11 replies to this topic

[Hanson]

Hello ,

next FP release .

Very good gameplay and flipper-settings .

Thanks to GLXB & highlnder00 and SLAM for the mod .

Here is the video as usual .

Merry Christmas and a happy 2012 .




http://www.youtube.c...p;v=DsRSP_mAfc8

[Arcade4]

Hello ,

next FP release .

Very good gameplay and flipper-settings .

Thanks to GLXB & highlnder00 and SLAM for the mod .

Here is the video as usual .

Merry Christmas and a happy 2012 .




http://www.youtube.c...p;v=DsRSP_mAfc8

I love just before the 7 min. mark in the video where the two quotes combine to say "Mom, you gotta drop your pants" lol

[rosve]

This table made me try FP on my cab again, but I have one question; Is it possible to make it display correctly in a cab? It looks like a cab inside a cab
Am I missing something or is that how it is supposed to look?

[moogster66]

This table made me try FP on my cab again, but I have one question; Is it possible to make it display correctly in a cab? It looks like a cab inside a cab
Am I missing something or is that how it is supposed to look?

You have to create a shortcut for the FP.exe. Then right click the new .exe and open PROPERTIES. Then paste this into the target line:

"C:\Games\Future Pinball\Future Pinball.exe" /ArcadeRender

This is assuming that you have FP installed in "C:\Games\Future Pinball\Future Pinball.exe"

You will have to change the location if FP is not installed in the default location. Then just start FP using your new shortcut.

Remember that when the table has started, you will have to hit the scroll button to get the arcade render adjustments up so you can stretch the table and backglass images.

Edited by moogster66, 22 December 2011 - 11:32 PM.

[rosve]

This table made me try FP on my cab again, but I have one question; Is it possible to make it display correctly in a cab? It looks like a cab inside a cab
Am I missing something or is that how it is supposed to look?

You have to create a shortcut for the FP.exe. Then right click the new .exe and open PROPERTIES. Then paste this into the target line:

"C:\Games\Future Pinball\Future Pinball.exe" /ArcadeRender

This is assuming that you have FP installed in "C:\Games\Future Pinball\Future Pinball.exe"

You will have to change the location if FP is not installed in the default location. Then just start FP using your new shortcut.

Remember that when the table has started, you will have to hit the scroll button to get the arcade render adjustments up so you can stretch the table and backglass images.

Thanks, that worked.

Can't use the backglass on my second display. It just flickers for a while then FP totally locks up. Probably a graphics driver issue. I am giving up on FP (again).

[thewool]

This table made me try FP on my cab again, but I have one question; Is it possible to make it display correctly in a cab? It looks like a cab inside a cab
Am I missing something or is that how it is supposed to look?

You have to create a shortcut for the FP.exe. Then right click the new .exe and open PROPERTIES. Then paste this into the target line:

"C:\Games\Future Pinball\Future Pinball.exe" /ArcadeRender

This is assuming that you have FP installed in "C:\Games\Future Pinball\Future Pinball.exe"

You will have to change the location if FP is not installed in the default location. Then just start FP using your new shortcut.

Remember that when the table has started, you will have to hit the scroll button to get the arcade render adjustments up so you can stretch the table and backglass images.

Thanks, that worked.

Can't use the backglass on my second display. It just flickers for a while then FP totally locks up. Probably a graphics driver issue. I am giving up on FP (again).

Hello Roger, I had a problem like that a while back with FP. Are you using 3 monitors? FP didn't like handling outputs on two different gfx cards so I had to swap the outputs so that the PF and the BG were on the same card. Think I also had to have them both set at 16 or 32 bit. Make sure you set your BG correctly in the video options.

I'm not an FP expert but these are just things to try.

[pincade]

Nice table!

Edited by pincade, 13 January 2015 - 12:03 AM.

[STAT]

i wish, there would be on VP too

Edited by STAT, 13 January 2015 - 08:52 AM.

[jukedock]

There is a work in progress Family Guy for Visual Pinball.  Preview video here:

 

 

Edited by jukedock, 21 January 2015 - 02:00 PM.

[Pinball999]

Anyone knows why Groni stopped to communicate on this one?

[jukedock]

Anyone knows why Groni stopped to communicate on this one?

He has not been active on the forums since mid-December.  I guess real life stuff is in the way of his VP at the moment.

[mlenardon]

This is a very nice table.  When I use Pinball X to launch it the playfield will not render properly.  If I launch with BAM FPLauncher seperate it works fine?

 

Michael