Here is the procedure to set number of balls on Capcom tables:
1. Press 7 to enter menu system.
2. Using the shift keys, cycle through the menus until you see Adjustments
3. Press 1 to select that menu
4. You should see B1. Standard highlighted. Press 1 to select that menu
5. Using the shift keys, cycle through the menu items until you see Balls per Game in the DMD
6. Press 1 to change this value.
7. Using the left and right shift keys, select the number of balls per game (between 1 and 10)
8. Press the 1 key to accept the changes.
9. To exit the menu system, press the 7 key once.
This procedure should work on the following tables:
Capcom tables:
Pinball Magic, Airborne, Breakshot, Big Bang Bar, Flipper Football*, Kingpin^
*- for this table, number of balls per game is disabled
1. Press 7 to enter menu system.
2. Using the shift keys, cycle through the menus until you see Adjustments
3. Press 1 to select that menu
4. You should see B1. Standard highlighted. Press 1 to select that menu
5. Using the shift keys, cycle through the menu items until you see Balls per Game in the DMD
6. Press 1 to change this value.
7. Using the left and right shift keys, select the number of balls per game (between 1 and 10)
8. Press the 1 key to accept the changes.
9. To exit the menu system, press the 7 key once.
This procedure should work on the following tables:
Capcom tables:
Pinball Magic, Airborne, Breakshot, Big Bang Bar, Flipper Football*, Kingpin^
*- for this table, number of balls per game is disabled