumber>
    </LedWizEquivalentOutput>    
    <LedWizEquivalentOutput>
     <OutputName>PF Left</OutputName>
     <LedWizEquivalentOutputNumber>4</LedWizEquivalentOutputNumber>
    </LedWizEquivalentOutput>
    <LedWizEquivalentOutput>
     <OutputName>PF Right</OutputName>
     <LedWizEquivalentOutputNumber>1</LedWizEquivalentOutputNumber>
    </LedWizEquivalentOutput>
   </Outputs>
   <LedWizNumber>30</LedWizNumber>
   </LedWizEquivalent>
   </Toys>
<Colors>
</Colors>

<Curves>
</Curves>
<AutoConfigEnabled>true</AutoConfigEnabled>
</Cabinet>

Edited by smith482, 17 June 2019 - 11:54 PM.

[Outhere]

With this DOF - The only thing you need the Cabinet.xml file for Teensy

http://mjrnet.org/pi...ll-updates.html

 

Try this GlobalConfig_B2SServer.xml

<?xml version="1.0" encoding="utf-8"?>
<!--Global configuration for the DirectOutput framework.-->
<!--Saved by DirectOutput Version 0.8.6002.28451: 2016-09-25 10-00-34-->
<GlobalConfig>
  <LedWizDefaultMinCommandIntervalMs>1</LedWizDefaultMinCommandIntervalMs>
  <LedControlMinimumEffectDurationMs>60</LedControlMinimumEffectDurationMs>
  <LedControlMinimumRGBEffectDurationMs>120</LedControlMinimumRGBEffectDurationMs>
  <IniFilesPath />
  <ShapeDefintionFilePattern>C:\DirectOutput\config\DirectOutputShapes.xml</ShapeDefintionFilePattern>
  <CabinetConfigFilePattern>C:\DirectOutput\config\Cabinet.xml</CabinetConfigFilePattern>
  <TableConfigFilePatterns />
  <EnableLogging>true</EnableLogging>
  <ClearLogOnSessionStart>true</ClearLogOnSessionStart>
  <LogFilePattern>C:\DirectOutput\DirectOutput.log</LogFilePattern>
</GlobalConfig>

The same site where you get the DOF from - download this file and unzip it put the folder (LWCloneU2) in your DirectOutput folder this has a great test Program in it

Download LEDWIZ.DLL replacement

[smith482]

I have gone through the MJR guide a few times and done all of the things it said but it doesnt mention anything about Zebs shaker. Zebs instructions are fairly clear but i could never get it to work, it doesn't consider that the user might have another Sainsmart.

[Outhere]

Did you get anything working?

 

My mistake I know nothing about Zebs Shaker Motor but I know for a fact the Sainsmart (8 port) does not have to go in the Cabinet.xml file..

That being said I just read the instructions and it says you should not need a Cabinet.xml file..

I'm assuming you have it all set up correctly on the DOF website...

Have you tried the shaker motor all by itself Without The Sainsmart configured in and no Cabinet.xml file?

Edited by Outhere, 12 June 2019 - 03:02 PM.

[DJRobX]

You are missing the most the important thing - the directoutput.log!   That will tell us a whole lot about what is going on.   

[Outhere]

You are missing the most the important thing - the directoutput.log!   That will tell us a whole lot about what is going on.   

Yes that's what I forgot to ask - Post directoutput.log

[smith482]

I tried outheres b2s.xml file and nothing worked out of my shaker. The sainsmart worked but the port assignments are all incorrect despite being laid out correctly on the DOFConfig tool. I also fixed the wrong serial number in my original post. 

 

DirectOutput Version 3.1.7011.27968, built 2019.03.13 15:32
MJR Grander Unified DOF R3++ edition feat. Djrobx, Rambo3, and Freezy
DOF created by SwissLizard | https://github.com/mjrgh/DirectOutput
2019.06.15 07:39:12.407	DirectOutput Logger initialized
2019.06.15 07:39:12.373	Global config filename is "C:\DIRECTOUTPUT\config\GlobalConfig_B2SServer.xml"
2019.06.15 07:39:12.408	Global config loaded from: C:\DIRECTOUTPUT\config\GlobalConfig_B2SServer.xml
2019.06.15 07:39:12.408	Loading Pinball parts
2019.06.15 07:39:12.408	Loading cabinet
2019.06.15 07:39:12.409	Will load cabinet config file: C:\DirectOutput\Config\Cabinet.xml
2019.06.15 07:39:12.462	1 output controller defnitions and 1 toy definitions loaded from cabinet config.
2019.06.15 07:39:12.462	Cabinet config file has AutoConfig feature enabled. Calling AutoConfig.
2019.06.15 07:39:12.463	Cabinet auto configuration started
2019.06.15 07:39:12.475	PhilipsHueAutoConfigurator.AutoConfig started...note, actual connection detection will happen asynchronously, and device disabled if not succesfull (check further down in the log)
2019.06.15 07:39:12.869	FT245RBitbangControllerAutoConfigurator.AutoConfig.. Detected FT245RBitbangController[0], name=FT245RBitbangController 0, description: FT245R USB FIFO, serial #A906M30B
2019.06.15 07:39:12.869	Detected and added FT245RBitbangController Id 0 with name FT245RBitbangController 0
2019.06.15 07:39:12.870	FT245RBitbangControllerAutoConfigurator.AutoConfig.. Detected FT245RBitbangController[1], name=FT245RBitbangController 1, description: ZB Shaker Motor, serial #SM9EF
2019.06.15 07:39:12.870	Detected and added FT245RBitbangController Id 1 with name FT245RBitbangController 1
2019.06.15 07:39:12.870	Added LedwizEquivalent Nr. 41 with name FT245RBitbangController 1 Equivalent 1 for PacUIO with Id 1
2019.06.15 07:39:12.870	Cabinet auto configuration finished
2019.06.15 07:39:12.870	Autoconfig complete.
2019.06.15 07:39:12.870	Cabinet config loaded successfully from C:\DirectOutput\Config\Cabinet.xml
2019.06.15 07:39:12.870	Cabinet loaded
2019.06.15 07:39:12.870	Loading table config
2019.06.15 07:39:12.871	Warning: No table config file found. Will try to load config from LedControl file(s).
2019.06.15 07:39:12.872	Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName dof_test
2019.06.15 07:39:12.881	Loading LedControl file C:\Visual Pinball\Tables\directoutputconfig.ini
2019.06.15 07:39:12.892	Min DOF Version is 0.8 for file directoutputconfig.ini
2019.06.15 07:39:13.329	Loading LedControl file C:\Visual Pinball\Tables\directoutputconfig40.ini
2019.06.15 07:39:13.330	Min DOF Version is 0.8 for file directoutputconfig40.ini
2019.06.15 07:39:13.506	2 directoutputconfig.ini or ledcontrol.ini files loaded.
2019.06.15 07:39:13.507	Config for RomName dof_test exists in LedControl data. Updating cabinet and config.
2019.06.15 07:39:13.524	Table config loading finished: romname=dof_test, tablename=dof_test_table_VPX
2019.06.15 07:39:13.525	Pinball parts loaded
2019.06.15 07:39:13.526	Starting processes
2019.06.15 07:39:13.526	Initializing cabinet
2019.06.15 07:39:13.526	Debug: Initializing output controllers
2019.06.15 07:39:13.528	FT245RBitbangController Sainsmart 1 with serial number A906M30B has been initialized and the updater thread has been started.
2019.06.15 07:39:13.528	FT245RBitbangController FT245RBitbangController 0 with serial number A906M30B has been initialized and the updater thread has been started.
2019.06.15 07:39:13.529	FT245RBitbangController FT245RBitbangController 1 with serial number SM9EF has been initialized and the updater thread has been started.
2019.06.15 07:39:13.529	Debug: Output controllers initialized
2019.06.15 07:39:13.532	Cabinet initialized
2019.06.15 07:39:13.533	Loading shape definition file: C:\DirectOutput\Config\DirectOutputShapes.xml
2019.06.15 07:39:13.550	Connection to FTDI chip A906M30B established.
2019.06.15 07:39:13.560	EXCEPTION: Could not open the connection to FTDI chip with serial number A906M30B.
2019.06.15 07:39:13.561	EXCEPTION: Thread: FT245RBitbangController A906M30B named FT245RBitbangController 0 updater thread 
2019.06.15 07:39:13.561	EXCEPTION: Message: FT_EXCEPTION --> FTDI device not opened.
2019.06.15 07:39:13.563	EXCEPTION: Stacktrace:    at DirectOutput.Cab.Out.FTDIChip.FTDI.ErrorHandler(FT_STATUS ftStatus, FT_ERROR ftErrorCondition)
2019.06.15 07:39:13.563	EXCEPTION: Stacktrace:    at DirectOutput.Cab.Out.FTDIChip.FTDI.ErrorHandler(FT_STATUS ftStatus)
2019.06.15 07:39:13.563	EXCEPTION: Stacktrace:    at DirectOutput.Cab.Out.FTDIChip.FT245RBitbangController.Connect()
2019.06.15 07:39:13.564	EXCEPTION: Targetsite: Void ErrorHandler(FT_STATUS, FT_ERROR)
2019.06.15 07:39:13.564	Warning: No connection to FTDI chip A906M30B. Updater thread will terminate.
2019.06.15 07:39:13.566	Connection to FTDI chip SM9EF established.
2019.06.15 07:39:13.598	Framework initialized.
2019.06.15 07:39:13.598	Have fun! :)
2019.06.15 07:39:25.986	Finishing framework
2019.06.15 07:39:25.989	Finishing cabinet
2019.06.15 07:39:25.990	Debug: Finishing output controllers
2019.06.15 07:39:26.058	Connection to FTDI chip A906M30B closed.
2019.06.15 07:39:26.058	FT245RBitbangController Sainsmart 1 with serial number A906M30B has been finished and the updater thread has been terminated.
2019.06.15 07:39:26.059	FT245RBitbangController FT245RBitbangController 0 with serial number A906M30B has been finished and the updater thread has been terminated.
2019.06.15 07:39:26.134	Connection to FTDI chip SM9EF closed.
2019.06.15 07:39:26.134	FT245RBitbangController FT245RBitbangController 1 with serial number SM9EF has been finished and the updater thread has been terminated.
2019.06.15 07:39:26.134	Debug: Output controllers finished
2019.06.15 07:39:26.134	Cabinet finished
2019.06.15 07:39:26.134	DirectOutput framework finished.
2019.06.15 07:39:26.134	Bye and thanks for using!

Edited by smith482, 15 June 2019 - 11:44 AM.

