Here is the procedure to set number of balls on first generation Game Plan MPU-2 tables. These are all full size pinball machines rather than the cocktail tables Game Plan produced using their MPU-1 system.
1. Press F6 to bring up dipswitch menu
2. Click on dipswitch 28 for 5 balls, clear dipswitch 28 for 3 balls
3. Click OK button to save your changes
4. Press F3 to reset the table
This procedure should work for the following tables:
First Generation Game Plan MPU-2 Tables:
Sharpshooter, Coney Island, Pinball Lizard, Global Warfare, Super Nova*, Sharpshooter II*, Attilla the Hun, Agents 777
*- for these tables, there is a custom dipswitch menu, click the radio button in the balls per game section for 3 balls or 5 balls
1. Press F6 to bring up dipswitch menu
2. Click on dipswitch 28 for 5 balls, clear dipswitch 28 for 3 balls
3. Click OK button to save your changes
4. Press F3 to reset the table
This procedure should work for the following tables:
First Generation Game Plan MPU-2 Tables:
Sharpshooter, Coney Island, Pinball Lizard, Global Warfare, Super Nova*, Sharpshooter II*, Attilla the Hun, Agents 777
*- for these tables, there is a custom dipswitch menu, click the radio button in the balls per game section for 3 balls or 5 balls