Jump to content



Photo
- - - - -

Adjusting settings/dip switches Funhouse VP9


  • Please log in to reply
6 replies to this topic

#1 BigGiantHead

BigGiantHead

    Hobbyist

  • Members
  • PipPip
  • 30 posts

  • Flag: ---------

  • Favorite Pinball: Funhouse

Posted 18 September 2012 - 01:26 AM

Hey all,

Just wondering how I go about adjusting the gameplay settings for Funhouse? I remember on the original that if the ball drained within the first few seconds then you got the ball back but this doesn't seem to be enabled by default. Is it possible?

I've managed to work out other tables and the settings but this is a bit different so any tips on what I need to do would be great.

#2 ta2686

ta2686

    Retired ROM Settings Guru

  • VIP
  • 2,324 posts
  • Location:USA

  • Flag: United States of America

  • Favorite Pinball: ONE THAT WORKS!



Contributor

Posted 18 September 2012 - 12:03 PM

There are no dip switches for this table, all adjustments are made through the rom menu.

To access the rom menu:

Press the end key to open the coin door
Press the 0 key to enter the menu system
Press the 0 key to enter the main menu
If not at the adjustments (A) menu item, use the 8 and 9 keys to scroll through the options until you get to that menu item
Press 0 to enter that menu
Scroll through the menu options using the 8 and 9 keys
When you get to the option you want to adjust press the 0 key
Either use the 8 and 9 keys or the 1 key (depending on the option) to adjust the option
Press 0 to enter the change
When finished press the 7 key several times to exit the rom menu

I would also advise to download the Funhouse manual from the IPDB and use that the find the option you need to adjust and use the procedure above to adjust that option.

Hope this helps.
Need to set or reset replay levels on a particular table? These guides will help you:

For Non-DMD tables: Guide to reset replay levels on non-DMD tables

For DMD tables: Guide to set replay levels on DMD tables

Need to change the number of balls per game on a particular table? These guides will help you:

For Non-DMD tables: Guide to set number of balls per game on non-DMD tables

For DMD tables: Guide to set number of balls per game on DMD tables

Need to adjust the volume on DMD based tables? This guide will help you:

Guide to adjust volume on DMD tables

An alphabetical listing of VPM emulated tables with their MPU and links to their specific replay level, balls per game and volume adjustment procedures can be downloaded as an Excel spreadsheet from this link:

Excel Spreadsheet of VPM emulated tables

#3 ta2686

ta2686

    Retired ROM Settings Guru

  • VIP
  • 2,324 posts
  • Location:USA

  • Flag: United States of America

  • Favorite Pinball: ONE THAT WORKS!



Contributor

Posted 18 September 2012 - 01:28 PM

Correction to the above post:

You should use the 1 key to make adjustments to the options. 8 and 9 just scroll through the options unless you are adjusting the rom volume. You would use 8 and 9 to adjust the volume from the rom.
Need to set or reset replay levels on a particular table? These guides will help you:

For Non-DMD tables: Guide to reset replay levels on non-DMD tables

For DMD tables: Guide to set replay levels on DMD tables

Need to change the number of balls per game on a particular table? These guides will help you:

For Non-DMD tables: Guide to set number of balls per game on non-DMD tables

For DMD tables: Guide to set number of balls per game on DMD tables

Need to adjust the volume on DMD based tables? This guide will help you:

Guide to adjust volume on DMD tables

An alphabetical listing of VPM emulated tables with their MPU and links to their specific replay level, balls per game and volume adjustment procedures can be downloaded as an Excel spreadsheet from this link:

Excel Spreadsheet of VPM emulated tables

#4 BigGiantHead

BigGiantHead

    Hobbyist

  • Members
  • PipPip
  • 30 posts

  • Flag: ---------

  • Favorite Pinball: Funhouse

Posted 18 September 2012 - 11:55 PM

Thanks heaps for that! While I couldn't find the setting to enable the ball save, I did find it very useful for other things. Perhaps the ball save is more a ROM thing?

Anyway, your advice is very much appreciated :)

#5 ta2686

ta2686

    Retired ROM Settings Guru

  • VIP
  • 2,324 posts
  • Location:USA

  • Flag: United States of America

  • Favorite Pinball: ONE THAT WORKS!



Contributor

Posted 19 September 2012 - 02:07 AM

Yes, that setting is a rom setting. I haven't checked the manual to see if there is a ball save option, but if there was one it would be noted in the Funhouse manual. It may not be in the Adjustments menu option but another menu option (if there is one at all) but it would be of assistance to you to look through that manual to see what options are available to you when you go into the rom menu.

Hope this helps.
Need to set or reset replay levels on a particular table? These guides will help you:

For Non-DMD tables: Guide to reset replay levels on non-DMD tables

For DMD tables: Guide to set replay levels on DMD tables

Need to change the number of balls per game on a particular table? These guides will help you:

For Non-DMD tables: Guide to set number of balls per game on non-DMD tables

For DMD tables: Guide to set number of balls per game on DMD tables

Need to adjust the volume on DMD based tables? This guide will help you:

Guide to adjust volume on DMD tables

An alphabetical listing of VPM emulated tables with their MPU and links to their specific replay level, balls per game and volume adjustment procedures can be downloaded as an Excel spreadsheet from this link:

Excel Spreadsheet of VPM emulated tables

#6 IPJball

IPJball

    Enthusiast

  • Members
  • PipPipPip
  • 64 posts
  • Location:United States

  • Flag: United States of America

  • Favorite Pinball: Indiana Jones, Funhouse, Bride of Pinbot, Phantom of the Opera, + more!

Posted 03 July 2013 - 07:17 AM

Hi,

I just pressed 0 after it says "test results available, press enter for report", and it said to check switches for several

places on the Funhouse table.  I was wondering if this is normal, since I've been playing this without problems for as long

as I've had it.  I also tried other versions from other creators of Funhouse mods, (vp8 is one of them), and it says the same

"check switches" for them too.  I think I really should use common sense and tell myself this isn't a real physical table that would

have these "check switches" messages, but I'm still kind of worried.  But, I read the actual pdf Funhouse manual, that said these

messages come up because a ramp or switch hasn't been activated in a while, or if it is stuck in the "on" position when powered on. 

I just hope someone will tell me this is normal for VP9 Funhouse, and set my worries to rest.

Thanks!



#7 IPJball

IPJball

    Enthusiast

  • Members
  • PipPipPip
  • 64 posts
  • Location:United States

  • Flag: United States of America

  • Favorite Pinball: Indiana Jones, Funhouse, Bride of Pinbot, Phantom of the Opera, + more!

Posted 03 July 2013 - 09:47 AM

Hi again,

Solved!  Just played the game until I hit every switch.  I didn't realize how often I've been playing, but not often enough!

I hit all the switches that needed it, including the right inner flipper switch, (which is a huge pain, had to time it right and nudge it in.)

I'm guessing people usually don't get to that switch because of the insane hard placement of it.  Anyways, now there are no more test results

after it tests at start up, and no more problem.  So never mind, Solved!

IPJball