[zebulon]

Not sure about the Sainsmart board but your problem with the shaker is that the serial number is wrong in your cabinet.xml file

 

According to the logfile, Autoconfig is finding name=FT245RBitbangController 1, description: ZB Shaker Motor, serial #SM9EF   and it's loading properly

 

in your cabinet.xml you have ... <SerialNumber>ZBSHAKER</SerialNumber>

 

You don't need a cabinet.xml with the version of DOF that you are using. Change the name to cabinet.bk and try running without it.

[smith482]

I still get nothing from the shaker. I have the adjustment knob  on the board halfway. With the cabinet.xml removed this is my log file. I suspect i will need a cabinet.xml at some point if i want to use my teensy.

DirectOutput Version 3.1.7011.27968, built 2019.03.13 15:32
MJR Grander Unified DOF R3++ edition feat. Djrobx, Rambo3, and Freezy
DOF created by SwissLizard | https://github.com/mjrgh/DirectOutput
2019.06.15 15:10:39.159	DirectOutput Logger initialized
2019.06.15 15:10:39.132	Global config filename is "C:\DIRECTOUTPUT\config\GlobalConfig_B2SServer.xml"
2019.06.15 15:10:39.159	Global config loaded from: C:\DIRECTOUTPUT\config\GlobalConfig_B2SServer.xml
2019.06.15 15:10:39.159	Loading Pinball parts
2019.06.15 15:10:39.159	Loading cabinet
2019.06.15 15:10:39.160	No cabinet config file loaded. Will use AutoConfig.
2019.06.15 15:10:39.160	Cabinet auto configuration started
2019.06.15 15:10:39.209	PhilipsHueAutoConfigurator.AutoConfig started...note, actual connection detection will happen asynchronously, and device disabled if not succesfull (check further down in the log)
2019.06.15 15:10:39.563	FT245RBitbangControllerAutoConfigurator.AutoConfig.. Detected FT245RBitbangController[0], name=FT245RBitbangController 0, description: FT245R USB FIFO, serial #A906M30B
2019.06.15 15:10:39.564	Detected and added FT245RBitbangController Id 0 with name FT245RBitbangController 0
2019.06.15 15:10:39.565	Added LedwizEquivalent Nr. 40 with name FT245RBitbangController 0 Equivalent 1 for PacUIO with Id 0
2019.06.15 15:10:39.565	FT245RBitbangControllerAutoConfigurator.AutoConfig.. Detected FT245RBitbangController[1], name=FT245RBitbangController 1, description: ZB Shaker Motor, serial #SM9EF
2019.06.15 15:10:39.565	Detected and added FT245RBitbangController Id 1 with name FT245RBitbangController 1
2019.06.15 15:10:39.566	Added LedwizEquivalent Nr. 41 with name FT245RBitbangController 1 Equivalent 1 for PacUIO with Id 1
2019.06.15 15:10:39.566	Cabinet auto configuration finished
2019.06.15 15:10:39.566	Cabinet loaded
2019.06.15 15:10:39.566	Loading table config
2019.06.15 15:10:39.567	Warning: No table config file found. Will try to load config from LedControl file(s).
2019.06.15 15:10:39.567	Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName dof_test
2019.06.15 15:10:39.571	Loading LedControl file C:\Visual Pinball\Tables\directoutputconfig.ini
2019.06.15 15:10:39.582	Min DOF Version is 0.8 for file directoutputconfig.ini
2019.06.15 15:10:40.015	Loading LedControl file C:\Visual Pinball\Tables\directoutputconfig40.ini
2019.06.15 15:10:40.021	Min DOF Version is 0.8 for file directoutputconfig40.ini
2019.06.15 15:10:40.205	2 directoutputconfig.ini or ledcontrol.ini files loaded.
2019.06.15 15:10:40.207	Config for RomName dof_test exists in LedControl data. Updating cabinet and config.
2019.06.15 15:10:40.224	Table config loading finished: romname=dof_test, tablename=dof_test_table_VPX
2019.06.15 15:10:40.225	Pinball parts loaded
2019.06.15 15:10:40.225	Starting processes
2019.06.15 15:10:40.226	Initializing cabinet
2019.06.15 15:10:40.226	Debug: Initializing output controllers
2019.06.15 15:10:40.227	FT245RBitbangController FT245RBitbangController 0 with serial number A906M30B has been initialized and the updater thread has been started.
2019.06.15 15:10:40.228	FT245RBitbangController FT245RBitbangController 1 with serial number SM9EF has been initialized and the updater thread has been started.
2019.06.15 15:10:40.228	Debug: Output controllers initialized
2019.06.15 15:10:40.231	Cabinet initialized
2019.06.15 15:10:40.232	Loading shape definition file: C:\DirectOutput\Config\DirectOutputShapes.xml
2019.06.15 15:10:40.254	Connection to FTDI chip A906M30B established.
2019.06.15 15:10:40.258	Connection to FTDI chip SM9EF established.
2019.06.15 15:10:40.272	Framework initialized.
2019.06.15 15:10:40.272	Have fun! :)
2019.06.15 15:11:48.178	Finishing framework
2019.06.15 15:11:48.181	Finishing cabinet
2019.06.15 15:11:48.182	Debug: Finishing output controllers
2019.06.15 15:11:48.257	Connection to FTDI chip A906M30B closed.
2019.06.15 15:11:48.257	FT245RBitbangController FT245RBitbangController 0 with serial number A906M30B has been finished and the updater thread has been terminated.
2019.06.15 15:11:48.331	Connection to FTDI chip SM9EF closed.
2019.06.15 15:11:48.331	FT245RBitbangController FT245RBitbangController 1 with serial number SM9EF has been finished and the updater thread has been terminated.
2019.06.15 15:11:48.331	Debug: Output controllers finished
2019.06.15 15:11:48.331	Cabinet finished
2019.06.15 15:11:48.331	DirectOutput framework finished.
2019.06.15 15:11:48.331	Bye and thanks for using!
2019.06.15 15:13:43.894	Global config filename is "C:\DIRECTOUTPUT\config\GlobalConfig_B2SServer.xml"
2019.06.15 15:13:43.904	Global config loaded from: C:\DIRECTOUTPUT\config\GlobalConfig_B2SServer.xml
2019.06.15 15:13:43.904	Loading Pinball parts
2019.06.15 15:13:43.904	Loading cabinet
2019.06.15 15:13:43.904	No cabinet config file loaded. Will use AutoConfig.
2019.06.15 15:13:43.904	Cabinet auto configuration started
2019.06.15 15:13:43.908	PhilipsHueAutoConfigurator.AutoConfig started...note, actual connection detection will happen asynchronously, and device disabled if not succesfull (check further down in the log)
2019.06.15 15:13:44.272	FT245RBitbangControllerAutoConfigurator.AutoConfig.. Detected FT245RBitbangController[0], name=FT245RBitbangController 0, description: FT245R USB FIFO, serial #A906M30B
2019.06.15 15:13:44.272	Detected and added FT245RBitbangController Id 0 with name FT245RBitbangController 0
2019.06.15 15:13:44.272	Added LedwizEquivalent Nr. 40 with name FT245RBitbangController 0 Equivalent 1 for PacUIO with Id 0
2019.06.15 15:13:44.272	FT245RBitbangControllerAutoConfigurator.AutoConfig.. Detected FT245RBitbangController[1], name=FT245RBitbangController 1, description: ZB Shaker Motor, serial #SM9EF
2019.06.15 15:13:44.272	Detected and added FT245RBitbangController Id 1 with name FT245RBitbangController 1
2019.06.15 15:13:44.273	Added LedwizEquivalent Nr. 41 with name FT245RBitbangController 1 Equivalent 1 for PacUIO with Id 1
2019.06.15 15:13:44.273	Cabinet auto configuration finished
2019.06.15 15:13:44.273	Cabinet loaded
2019.06.15 15:13:44.273	Loading table config
2019.06.15 15:13:44.273	Warning: No table config file found. Will try to load config from LedControl file(s).
2019.06.15 15:13:44.273	Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName dof_test
2019.06.15 15:13:44.279	Loading LedControl file C:\Visual Pinball\Tables\directoutputconfig.ini
2019.06.15 15:13:44.287	Min DOF Version is 0.8 for file directoutputconfig.ini
2019.06.15 15:13:44.696	Loading LedControl file C:\Visual Pinball\Tables\directoutputconfig40.ini
2019.06.15 15:13:44.698	Min DOF Version is 0.8 for file directoutputconfig40.ini
2019.06.15 15:13:44.872	2 directoutputconfig.ini or ledcontrol.ini files loaded.
2019.06.15 15:13:44.872	Config for RomName dof_test exists in LedControl data. Updating cabinet and config.
2019.06.15 15:13:44.873	Table config loading finished: romname=dof_test, tablename=dof_test_table_VPX
2019.06.15 15:13:44.873	Pinball parts loaded
2019.06.15 15:13:44.873	Starting processes
2019.06.15 15:13:44.873	Initializing cabinet
2019.06.15 15:13:44.873	Debug: Initializing output controllers
2019.06.15 15:13:44.873	FT245RBitbangController FT245RBitbangController 0 with serial number A906M30B has been initialized and the updater thread has been started.
2019.06.15 15:13:44.874	FT245RBitbangController FT245RBitbangController 1 with serial number SM9EF has been initialized and the updater thread has been started.
2019.06.15 15:13:44.874	Debug: Output controllers initialized
2019.06.15 15:13:44.874	Cabinet initialized
2019.06.15 15:13:44.874	Loading shape definition file: C:\DirectOutput\Config\DirectOutputShapes.xml
2019.06.15 15:13:44.882	Framework initialized.
2019.06.15 15:13:44.882	Have fun! :)
2019.06.15 15:13:44.890	Connection to FTDI chip A906M30B established.
2019.06.15 15:13:44.904	Connection to FTDI chip SM9EF established.
2019.06.15 15:14:13.682	Finishing framework
2019.06.15 15:14:13.682	Finishing cabinet
2019.06.15 15:14:13.682	Debug: Finishing output controllers
2019.06.15 15:14:13.763	Connection to FTDI chip A906M30B closed.
2019.06.15 15:14:13.763	FT245RBitbangController FT245RBitbangController 0 with serial number A906M30B has been finished and the updater thread has been terminated.
2019.06.15 15:14:13.838	Connection to FTDI chip SM9EF closed.
2019.06.15 15:14:13.838	FT245RBitbangController FT245RBitbangController 1 with serial number SM9EF has been finished and the updater thread has been terminated.
2019.06.15 15:14:13.838	Debug: Output controllers finished
2019.06.15 15:14:13.838	Cabinet finished
2019.06.15 15:14:13.839	DirectOutput framework finished.
2019.06.15 15:14:13.839	Bye and thanks for using!

