Jump to content



Photo
- - - - -

Big Betty's Truck Stop Pinball


  • Please log in to reply
3 replies to this topic

#1 kcoleman10

kcoleman10

    Neophyte

  • Members
  • Pip
  • 1 posts

  • Flag: United States of America

  • Favorite Pinball: Big Betty's Truck Stop

Posted 17 January 2012 - 11:46 PM

I just purchased a Bally's Big Betty Truck Stop Pinball machine. The machine was missing the coin box and I'm not sure if its a neccessary component to getting credits to play. I have the door opened on the machine and can't seem to find what triggers the credits when you put a quarter in. Any help would be appreciated. Thanks.


#2 destruk

destruk

    VPF Veteran

  • VPF Staff
  • 6,338 posts
  • Location:Colorado Springs, CO

  • Flag: United States of America

  • Favorite Pinball: Ultrapin!



Posted 18 January 2012 - 12:24 AM

QUOTE (kcoleman10 @ Jan 17 2012, 04:46 PM) <{POST_SNAPBACK}>
I just purchased a Bally's Big Betty Truck Stop Pinball machine. The machine was missing the coin box and I'm not sure if its a neccessary component to getting credits to play. I have the door opened on the machine and can't seem to find what triggers the credits when you put a quarter in. Any help would be appreciated. Thanks.


Congratulations on your new machine! This game is a whole lot of fun - I play it a lot.
The coin box isn't needed to play the game - it simply collects inserted coins. In the coin door there are slots, on the inside of the door those slots should have wire switches that move when a coin is put into the slot. You can also trigger the switch wires by hand with the coin door open.

The Bally 6803 machines like Truck Stop shipped without any adjustments set for credits/coin. There could be a numeric keypad to access the diagnostics and adjustments for the machine. It's as easy as A-B-C - or so they say. smile.gif
If you don't have the numeric keypad accessory then you should have three buttons inside the cabinet or coin door to do some limited adjustments.

The manual is here:
http://mirror2.ipdb....Stop_Manual.pdf

Look at page 18 - section "2-2"
The coin setup procedure is on "2-5" or page 21 of the pdf - and "2-6"

Edited by destruk, 18 January 2012 - 12:25 AM.

Build a fire, vipers love the heat.


#3 Joe

Joe

    Pinball Wizard

  • VIP
  • 2,371 posts
  • Location:60016

  • Flag: United States of America

  • Favorite Pinball: New Stern ones

Posted 18 January 2012 - 05:55 AM

The lane Steer ramp area is off in the VP table get's some pics of that area. I think moded the VP table to be like the real game.

There could be a numeric keypad I don't think truck stop has it. It uses the flipper buttons.

Also what rom ver do you have?? You may have a newer or older rom then what is pinmame.

#4 Sabbat

Sabbat

    The Pinball Monk

  • VIP
  • 4,510 posts
  • Location:Aberdeen, WA

  • Flag: United States of America

  • Favorite Pinball: Solar Ride, Centaur, Gorgar, Cyclopes, Fathom, Frontier, ElviraATPM, Atlantis, Hang Glider, Mystic, Old Chicago, Ed/Gordon Gottliebs

  • PS3 Gamer Tag: SabbatM
  • 360 Gamer Tag: Mions Hill


Posted 18 January 2012 - 01:56 PM

Welcome to the forums. This is the first time I heard "Big Betty" Thrown in front of Truck Stop. Thank you, I did not know this table had a full title like that. I went and did some backglass inspecting afterwards. Never noticed the words Big Betty up there b4 at times when i've looked up the machine.

I hope it all gets working for you !
If you have a widescreen 16:9 monitor and want to play your VP9 desktop tables without them being stretched, check out This Link