[Edit]: disregard the comments below, it looks like I downloaded a different version of this table from somewhere else (not the JPG-PINS version). I'll have to play this version to see if any of the comments below still apply.
After playing this table a bit, it seems like the outlanes are very hungry, resulting in short playtime per ball. In fact, its not that much fun because the balltime is so short. After looking at the table layout diagram in the Owner's Manual, and comparing to the table layout in the
VP editor, I noticed that the rightmost lane divider is lower than it should be. In fact, it should be high enough for the ball to roll up the right flipper and into the right drain. I raised this lane wall, and raised the left drain wall a bit, and the table plays much better. It still loses the ball to the drains, but you get about twice as much ball time. Also, it adds a new challenge with trapping the ball on the right flipper.
After making the modification above, the center drain seemed too hungry due to the wide space between the flippers. I added a post (copied one of the pin posts from the table) between the flippers, right on top of the bike steering post graphic on the table. With this last change, the table is much more fun, and you lose the ball more due to mistakes than random chance.
I can upload this modded table, but I'll need permission from the authors (or is there someone I can send it to, and they can review/upload it?).
Edited by David_OSU, 07 April 2009 - 09:10 PM.