[zebulon]

You need to do a configuration file for it in DOFconfigTool, you're only loading for the other devices

 

2019.06.15 15:10:39.565    FT245RBitbangControllerAutoConfigurator.AutoConfig.. Detected FT245RBitbangController[1], name=FT245RBitbangController 1, description: ZB Shaker Motor, serial #SM9EF
2019.06.15 15:10:39.565    Detected and added FT245RBitbangController Id 1 with name FT245RBitbangController 1
2019.06.15 15:10:39.566    Added LedwizEquivalent Nr. 41 with name FT245RBitbangController 1 Equivalent 1 for PacUIO with Id 1

 

 

2019.06.15 15:10:39.571    Loading LedControl file C:\Visual Pinball\Tables\directoutputconfig.ini
2019.06.15 15:10:39.582    Min DOF Version is 0.8 for file directoutputconfig.ini
2019.06.15 15:10:40.015    Loading LedControl file C:\Visual Pinball\Tables\directoutputconfig40.ini
2019.06.15 15:10:40.021    Min DOF Version is 0.8 for file directoutputconfig40.ini
2019.06.15 15:10:40.205    2 directoutputconfig.ini or ledcontrol.ini files loaded.

 

You need a directoutputconfig41.ini for the shaker board

[smith482]

I already have the 41.ini not sure why its not loading. how do i add pictures to my post?

Edited by smith482, 17 June 2019 - 12:45 AM.

[Outhere]

The bottom right click more reply options Then click browse at the Bottom, then click attach file

[smith482]

Also looking at my posted log.. why is DOF loading ini files from my tables folder and not directoutput\config? i think thats part of the problem

 

Here is my current config folder with inis and xmls

https://photos.app.goo.gl/CTfHW2eHRJwJRMGBA

Edited by smith482, 17 June 2019 - 03:29 AM.

[Outhere]

That is a good question

Go to and C:\DIRECTOUTPUT  double click and RegisterDirectOutputComObject

And see if that fixes that

I have 2 LEDwiz's and one teensy

This is my Log

https://www.vpforums...=42327&p=429449

[zebulon]

Delete or move the ones in the tables folder away from there.  Looks like an instance of double installation of DOF.

[smith482]

I did a ton of forum reading and also implemented your suggestions and found some success. I backed up my DOF folder and installed a fresh copy, removed the 2 ini files in my tables folder (Thanks ZEB!) I used an exact copy of Outthere's cabinet and b2s config.xmls and the first sainsmart works perfect. However the shaker does not respond in the DOF test table (by pressing 'S'). I have my teensy plugged in but not wired yet and  the LEDWiz is not plugged in. I am guessing that the following errors are due to the unplugged LEDWiz? Here is my DOF log:   Oh BTW thanks for everyone's time and help so far

2019.06.17 19:35:07.141	Global config filename is "C:\DIRECTOUTPUT\config\GlobalConfig_B2SServer.xml"
2019.06.17 19:35:07.146	Global config loaded from: C:\DIRECTOUTPUT\config\GlobalConfig_B2SServer.xml
2019.06.17 19:35:07.146	Loading Pinball parts
2019.06.17 19:35:07.146	Loading cabinet
2019.06.17 19:35:07.146	Will load cabinet config file: C:\DirectOutput\Config\Cabinet.xml
2019.06.17 19:35:07.469	1 output controller defnitions and 4 toy definitions loaded from cabinet config.
2019.06.17 19:35:07.469	Cabinet config file has AutoConfig feature enabled. Calling AutoConfig.
2019.06.17 19:35:07.469	Cabinet auto configuration started
2019.06.17 19:35:07.477	PhilipsHueAutoConfigurator.AutoConfig started...note, actual connection detection will happen asynchronously, and device disabled if not succesfull (check further down in the log)
2019.06.17 19:35:07.823	FT245RBitbangControllerAutoConfigurator.AutoConfig.. Detected FT245RBitbangController[0], name=FT245RBitbangController 0, description: FT245R USB FIFO, serial #A906M30B
2019.06.17 19:35:07.823	Detected and added FT245RBitbangController Id 0 with name FT245RBitbangController 0
2019.06.17 19:35:07.823	Added LedwizEquivalent Nr. 40 with name FT245RBitbangController 0 Equivalent 1 for PacUIO with Id 0
2019.06.17 19:35:07.823	FT245RBitbangControllerAutoConfigurator.AutoConfig.. Detected FT245RBitbangController[1], name=FT245RBitbangController 1, description: ZB Shaker Motor, serial #SM9EF
2019.06.17 19:35:07.823	Detected and added FT245RBitbangController Id 1 with name FT245RBitbangController 1
2019.06.17 19:35:07.824	Added LedwizEquivalent Nr. 41 with name FT245RBitbangController 1 Equivalent 1 for PacUIO with Id 1
2019.06.17 19:35:07.824	Cabinet auto configuration finished
2019.06.17 19:35:07.824	Autoconfig complete.
2019.06.17 19:35:07.824	Cabinet config loaded successfully from C:\DirectOutput\Config\Cabinet.xml
2019.06.17 19:35:07.824	Cabinet loaded
2019.06.17 19:35:07.824	Loading table config
2019.06.17 19:35:07.824	Warning: No table config file found. Will try to load config from LedControl file(s).
2019.06.17 19:35:07.824	Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName dof_test
2019.06.17 19:35:07.830	Loading LedControl file C:\DIRECTOUTPUT\config\directoutputconfig.ini
2019.06.17 19:35:07.836	Min DOF Version is 0.8 for file directoutputconfig.ini
2019.06.17 19:35:08.271	Loading LedControl file C:\DIRECTOUTPUT\config\directoutputconfig30.ini
2019.06.17 19:35:08.282	Min DOF Version is 0.8 for file directoutputconfig30.ini
2019.06.17 19:35:09.051	Failed: FD800
2019.06.17 19:35:09.051	Warning: Cant parse the trigger part FD800 of the ledcontrol table config setting  fd800 AH100 AL40 AT0 AW19 SHPCircle3 L13.
2019.06.17 19:35:09.051	EXCEPTION: Could not parse setting  fd800 AH100 AL40 AT0 AW19 SHPCircle3 L13 in column data S18 Red AH100 AL0 AT0 AW19 SHPCircle3 L5/S27 White AH100 AL0 AT0 AW19 SHPCircle3 L6/S29 Red AH100 AL0 AT0 AW19 SHPCircle3 L7/S16 White AH100 AL0 AT0 AW19 SHPCircle3 L8/S30 Yellow AH100 AL20 AT0 AW19 SHPCircle3 L9/S31 White AH100 AL20 AT0 AW19 SHPCircle3 L10/W17 White f200 AH100 AL20 AT0 AW19 SHPCircle3 L11/S1 Red AH100 AL40 AT0 AW19 SHPCircle3 L12/ fd800 AH100 AL40 AT0 AW19 SHPCircle3 L13/S11 Red AH100 AL40 AT0 AW19 SHPCircle3 L14/S25 White AH100 AL40 AT0 AW19 SHPCircle3 L15/W18 Yellow f200 AH100 AL40 AT0 AW19 SHPCircle3 L16/S28 White AH100 AL60 AT0 AW19 SHPCircle3 L17/S30 Yellow AH100 AL60 AT0 AW19 SHPCircle3 L18/S32 White AH100 AL60 AT0 AW19 SHPCircle3 L19/W19 White f200 AH100 AL60 AT0 AW19 SHPCircle3 L20/S16 White AH100 AL80 AT0 AW19 SHPCircle3 L21/S20 Red AH100 AL80 AT0 AW19 SHPCircle3 L22/S26 Yellow AH100 AL80 AT0 AW19 SHPCircle3 L23/S5 White AH30 AL0 AT0 AW9 SHPCircle3 300 L0/S5 White AH30 AL91 AT0 AW9 SHPCircle3 300 L0/S7 White AH30 AL0 AT0 AW9 SHPCircle3 300 L1/S7 White AH30 AL91 AT0 AW9 SHPCircle3 300 L1/S14 White AH30 AL0 AT0 AW9 SHPCircle3 300 L2/S14 White AH30 AL91 AT0 AW9 SHPCircle3 300 L2/W25 White AH30 AL0 AT0 AW9 SHPCircle3 500 10 L3/W25 White AH30 AL91 AT0 AW9 SHPCircle3 500 10 L3/W41 White AH30 AL0 AT0 AW9 SHPCircle3 500 10 L4/W41 White AH30 AL91 AT0 AW9 SHPCircle3 500 10 L4/S9 Red AT0 AH15 AL0 AW100 ASDL ASS200 BLINK 490 BPW15 F50 L-19/S9 Red AT85 AH15 AL0 AW100 ASDR ASS200 BLINK 490 BPW15 F50 L-19.
2019.06.17 19:35:09.051	EXCEPTION: Thread: 
2019.06.17 19:35:09.051	EXCEPTION: Message: Exception --> Cant parse the part FD800 of the ledcontrol table config setting  fd800 AH100 AL40 AT0 AW19 SHPCircle3 L13.
2019.06.17 19:35:09.051	EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting.ParseSettingData(String SettingData)
2019.06.17 19:35:09.051	EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting..ctor(String SettingData)
2019.06.17 19:35:09.051	EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigColumn.ParseColumnData(String ColumnData, Boolean ThrowExceptions)
2019.06.17 19:35:09.051	EXCEPTION: Targetsite: Void ParseSettingData(System.String)
2019.06.17 19:35:09.052	Warning: Previous exceptions occured in the line gs,S18 Red AH100 AL0 AT0 AW19 SHPCircle3 L5/S27 White AH100 AL0 AT0 AW19 SHPCircle3 L6/S29 Red AH100 AL0 AT0 AW19 SHPCircle3 L7/S16 White AH100 AL0 AT0 AW19 SHPCircle3 L8/S30 Yellow AH100 AL20 AT0 AW19 SHPCircle3 L9/S31 White AH100 AL20 AT0 AW19 SHPCircle3 L10/W17 White f200 AH100 AL20 AT0 AW19 SHPCircle3 L11/S1 Red AH100 AL40 AT0 AW19 SHPCircle3 L12/ fd800 AH100 AL40 AT0 AW19 SHPCircle3 L13/S11 Red AH100 AL40 AT0 AW19 SHPCircle3 L14/S25 White AH100 AL40 AT0 AW19 SHPCircle3 L15/W18 Yellow f200 AH100 AL40 AT0 AW19 SHPCircle3 L16/S28 White AH100 AL60 AT0 AW19 SHPCircle3 L17/S30 Yellow AH100 AL60 AT0 AW19 SHPCircle3 L18/S32 White AH100 AL60 AT0 AW19 SHPCircle3 L19/W19 White f200 AH100 AL60 AT0 AW19 SHPCircle3 L20/S16 White AH100 AL80 AT0 AW19 SHPCircle3 L21/S20 Red AH100 AL80 AT0 AW19 SHPCircle3 L22/S26 Yellow AH100 AL80 AT0 AW19 SHPCircle3 L23/S5 White AH30 AL0 AT0 AW9 SHPCircle3 300 L0/S5 White AH30 AL91 AT0 AW9 SHPCircle3 300 L0/S7 White AH30 AL0 AT0 AW9 SHPCircle3 300 L1/S7 White AH30 AL91 AT0 AW9 SHPCircle3 300 L1/S14 White AH30 AL0 AT0 AW9 SHPCircle3 300 L2/S14 White AH30 AL91 AT0 AW9 SHPCircle3 300 L2/W25 White AH30 AL0 AT0 AW9 SHPCircle3 500 10 L3/W25 White AH30 AL91 AT0 AW9 SHPCircle3 500 10 L3/W41 White AH30 AL0 AT0 AW9 SHPCircle3 500 10 L4/W41 White AH30 AL91 AT0 AW9 SHPCircle3 500 10 L4/S9 Red AT0 AH15 AL0 AW100 ASDL ASS200 BLINK 490 BPW15 F50 L-19/S9 Red AT85 AH15 AL0 AW100 ASDR ASS200 BLINK 490 BPW15 F50 L-19,S17 Red AT0 AH12 L0/S27 White f100 AT0 AH12 L1/S29 Red f100 AT0 AH12 L2/S16 White AT0 AH12 L3/W33 Green f50 AT0 AH12 L4/W34 Green f50 AT0 AH12 L5/W35 Green f50 AT0 AH12 L6/W36 Green f50 AT0 AH12 L7/W37 Green f50 AT0 AH12 L8,S16 White f100 AT0 AH12 L0/S19 Red AT0 AH12 L1/S26 Yellow f100 AT0 AH12 L2/W29 Blue f50 AT0 AH12 L3/W30 Blue f50 AT0 AH12 L4/W31 Blue f50 AT0 AH12 L5/W32 Blue f50 AT0 AH12 L6/W14 Red AT85  AH15 FU250 FD270 BLINK 500 of the ledcontrol file
2019.06.17 19:35:09.672	Failed: W16 CYAN
2019.06.17 19:35:09.672	Warning: Cant parse the trigger part W16 CYAN of the ledcontrol table config setting W16 Cyan AT0 AH15 AL0 AW100 ASDL ASS200 BLINK 490 BPW15 F50 L19.
2019.06.17 19:35:09.672	EXCEPTION: Could not parse setting W16 Cyan AT0 AH15 AL0 AW100 ASDL ASS200 BLINK 490 BPW15 F50 L19 in column data L39|W39 Cadet_blue AH100 AL0 AT0 AW14 SHPLetterT L15/L40|W39 Cadet_blue  AH100 AL20 AT0 AW14 SHPLetterI L15/L41|W39 Cadet_blue  AH100 AL60 AT0 AW14 SHPLetterM L15/L42|W39 Cadet_blue  AH100 AL80 AT0 AW14 SHPLetterE L15/W12 Orange  AH100 AL20 AT0 AW19 SHPCircle3 L3/W13 Dark_orange  AH100 AL40 AT0 AW19 SHPCircle3 L3/W14 Tomato  AH100 AL60 AT0 AW19 SHPCircle3 L3/S15 White AH30 AL0 AT0 AW9 SHPCircle3 300 L11/S15 White AH30 AL91 AT0 AW9 SHPCircle3 300 L11/L2|L20|L21 Dark_green L1 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/L8|L20|L21 Midnight_blue L2 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/L31 Blue L3 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/L32 Cyan L4 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/L33 Green L5 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/L34 Dark_magenta L6 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/S17 Gold 10 AT0 AL0 AH10 AW40 AS400 ADL L25/S17 Gold 10 AT0 AL60 AH10 AW40 AS400 ADR L25/S17 Gold 10 AT90 AL0 AH10 AW40 AS400 ADL L25/S17 Gold 10 AT90 AL60 AH10 AW40 AS400 ADR L25/S17 Gold 10 AT40 AL0 AH10 AW35 AS400 ADL L26/S17 Gold 10 AT40 AL65 AH10 AW35 AS400 ADR L26/S17 Gold 10 AT40 AL0 AH10 AW35 AS400 ADL L26/S17 Gold 10 AT40 AL65 AH10 AW35 AS400 ADR L26/S17 Gold 10 AL42 AW16 AT0 AH100 SHPCircle3 L2/S18 Gold 10 AT0 AL0 AH10 AW40 AS400 ADL L25/S18 Gold 10 AT0 AL60 AH10 AW40 AS400 ADR L25/S18 Gold 10 AT90 AL0 AH10 AW40 AS400 ADL L25/S18 Gold 10 AT90 AL60 AH10 AW40 AS400 ADR L25/S18 Gold 10 AT40 AL0 AH10 AW35 AS400 ADL L26/S18 Gold 10 AT40 AL65 AH10 AW35 AS400 ADR L26/S18 Gold 10 AT40 AL0 AH10 AW35 AS400 ADL L26/S18 Gold 10 AT40 AL65 AH10 AW35 AS400 ADR L26/S18 Gold 10 AL42 AW16 AT0 AH100 SHPCircle3 L2/S21 Gold 10 AT0 AL0 AH10 AW40 AS400 ADL L25/S21 Gold 10 AT0 AL60 AH10 AW40 AS400 ADR L25/S21 Gold 10 AT90 AL0 AH10 AW40 AS400 ADL L25/S21 Gold 10 AT90 AL60 AH10 AW40 AS400 ADR L25/S21 Gold 10 AT40 AL0 AH10 AW35 AS400 ADL L26/S21 Gold 10 AT40 AL65 AH10 AW35 AS400 ADR L26/S21 Gold 10 AT40 AL0 AH10 AW35 AS400 ADL L26/S21 Gold 10 AT40 AL65 AH10 AW35 AS400 ADR L26/S21 Gold 10 AL42 AW16 AT0 AH100 SHPCircle3 L2/S17 Green AH100 AL20 AT0 AW20 SHPCirclePulse/S18 Green AH100 AL40 AT0 AW20 SHPCirclePulse/S21 Green AH100 AL60 AT0 AW20 SHPCirclePulse/W39 Dark_red FD400 AL0 AW50 AH100 ADL AS300/W39 Dark_red FD400 AL50 AW50 AH100 ADR AS300/W39 Dark_red W200 FD400 AL0 AW50 AH100 ADL AS300/W39 Dark_red W200 FD400 AL50 AW50 AH100 ADR AS300/W39 White W300 AH100 AL0 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W39 White W150 AH100 AL20 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W39 White AH100 AL40 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W39 White W150 AH100 AL60 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W39 White W300 AH100 AL80 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W39 Dark_red L3 AT0/W39 Orange_red L4 AT0 AL0 AW50 BLINK F500 ASDL/W39 Orange_red L4 AT0 AL50 AW50 BLINK F500 ASDR/W39 White L1 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/W2 Red 1500 AH100 AL0 AW23 AT0 SHPRoundAndRound L19/W2 Red 1500 AH100 AL77 AW23 AT0 SHPRoundAndRound L19/W1 Red AH100 AL40 AT0 AW20 SHPRoundAndRound/W41|W7 Red L3 AT0/W41|W7 Red L4 AT0 AL0 AW50 BLINK F500 ASDL/W41|W7 Red L4 AT0 AL50 AW50 BLINK F500 ASDR/W39|W41|W7|W1|W2 Red AT0 AH15 AL0 AW100 ASDL ASS200 BLINK 490 BPW15 F50 L19/W39|W41|W7|W1|W2 Red AT85 AH15 AL0 AW100 ASDR ASS200 BLINK 490 BPW15 F50 L19/W16 Navy L11 AT0 AH20 F50 BLINK BPW10 ASDL/W16 White L12 AT0 AH20 F50 BLINK BPW10 ASDL W500/W16 Navy L11 AT80 AH20 F50 BLINK BPW10 ASDR/W16 White L12 AT80 AH20 F50 BLINK BPW10 ASDR W500/W16 White L13 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/W16 Cyan AT0 AH15 AL0 AW100 ASDL ASS200 BLINK 490 BPW15 F50 L19/W16 Blue AT85 AH15 AL0 AW100 ASDR ASS200 BLINK 490 BPW15 F50 L19/W16 Deep_pink AH100 AL40 AT0 AW20 SHPDiamondBoxPulse/W17 Dark_olive_green AH100 AL0 AW23 AT0 SHPRoundAndRound L19/W17 Dark_olive_green AH100 AL77 AW23 AT0 SHPRoundAndRound L19/W17 Aqua AH100 AL40 AT0 AW20 SHPPointPlop/W17 Blue_violet L13 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/W36 Amber FD400 AL0 AW50 AH100 ADL AS300/W36 Amber FD400 AL50 AW50 AH100 ADR AS300/W36 Amber W200 FD400 AL0 AW50 AH100 ADL AS300/W36 Amber W200 FD400 AL50 AW50 AH100 ADR AS300/W36 Red W300 AH100 AL0 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W36 Red W150 AH100 AL20 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W36 Red AH100 AL40 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W36 Red W150 AH100 AL60 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W36 Red W300 AH100 AL80 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W29 Light_steel_blue AH100 AL0 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500 W200/W29 Light_steel_blue AH100 AL20 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500 W150/W29 Light_steel_blue AH100 AL40 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500 W100/W29 Light_steel_blue AH100 AL60 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500 W50/W29 Light_steel_blue AH100 AL80 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500/W42 Blue_violet AH100 AL0 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500/W42 Blue_violet AH100 AL20 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500 W50/W42 Blue_violet AH100 AL40 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500 W100/W42 Blue_violet AH100 AL60 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500 W150/W42 Blue_violet AH100 AL80 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500 W200.
2019.06.17 19:35:09.673	EXCEPTION: Thread: 
2019.06.17 19:35:09.673	EXCEPTION: Message: Exception --> Cant parse the part W16 CYAN of the ledcontrol table config setting W16 Cyan AT0 AH15 AL0 AW100 ASDL ASS200 BLINK 490 BPW15 F50 L19.
2019.06.17 19:35:09.673	EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting.ParseSettingData(String SettingData)
2019.06.17 19:35:09.673	EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting..ctor(String SettingData)
2019.06.17 19:35:09.673	EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigColumn.ParseColumnData(String ColumnData, Boolean ThrowExceptions)
2019.06.17 19:35:09.673	EXCEPTION: Targetsite: Void ParseSettingData(System.String)
2019.06.17 19:35:09.673	Failed: W16 BLUE
2019.06.17 19:35:09.673	Warning: Cant parse the trigger part W16 BLUE of the ledcontrol table config setting W16 Blue AT85 AH15 AL0 AW100 ASDR ASS200 BLINK 490 BPW15 F50 L19.
2019.06.17 19:35:09.673	EXCEPTION: Could not parse setting W16 Blue AT85 AH15 AL0 AW100 ASDR ASS200 BLINK 490 BPW15 F50 L19 in column data L39|W39 Cadet_blue AH100 AL0 AT0 AW14 SHPLetterT L15/L40|W39 Cadet_blue  AH100 AL20 AT0 AW14 SHPLetterI L15/L41|W39 Cadet_blue  AH100 AL60 AT0 AW14 SHPLetterM L15/L42|W39 Cadet_blue  AH100 AL80 AT0 AW14 SHPLetterE L15/W12 Orange  AH100 AL20 AT0 AW19 SHPCircle3 L3/W13 Dark_orange  AH100 AL40 AT0 AW19 SHPCircle3 L3/W14 Tomato  AH100 AL60 AT0 AW19 SHPCircle3 L3/S15 White AH30 AL0 AT0 AW9 SHPCircle3 300 L11/S15 White AH30 AL91 AT0 AW9 SHPCircle3 300 L11/L2|L20|L21 Dark_green L1 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/L8|L20|L21 Midnight_blue L2 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/L31 Blue L3 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/L32 Cyan L4 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/L33 Green L5 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/L34 Dark_magenta L6 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/S17 Gold 10 AT0 AL0 AH10 AW40 AS400 ADL L25/S17 Gold 10 AT0 AL60 AH10 AW40 AS400 ADR L25/S17 Gold 10 AT90 AL0 AH10 AW40 AS400 ADL L25/S17 Gold 10 AT90 AL60 AH10 AW40 AS400 ADR L25/S17 Gold 10 AT40 AL0 AH10 AW35 AS400 ADL L26/S17 Gold 10 AT40 AL65 AH10 AW35 AS400 ADR L26/S17 Gold 10 AT40 AL0 AH10 AW35 AS400 ADL L26/S17 Gold 10 AT40 AL65 AH10 AW35 AS400 ADR L26/S17 Gold 10 AL42 AW16 AT0 AH100 SHPCircle3 L2/S18 Gold 10 AT0 AL0 AH10 AW40 AS400 ADL L25/S18 Gold 10 AT0 AL60 AH10 AW40 AS400 ADR L25/S18 Gold 10 AT90 AL0 AH10 AW40 AS400 ADL L25/S18 Gold 10 AT90 AL60 AH10 AW40 AS400 ADR L25/S18 Gold 10 AT40 AL0 AH10 AW35 AS400 ADL L26/S18 Gold 10 AT40 AL65 AH10 AW35 AS400 ADR L26/S18 Gold 10 AT40 AL0 AH10 AW35 AS400 ADL L26/S18 Gold 10 AT40 AL65 AH10 AW35 AS400 ADR L26/S18 Gold 10 AL42 AW16 AT0 AH100 SHPCircle3 L2/S21 Gold 10 AT0 AL0 AH10 AW40 AS400 ADL L25/S21 Gold 10 AT0 AL60 AH10 AW40 AS400 ADR L25/S21 Gold 10 AT90 AL0 AH10 AW40 AS400 ADL L25/S21 Gold 10 AT90 AL60 AH10 AW40 AS400 ADR L25/S21 Gold 10 AT40 AL0 AH10 AW35 AS400 ADL L26/S21 Gold 10 AT40 AL65 AH10 AW35 AS400 ADR L26/S21 Gold 10 AT40 AL0 AH10 AW35 AS400 ADL L26/S21 Gold 10 AT40 AL65 AH10 AW35 AS400 ADR L26/S21 Gold 10 AL42 AW16 AT0 AH100 SHPCircle3 L2/S17 Green AH100 AL20 AT0 AW20 SHPCirclePulse/S18 Green AH100 AL40 AT0 AW20 SHPCirclePulse/S21 Green AH100 AL60 AT0 AW20 SHPCirclePulse/W39 Dark_red FD400 AL0 AW50 AH100 ADL AS300/W39 Dark_red FD400 AL50 AW50 AH100 ADR AS300/W39 Dark_red W200 FD400 AL0 AW50 AH100 ADL AS300/W39 Dark_red W200 FD400 AL50 AW50 AH100 ADR AS300/W39 White W300 AH100 AL0 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W39 White W150 AH100 AL20 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W39 White AH100 AL40 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W39 White W150 AH100 AL60 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W39 White W300 AH100 AL80 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W39 Dark_red L3 AT0/W39 Orange_red L4 AT0 AL0 AW50 BLINK F500 ASDL/W39 Orange_red L4 AT0 AL50 AW50 BLINK F500 ASDR/W39 White L1 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/W2 Red 1500 AH100 AL0 AW23 AT0 SHPRoundAndRound L19/W2 Red 1500 AH100 AL77 AW23 AT0 SHPRoundAndRound L19/W1 Red AH100 AL40 AT0 AW20 SHPRoundAndRound/W41|W7 Red L3 AT0/W41|W7 Red L4 AT0 AL0 AW50 BLINK F500 ASDL/W41|W7 Red L4 AT0 AL50 AW50 BLINK F500 ASDR/W39|W41|W7|W1|W2 Red AT0 AH15 AL0 AW100 ASDL ASS200 BLINK 490 BPW15 F50 L19/W39|W41|W7|W1|W2 Red AT85 AH15 AL0 AW100 ASDR ASS200 BLINK 490 BPW15 F50 L19/W16 Navy L11 AT0 AH20 F50 BLINK BPW10 ASDL/W16 White L12 AT0 AH20 F50 BLINK BPW10 ASDL W500/W16 Navy L11 AT80 AH20 F50 BLINK BPW10 ASDR/W16 White L12 AT80 AH20 F50 BLINK BPW10 ASDR W500/W16 White L13 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/W16 Cyan AT0 AH15 AL0 AW100 ASDL ASS200 BLINK 490 BPW15 F50 L19/W16 Blue AT85 AH15 AL0 AW100 ASDR ASS200 BLINK 490 BPW15 F50 L19/W16 Deep_pink AH100 AL40 AT0 AW20 SHPDiamondBoxPulse/W17 Dark_olive_green AH100 AL0 AW23 AT0 SHPRoundAndRound L19/W17 Dark_olive_green AH100 AL77 AW23 AT0 SHPRoundAndRound L19/W17 Aqua AH100 AL40 AT0 AW20 SHPPointPlop/W17 Blue_violet L13 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/W36 Amber FD400 AL0 AW50 AH100 ADL AS300/W36 Amber FD400 AL50 AW50 AH100 ADR AS300/W36 Amber W200 FD400 AL0 AW50 AH100 ADL AS300/W36 Amber W200 FD400 AL50 AW50 AH100 ADR AS300/W36 Red W300 AH100 AL0 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W36 Red W150 AH100 AL20 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W36 Red AH100 AL40 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W36 Red W150 AH100 AL60 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W36 Red W300 AH100 AL80 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W29 Light_steel_blue AH100 AL0 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500 W200/W29 Light_steel_blue AH100 AL20 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500 W150/W29 Light_steel_blue AH100 AL40 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500 W100/W29 Light_steel_blue AH100 AL60 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500 W50/W29 Light_steel_blue AH100 AL80 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500/W42 Blue_violet AH100 AL0 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500/W42 Blue_violet AH100 AL20 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500 W50/W42 Blue_violet AH100 AL40 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500 W100/W42 Blue_violet AH100 AL60 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500 W150/W42 Blue_violet AH100 AL80 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500 W200.
2019.06.17 19:35:09.673	EXCEPTION: Thread: 
2019.06.17 19:35:09.673	EXCEPTION: Message: Exception --> Cant parse the part W16 BLUE of the ledcontrol table config setting W16 Blue AT85 AH15 AL0 AW100 ASDR ASS200 BLINK 490 BPW15 F50 L19.
2019.06.17 19:35:09.673	EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting.ParseSettingData(String SettingData)
2019.06.17 19:35:09.673	EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting..ctor(String SettingData)
2019.06.17 19:35:09.673	EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigColumn.ParseColumnData(String ColumnData, Boolean ThrowExceptions)
2019.06.17 19:35:09.673	EXCEPTION: Targetsite: Void ParseSettingData(System.String)
2019.06.17 19:35:09.674	Warning: Previous exceptions occured in the line tmfnt,L39|W39 Cadet_blue AH100 AL0 AT0 AW14 SHPLetterT L15/L40|W39 Cadet_blue  AH100 AL20 AT0 AW14 SHPLetterI L15/L41|W39 Cadet_blue  AH100 AL60 AT0 AW14 SHPLetterM L15/L42|W39 Cadet_blue  AH100 AL80 AT0 AW14 SHPLetterE L15/W12 Orange  AH100 AL20 AT0 AW19 SHPCircle3 L3/W13 Dark_orange  AH100 AL40 AT0 AW19 SHPCircle3 L3/W14 Tomato  AH100 AL60 AT0 AW19 SHPCircle3 L3/S15 White AH30 AL0 AT0 AW9 SHPCircle3 300 L11/S15 White AH30 AL91 AT0 AW9 SHPCircle3 300 L11/L2|L20|L21 Dark_green L1 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/L8|L20|L21 Midnight_blue L2 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/L31 Blue L3 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/L32 Cyan L4 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/L33 Green L5 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/L34 Dark_magenta L6 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/S17 Gold 10 AT0 AL0 AH10 AW40 AS400 ADL L25/S17 Gold 10 AT0 AL60 AH10 AW40 AS400 ADR L25/S17 Gold 10 AT90 AL0 AH10 AW40 AS400 ADL L25/S17 Gold 10 AT90 AL60 AH10 AW40 AS400 ADR L25/S17 Gold 10 AT40 AL0 AH10 AW35 AS400 ADL L26/S17 Gold 10 AT40 AL65 AH10 AW35 AS400 ADR L26/S17 Gold 10 AT40 AL0 AH10 AW35 AS400 ADL L26/S17 Gold 10 AT40 AL65 AH10 AW35 AS400 ADR L26/S17 Gold 10 AL42 AW16 AT0 AH100 SHPCircle3 L2/S18 Gold 10 AT0 AL0 AH10 AW40 AS400 ADL L25/S18 Gold 10 AT0 AL60 AH10 AW40 AS400 ADR L25/S18 Gold 10 AT90 AL0 AH10 AW40 AS400 ADL L25/S18 Gold 10 AT90 AL60 AH10 AW40 AS400 ADR L25/S18 Gold 10 AT40 AL0 AH10 AW35 AS400 ADL L26/S18 Gold 10 AT40 AL65 AH10 AW35 AS400 ADR L26/S18 Gold 10 AT40 AL0 AH10 AW35 AS400 ADL L26/S18 Gold 10 AT40 AL65 AH10 AW35 AS400 ADR L26/S18 Gold 10 AL42 AW16 AT0 AH100 SHPCircle3 L2/S21 Gold 10 AT0 AL0 AH10 AW40 AS400 ADL L25/S21 Gold 10 AT0 AL60 AH10 AW40 AS400 ADR L25/S21 Gold 10 AT90 AL0 AH10 AW40 AS400 ADL L25/S21 Gold 10 AT90 AL60 AH10 AW40 AS400 ADR L25/S21 Gold 10 AT40 AL0 AH10 AW35 AS400 ADL L26/S21 Gold 10 AT40 AL65 AH10 AW35 AS400 ADR L26/S21 Gold 10 AT40 AL0 AH10 AW35 AS400 ADL L26/S21 Gold 10 AT40 AL65 AH10 AW35 AS400 ADR L26/S21 Gold 10 AL42 AW16 AT0 AH100 SHPCircle3 L2/S17 Green AH100 AL20 AT0 AW20 SHPCirclePulse/S18 Green AH100 AL40 AT0 AW20 SHPCirclePulse/S21 Green AH100 AL60 AT0 AW20 SHPCirclePulse/W39 Dark_red FD400 AL0 AW50 AH100 ADL AS300/W39 Dark_red FD400 AL50 AW50 AH100 ADR AS300/W39 Dark_red W200 FD400 AL0 AW50 AH100 ADL AS300/W39 Dark_red W200 FD400 AL50 AW50 AH100 ADR AS300/W39 White W300 AH100 AL0 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W39 White W150 AH100 AL20 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W39 White AH100 AL40 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W39 White W150 AH100 AL60 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W39 White W300 AH100 AL80 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W39 Dark_red L3 AT0/W39 Orange_red L4 AT0 AL0 AW50 BLINK F500 ASDL/W39 Orange_red L4 AT0 AL50 AW50 BLINK F500 ASDR/W39 White L1 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/W2 Red 1500 AH100 AL0 AW23 AT0 SHPRoundAndRound L19/W2 Red 1500 AH100 AL77 AW23 AT0 SHPRoundAndRound L19/W1 Red AH100 AL40 AT0 AW20 SHPRoundAndRound/W41|W7 Red L3 AT0/W41|W7 Red L4 AT0 AL0 AW50 BLINK F500 ASDL/W41|W7 Red L4 AT0 AL50 AW50 BLINK F500 ASDR/W39|W41|W7|W1|W2 Red AT0 AH15 AL0 AW100 ASDL ASS200 BLINK 490 BPW15 F50 L19/W39|W41|W7|W1|W2 Red AT85 AH15 AL0 AW100 ASDR ASS200 BLINK 490 BPW15 F50 L19/W16 Navy L11 AT0 AH20 F50 BLINK BPW10 ASDL/W16 White L12 AT0 AH20 F50 BLINK BPW10 ASDL W500/W16 Navy L11 AT80 AH20 F50 BLINK BPW10 ASDR/W16 White L12 AT80 AH20 F50 BLINK BPW10 ASDR W500/W16 White L13 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/W16 Cyan AT0 AH15 AL0 AW100 ASDL ASS200 BLINK 490 BPW15 F50 L19/W16 Blue AT85 AH15 AL0 AW100 ASDR ASS200 BLINK 490 BPW15 F50 L19/W16 Deep_pink AH100 AL40 AT0 AW20 SHPDiamondBoxPulse/W17 Dark_olive_green AH100 AL0 AW23 AT0 SHPRoundAndRound L19/W17 Dark_olive_green AH100 AL77 AW23 AT0 SHPRoundAndRound L19/W17 Aqua AH100 AL40 AT0 AW20 SHPPointPlop/W17 Blue_violet L13 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/W36 Amber FD400 AL0 AW50 AH100 ADL AS300/W36 Amber FD400 AL50 AW50 AH100 ADR AS300/W36 Amber W200 FD400 AL0 AW50 AH100 ADL AS300/W36 Amber W200 FD400 AL50 AW50 AH100 ADR AS300/W36 Red W300 AH100 AL0 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W36 Red W150 AH100 AL20 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W36 Red AH100 AL40 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W36 Red W150 AH100 AL60 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W36 Red W300 AH100 AL80 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W29 Light_steel_blue AH100 AL0 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500 W200/W29 Light_steel_blue AH100 AL20 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500 W150/W29 Light_steel_blue AH100 AL40 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500 W100/W29 Light_steel_blue AH100 AL60 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500 W50/W29 Light_steel_blue AH100 AL80 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500/W42 Blue_violet AH100 AL0 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500/W42 Blue_violet AH100 AL20 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500 W50/W42 Blue_violet AH100 AL40 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500 W100/W42 Blue_violet AH100 AL60 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500 W150/W42 Blue_violet AH100 AL80 AT0 AW20 FD300 AFDEN30 AFMIN100 AFMAX140 500 W200,S19 White AL0 AT80 AW100 AH8 L3/S17 Gold AL0 AT25 AW100 AH10 L3/W9 Dark_red AL0 AT30 AW100 AH8 L3/W10 Crimson AL0 AT40 AW100 AH8 L3/W11 Red AL0 AT50 AW100 AH8 L3/W27 Corn_silk AL0 AT60 AW100 AH8 L3/L2|L20|L21 Forest_green L1 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/L8|L20|L21 Midnight_blue L2 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/L31 Blue L3 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/L32 Cyan L4 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/L33 Deep_pink L5 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/L34 White L6 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/L7 Magenta L3 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/S21 Gold 40 AT30 AL0 AH10 AW100 AS400 ADU L25/S21 Gold 40 AT35 AL0 AH20 AW100 AS400 ADD L25/S17 Cyan 40 AT17 AL0 AH10 AW100 AS400 ADU L25/S17 Cyan 40 AT20 AL0 AH10 AW100 AS400 ADD L25/W39|W18 Dark_orchid 700 AT85 AH15 AFDEN40 AFMIN100 AFMAX160/W39|W18 Blue_violet M50 MAX50 AH100 ADU AS300/W39 Dark_red L13 AT0/W39 Orange_red L4 AT0 AL0 AW50 BLINK F500 ASDL/W39 Orange_red L14 AT0 AL50 AW50 BLINK F500 ASDR/W18 Light_steel_blue 100 AT80 AH20 ADD AS300 L21/W20 Deep_pink 100 AT83 AH22 ADD AS400 L20/W39 White MAX200 AH100 ADU AS800 Blink 50 L19/W39 White L19 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/W36 Dark_orchid MAX200 AH100 ADU AS400 Blink 50/W36 Amber FD400 AL0 AW50 AH100 ADL AS300/W36 Amber FD400 AL50 AW50 AH100 ADR AS300/W36 Amber W200 FD400 AL0 AW50 AH100 ADL AS300/W36 Amber W200 FD400 AL50 AW50 AH100 ADR AS300/W36 Red W300 AH100 AL0 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W36 Red W150 AH100 AL20 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W36 Red AH100 AL40 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W36 Red W150 AH100 AL60 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W36 Red W300 AH100 AL80 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W12 Gold 40 AT48 AL0 AH10 AW100 AS400 ADU L25/W12 Gold 40 AT63 AL0 AH10 AW100 AS400 ADD L25/W13 Gold 45 AT48 AL0 AH10 AW100 AS300 ADU L25/W13 Gold 45 AT63 AL0 AH10 AW100 AS400 ADD L25/W27 Burly_wood 40 AT40 AL0 AH10 AW100 AS400 ADU L25/W27 Burly_wood 40 AT50 AL0 AH10 AW100 AS400 ADD L25/W28 Gold M50 MAX50 AH80 ADD AS300/W42 Lawn_green MAX200 AH100 ADD AS400 Blink 50/W42 Medium_blue L13 AT0 AFDEN15 AFMIN10 AFMAX20,S20 White AL0 AT80 AW100 AH8 L3/S18 Gold AL0 AT26 AW100 AH10 L3/W15 Deep_sky_blue AL0 AT40 AW100 AH8 L3/W32 Corn_silk AL0 AT60 AW100 AH8 L3/L2|L20|L21 Forest_green L1 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/L8|L20|L21 Midnight_blue L2 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/L31 Blue L3 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/L32 Cyan L4 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/L33 Deep_pink L5 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/L34 White L6 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/L7 Magenta L3 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/S21 Gold 40 AT30 AL0 AH10 AW100 AS400 ADU L25/S21 Gold 40 AT35 AL0 AH20 AW100 AS400 ADD L25/S18 Cyan 40 AT17 AL0 AH10 AW100 AS400 ADU L25/S18 Cyan 40 AT20 AL0 AH10 AW100 AS400 ADD L25/W39|W19 Dark_orchid 700 AT85 AH15 AFDEN40 AFMIN100 AFMAX160/W39|W19 Blue_violet M50 MAX50 AH100 ADU AS300/W39 Dark_red L13 AT0/W39 Orange_red L4 AT0 AL0 AW50 BLINK F500 ASDL/W39 Orange_red L14 AT0 AL50 AW50 BLINK F500 ASDR/W19 Light_steel_blue 100 AT80 AH20 ADD AS300 L21/W21 Deep_pink 100 AT83 AH22 ADD AS400 L20/W39 White MAX200 AH100 ADU AS800 Blink 50 L19/W39 White L19 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/W36 Amber FD400 AL0 AW50 AH100 ADL AS300/W36 Amber FD400 AL50 AW50 AH100 ADR AS300/W36 Amber W200 FD400 AL0 AW50 AH100 ADL AS300/W36 Amber W200 FD400 AL50 AW50 AH100 ADR AS300/W36 Red W300 AH100 AL0 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W36 Red W150 AH100 AL20 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W36 Red AH100 AL40 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W36 Red W150 AH100 AL60 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W36 Red W300 AH100 AL80 AT0 AW20 FD600 AFDEN20 AFMIN100 AFMAX140 500/W13 Gold 45 AT48 AL0 AH10 AW100 AS300 ADU L25/W13 Gold 45 AT63 AL0 AH10 AW100 AS400 ADD L25/W14 Gold 40 AT48 AL0 AH10 AW100 AS400 ADU L25/W14 Gold 40 AT63 AL0 AH10 AW100 AS400 ADD L25/W32 Burly_wood 40 AT40 AL0 AH10 AW100 AS400 ADU L25/W32 Burly_wood 40 AT50 AL0 AH10 AW100 AS400 ADD L25/W29 Forest_green 60 AW100 AH92 ADD AS300/W30 Gold 60 AW100 AH80 ADD AS300/W31 Midnight_blue L13 AT0 AFDEN15 AFMIN10 AFMAX20/W30 Dark_sea_green M50 MAX50 AH85 ADD AS300/W31 Green_yellow 60 AW100 AH77 ADD AS300 of the ledcontrol file
2019.06.17 19:35:09.893	Loading LedControl file C:\DIRECTOUTPUT\config\directoutputconfig40.ini
2019.06.17 19:35:09.895	Min DOF Version is 0.8 for file directoutputconfig40.ini
2019.06.17 19:35:10.079	Loading LedControl file C:\DIRECTOUTPUT\config\directoutputconfig41.ini
2019.06.17 19:35:10.080	Min DOF Version is 0.8 for file directoutputconfig41.ini
2019.06.17 19:35:10.148	4 directoutputconfig.ini or ledcontrol.ini files loaded.
2019.06.17 19:35:10.148	Config for RomName dof_test exists in LedControl data. Updating cabinet and config.
2019.06.17 19:35:10.150	Debug: Setting up shape effect for area. L: 0, T: 0, W: 19, H: 100
2019.06.17 19:35:10.150	Debug: Setting up shape effect for area. L: 0, T: 0, W: 19, H: 100
2019.06.17 19:35:10.151	Debug: Setting up shape effect for area. L: 0, T: 0, W: 19, H: 100
2019.06.17 19:35:10.151	Debug: Setting up shape effect for area. L: 20, T: 0, W: 19, H: 100
2019.06.17 19:35:10.151	Debug: Setting up shape effect for area. L: 20, T: 0, W: 19, H: 100
2019.06.17 19:35:10.151	Debug: Setting up shape effect for area. L: 20, T: 0, W: 19, H: 100
2019.06.17 19:35:10.151	Debug: Setting up shape effect for area. L: 40, T: 0, W: 19, H: 100
2019.06.17 19:35:10.151	Debug: Setting up shape effect for area. L: 40, T: 0, W: 19, H: 100
2019.06.17 19:35:10.151	Debug: Setting up shape effect for area. L: 40, T: 0, W: 19, H: 100
2019.06.17 19:35:10.151	Debug: Setting up shape effect for area. L: 60, T: 0, W: 19, H: 100
2019.06.17 19:35:10.151	Debug: Setting up shape effect for area. L: 60, T: 0, W: 19, H: 100
2019.06.17 19:35:10.151	Debug: Setting up shape effect for area. L: 60, T: 0, W: 19, H: 100
2019.06.17 19:35:10.151	Debug: Setting up shape effect for area. L: 80, T: 0, W: 19, H: 100
2019.06.17 19:35:10.151	Debug: Setting up shape effect for area. L: 80, T: 0, W: 19, H: 100
2019.06.17 19:35:10.151	Debug: Setting up shape effect for area. L: 80, T: 0, W: 19, H: 100
2019.06.17 19:35:10.151	Debug: Setting up shape effect for area. L: 0, T: 0, W: 9, H: 30
2019.06.17 19:35:10.151	Debug: Setting up shape effect for area. L: 91, T: 0, W: 9, H: 30
2019.06.17 19:35:10.158	Table config loading finished: romname=dof_test, tablename=dof_test_table_VPX
2019.06.17 19:35:10.158	Pinball parts loaded
2019.06.17 19:35:10.158	Starting processes
2019.06.17 19:35:10.158	Initializing cabinet
2019.06.17 19:35:10.158	Debug: Initializing output controllers
2019.06.17 19:35:10.201	TeensyStripController LEDStripController intialized and updater thread started.
2019.06.17 19:35:10.201	FT245RBitbangController FT245RBitbangController 0 with serial number A906M30B has been initialized and the updater thread has been started.
2019.06.17 19:35:10.202	FT245RBitbangController FT245RBitbangController 1 with serial number SM9EF has been initialized and the updater thread has been started.
2019.06.17 19:35:10.202	Debug: Output controllers initialized
2019.06.17 19:35:10.204	TeensyStripController LEDStripController updater thread  started.
2019.06.17 19:35:10.204	Cabinet initialized
2019.06.17 19:35:10.204	Loading shape definition file: C:\DirectOutput\Config\DirectOutputShapes.xml
2019.06.17 19:35:10.219	Debug: MatrixBase for RGBAMatrixColorScaleShapeEffect. Calculated area size: AreaDef(L:0, T:0, W:19, H:100), Matrix(W:129, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:128, Width:1, Height:129)
2019.06.17 19:35:10.221	Debug: MatrixBase for RGBAMatrixColorScaleBitmapEffect. Calculated area size: AreaDef(L:0, T:0, W:19, H:100), Matrix(W:129, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:128, Width:1, Height:129)
2019.06.17 19:35:10.225	Connection to FTDI chip A906M30B established.
2019.06.17 19:35:10.249	Debug: BitmapEffectBase. Grabbing image clip: W: 1, H:129, BML: 35, BMT: 18, BMW: 16, BMH: 16
2019.06.17 19:35:10.252	Debug: MatrixBase for RGBAMatrixColorScaleShapeEffect. Calculated area size: AreaDef(L:0, T:0, W:19, H:100), Matrix(W:129, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:128, Width:1, Height:129)
2019.06.17 19:35:10.252	Debug: MatrixBase for RGBAMatrixColorScaleBitmapEffect. Calculated area size: AreaDef(L:0, T:0, W:19, H:100), Matrix(W:129, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:128, Width:1, Height:129)
2019.06.17 19:35:10.252	Debug: BitmapEffectBase. Grabbing image clip: W: 1, H:129, BML: 35, BMT: 18, BMW: 16, BMH: 16
2019.06.17 19:35:10.252	Debug: MatrixBase for RGBAMatrixColorScaleShapeEffect. Calculated area size: AreaDef(L:0, T:0, W:19, H:100), Matrix(W:129, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:128, Width:1, Height:129)
2019.06.17 19:35:10.252	Debug: MatrixBase for RGBAMatrixColorScaleBitmapEffect. Calculated area size: AreaDef(L:0, T:0, W:19, H:100), Matrix(W:129, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:128, Width:1, Height:129)
2019.06.17 19:35:10.253	Debug: BitmapEffectBase. Grabbing image clip: W: 1, H:129, BML: 35, BMT: 18, BMW: 16, BMH: 16
2019.06.17 19:35:10.253	Debug: MatrixBase for RGBAMatrixColorScaleShapeEffect. Calculated area size: AreaDef(L:20, T:0, W:19, H:100), Matrix(W:129, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:128, Width:1, Height:129)
2019.06.17 19:35:10.253	Debug: MatrixBase for RGBAMatrixColorScaleBitmapEffect. Calculated area size: AreaDef(L:20, T:0, W:19, H:100), Matrix(W:129, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:128, Width:1, Height:129)
2019.06.17 19:35:10.253	Debug: BitmapEffectBase. Grabbing image clip: W: 1, H:129, BML: 35, BMT: 18, BMW: 16, BMH: 16
2019.06.17 19:35:10.253	Debug: MatrixBase for RGBAMatrixColorScaleShapeEffect. Calculated area size: AreaDef(L:20, T:0, W:19, H:100), Matrix(W:129, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:128, Width:1, Height:129)
2019.06.17 19:35:10.253	Debug: MatrixBase for RGBAMatrixColorScaleBitmapEffect. Calculated area size: AreaDef(L:20, T:0, W:19, H:100), Matrix(W:129, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:128, Width:1, Height:129)
2019.06.17 19:35:10.253	Debug: BitmapEffectBase. Grabbing image clip: W: 1, H:129, BML: 35, BMT: 18, BMW: 16, BMH: 16
2019.06.17 19:35:10.254	Debug: MatrixBase for RGBAMatrixColorScaleShapeEffect. Calculated area size: AreaDef(L:20, T:0, W:19, H:100), Matrix(W:129, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:128, Width:1, Height:129)
2019.06.17 19:35:10.254	Debug: MatrixBase for RGBAMatrixColorScaleBitmapEffect. Calculated area size: AreaDef(L:20, T:0, W:19, H:100), Matrix(W:129, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:128, Width:1, Height:129)
2019.06.17 19:35:10.254	Debug: BitmapEffectBase. Grabbing image clip: W: 1, H:129, BML: 35, BMT: 18, BMW: 16, BMH: 16
2019.06.17 19:35:10.254	Debug: MatrixBase for RGBAMatrixColorScaleShapeEffect. Calculated area size: AreaDef(L:40, T:0, W:19, H:100), Matrix(W:129, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:128, Width:1, Height:129)
2019.06.17 19:35:10.254	Debug: MatrixBase for RGBAMatrixColorScaleBitmapEffect. Calculated area size: AreaDef(L:40, T:0, W:19, H:100), Matrix(W:129, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:128, Width:1, Height:129)
2019.06.17 19:35:10.254	Debug: BitmapEffectBase. Grabbing image clip: W: 1, H:129, BML: 35, BMT: 18, BMW: 16, BMH: 16
2019.06.17 19:35:10.255	Debug: MatrixBase for RGBAMatrixColorScaleShapeEffect. Calculated area size: AreaDef(L:40, T:0, W:19, H:100), Matrix(W:129, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:128, Width:1, Height:129)
2019.06.17 19:35:10.255	Debug: MatrixBase for RGBAMatrixColorScaleBitmapEffect. Calculated area size: AreaDef(L:40, T:0, W:19, H:100), Matrix(W:129, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:128, Width:1, Height:129)
2019.06.17 19:35:10.255	Debug: BitmapEffectBase. Grabbing image clip: W: 1, H:129, BML: 35, BMT: 18, BMW: 16, BMH: 16
2019.06.17 19:35:10.255	Debug: MatrixBase for RGBAMatrixColorScaleShapeEffect. Calculated area size: AreaDef(L:40, T:0, W:19, H:100), Matrix(W:129, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:128, Width:1, Height:129)
2019.06.17 19:35:10.255	Debug: MatrixBase for RGBAMatrixColorScaleBitmapEffect. Calculated area size: AreaDef(L:40, T:0, W:19, H:100), Matrix(W:129, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:128, Width:1, Height:129)
2019.06.17 19:35:10.255	Debug: BitmapEffectBase. Grabbing image clip: W: 1, H:129, BML: 35, BMT: 18, BMW: 16, BMH: 16
2019.06.17 19:35:10.256	Debug: MatrixBase for RGBAMatrixColorScaleShapeEffect. Calculated area size: AreaDef(L:60, T:0, W:19, H:100), Matrix(W:129, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:128, Width:1, Height:129)
2019.06.17 19:35:10.256	Debug: MatrixBase for RGBAMatrixColorScaleBitmapEffect. Calculated area size: AreaDef(L:60, T:0, W:19, H:100), Matrix(W:129, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:128, Width:1, Height:129)
2019.06.17 19:35:10.256	Debug: BitmapEffectBase. Grabbing image clip: W: 1, H:129, BML: 35, BMT: 18, BMW: 16, BMH: 16
2019.06.17 19:35:10.256	Debug: MatrixBase for RGBAMatrixColorScaleShapeEffect. Calculated area size: AreaDef(L:60, T:0, W:19, H:100), Matrix(W:129, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:128, Width:1, Height:129)
2019.06.17 19:35:10.256	Debug: MatrixBase for RGBAMatrixColorScaleBitmapEffect. Calculated area size: AreaDef(L:60, T:0, W:19, H:100), Matrix(W:129, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:128, Width:1, Height:129)
2019.06.17 19:35:10.256	Debug: BitmapEffectBase. Grabbing image clip: W: 1, H:129, BML: 35, BMT: 18, BMW: 16, BMH: 16
2019.06.17 19:35:10.257	Debug: MatrixBase for RGBAMatrixColorScaleShapeEffect. Calculated area size: AreaDef(L:60, T:0, W:19, H:100), Matrix(W:129, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:128, Width:1, Height:129)
2019.06.17 19:35:10.257	Debug: MatrixBase for RGBAMatrixColorScaleBitmapEffect. Calculated area size: AreaDef(L:60, T:0, W:19, H:100), Matrix(W:129, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:128, Width:1, Height:129)
2019.06.17 19:35:10.257	Debug: BitmapEffectBase. Grabbing image clip: W: 1, H:129, BML: 35, BMT: 18, BMW: 16, BMH: 16
2019.06.17 19:35:10.257	Debug: MatrixBase for RGBAMatrixColorScaleShapeEffect. Calculated area size: AreaDef(L:80, T:0, W:19, H:100), Matrix(W:129, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:128, Width:1, Height:129)
2019.06.17 19:35:10.257	Debug: MatrixBase for RGBAMatrixColorScaleBitmapEffect. Calculated area size: AreaDef(L:80, T:0, W:19, H:100), Matrix(W:129, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:128, Width:1, Height:129)
2019.06.17 19:35:10.257	Debug: BitmapEffectBase. Grabbing image clip: W: 1, H:129, BML: 35, BMT: 18, BMW: 16, BMH: 16
2019.06.17 19:35:10.258	Debug: MatrixBase for RGBAMatrixColorScaleShapeEffect. Calculated area size: AreaDef(L:80, T:0, W:19, H:100), Matrix(W:129, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:128, Width:1, Height:129)
2019.06.17 19:35:10.258	Debug: MatrixBase for RGBAMatrixColorScaleBitmapEffect. Calculated area size: AreaDef(L:80, T:0, W:19, H:100), Matrix(W:129, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:128, Width:1, Height:129)
2019.06.17 19:35:10.258	Debug: BitmapEffectBase. Grabbing image clip: W: 1, H:129, BML: 35, BMT: 18, BMW: 16, BMH: 16
2019.06.17 19:35:10.258	Debug: MatrixBase for RGBAMatrixColorScaleShapeEffect. Calculated area size: AreaDef(L:80, T:0, W:19, H:100), Matrix(W:129, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:128, Width:1, Height:129)
2019.06.17 19:35:10.258	Debug: MatrixBase for RGBAMatrixColorScaleBitmapEffect. Calculated area size: AreaDef(L:80, T:0, W:19, H:100), Matrix(W:129, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:128, Width:1, Height:129)
2019.06.17 19:35:10.258	Debug: BitmapEffectBase. Grabbing image clip: W: 1, H:129, BML: 35, BMT: 18, BMW: 16, BMH: 16
2019.06.17 19:35:10.259	Debug: MatrixBase for RGBAMatrixColorScaleShapeEffect. Calculated area size: AreaDef(L:0, T:0, W:9, H:30), Matrix(W:129, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:38, Width:1, Height:39)
2019.06.17 19:35:10.259	Debug: MatrixBase for RGBAMatrixColorScaleBitmapEffect. Calculated area size: AreaDef(L:0, T:0, W:9, H:30), Matrix(W:129, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:38, Width:1, Height:39)
2019.06.17 19:35:10.259	Debug: BitmapEffectBase. Grabbing image clip: W: 1, H:39, BML: 35, BMT: 18, BMW: 16, BMH: 16
2019.06.17 19:35:10.259	Debug: MatrixBase for RGBAMatrixColorScaleShapeEffect. Calculated area size: AreaDef(L:91, T:0, W:9, H:30), Matrix(W:129, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:38, Width:1, Height:39)
2019.06.17 19:35:10.259	Debug: MatrixBase for RGBAMatrixColorScaleBitmapEffect. Calculated area size: AreaDef(L:91, T:0, W:9, H:30), Matrix(W:129, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:38, Width:1, Height:39)
2019.06.17 19:35:10.259	Debug: BitmapEffectBase. Grabbing image clip: W: 1, H:39, BML: 35, BMT: 18, BMW: 16, BMH: 16
2019.06.17 19:35:10.259	Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:15), Matrix(W:129, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:19, Width:1, Height:20)
2019.06.17 19:35:10.260	Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:85, W:100, H:15), Matrix(W:129, H:1), ResultArea(Left: 0, Top:109, Right:0, Bottom:128, Width:1, Height:20)
2019.06.17 19:35:10.260	Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:15), Matrix(W:129, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:19, Width:1, Height:20)
2019.06.17 19:35:10.260	Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:15), Matrix(W:129, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:19, Width:1, Height:20)
2019.06.17 19:35:10.260	Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:15), Matrix(W:129, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:19, Width:1, Height:20)
2019.06.17 19:35:10.260	Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:15), Matrix(W:8, H:48), ResultArea(Left: 0, Top:0, Right:47, Bottom:1, Width:48, Height:2)
2019.06.17 19:35:10.260	Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:15), Matrix(W:8, H:48), ResultArea(Left: 0, Top:0, Right:47, Bottom:1, Width:48, Height:2)
2019.06.17 19:35:10.260	Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:15), Matrix(W:8, H:48), ResultArea(Left: 0, Top:0, Right:47, Bottom:1, Width:48, Height:2)
2019.06.17 19:35:10.263	Connection to FTDI chip SM9EF established.
2019.06.17 19:35:10.265	Framework initialized.
2019.06.17 19:35:10.265	Have fun! :)
2019.06.17 19:35:10.501	EXCEPTION: TeensyStripController LEDStripController updater thread  could not connect to the controller. Thread will quit.
2019.06.17 19:35:10.501	EXCEPTION: Thread: TeensyStripController LEDStripController updater thread 
2019.06.17 19:35:10.501	EXCEPTION: Message: IOException --> The semaphore timeout period has expired.
2019.06.17 19:35:10.501	
2019.06.17 19:35:10.501	
2019.06.17 19:35:10.504	EXCEPTION: Stacktrace:    at System.IO.Ports.InternalResources.WinIOError(Int32 errorCode, String str)
2019.06.17 19:35:10.504	EXCEPTION: Stacktrace:    at System.IO.Ports.SerialStream.EndWrite(IAsyncResult asyncResult)
2019.06.17 19:35:10.504	EXCEPTION: Stacktrace:    at System.IO.Ports.SerialStream.Write(Byte[] array, Int32 offset, Int32 count, Int32 timeout)
2019.06.17 19:35:10.504	EXCEPTION: Stacktrace:    at System.IO.Ports.SerialPort.Write(Byte[] buffer, Int32 offset, Int32 count)
2019.06.17 19:35:10.504	EXCEPTION: Stacktrace:    at DirectOutput.Cab.Out.AdressableLedStrip.TeensyStripController.ConnectToController()
2019.06.17 19:35:10.504	EXCEPTION: Stacktrace:    at DirectOutput.Cab.Out.OutputControllerCompleteBase.UpdaterThreadDoIt()
2019.06.17 19:35:10.504	EXCEPTION: Targetsite: Void WinIOError(Int32, System.String)
2019.06.17 19:35:20.835	Finishing framework
2019.06.17 19:35:20.837	Finishing cabinet
2019.06.17 19:35:20.838	Debug: Finishing output controllers
2019.06.17 19:35:20.838	TeensyStripController LEDStripController finished and updater thread stopped.
2019.06.17 19:35:20.913	Connection to FTDI chip A906M30B closed.
2019.06.17 19:35:20.914	FT245RBitbangController FT245RBitbangController 0 with serial number A906M30B has been finished and the updater thread has been terminated.
2019.06.17 19:35:20.980	Connection to FTDI chip SM9EF closed.
2019.06.17 19:35:20.981	FT245RBitbangController FT245RBitbangController 1 with serial number SM9EF has been finished and the updater thread has been terminated.
2019.06.17 19:35:20.981	Debug: Output controllers finished
2019.06.17 19:35:20.981	Cabinet finished
2019.06.17 19:35:20.981	DirectOutput framework finished.
2019.06.17 19:35:20.981	Bye and thanks for using!

[Outhere]

Lets try this

You should not need the cabinet file for anything but the teensy

Move the cabinet file somewhere

 

Some of the error messages in the log file have nothing to do with your set up there's other things going on

We will try to get your shaker motor running 1st

So for now go on the DOF website and under My Account, Set LEDwiz and teensy to 0

For the Number of SainSmart Devices set it to 1 and save...

Set port 1 for the shaker all their ports with nothing

Unplug your 8 relay Saint smart board

For testing you may need to have the adjustment knob on the board set to 3/4

In your config folder Delete all the files that look like this -- directoutputconfig.ini - directoutputconfig30.ini - directoutputconfig40.ini

Then from the DOF website download the new files unzip him and put them in your config folder there may only be one

 

I'm assuming you have the (Zebs) instructions from the website

To test You may have to use a game (Attack from Mars)

Edited by Outhere, 18 June 2019 - 06:09 AM.

[zebulon]

Just to add to that, you should be able to test that the shaker motor is functioning properly using the relay test manager software found here .... https://www.zebsboar...c.php?f=38&t=54

 

It's a standalone executable and has nothing to do with DOF.

[smith482]

I will try both of your suggestions tonight. I have the relay test manager software already. it detected 2 sainsmarts but when manually reconized/activated in the software, both tests oddly control my 8 port sainsmart. (i.e. board 1 port 1 & board 2 port 1 control the same relay). I will disconnect the 8port sainsmart and retest. Just to clarify I did follow all of the setup instruction on your site and port 1 is set to the shaker in the DOFconfig tool.

[zebulon]

Yeah, that utility recognizes more than 1 board but doesn't operate on multiple serial numbers.  It runs with the 1st serial number it finds for both boards.

 

Unplug the relay board, test the shaker

 

Unplug the shaker, test the relay board

 

for the most reliable results.