Jump to content



Photo
* * * * * 2 votes

usb dot matrix driver board - who wants one?


  • Please log in to reply
1473 replies to this topic

#1361 Arkay

Arkay

    Hobbyist

  • Members
  • PipPip
  • 35 posts

  • Flag: Australia

  • Favorite Pinball: Terminator 2, Addams Family, Meteor, Pharoah

Posted 15 August 2012 - 11:15 AM

To be honest it would be weird that an external card acted the same way even with the same drivers, there's no real way to tell what's going on. You could spend a fortune on trying to fix it. I'd just grab another motherboard and be done with it.

It could take a lot of work to find the fault, re-installing, trying Xp instead of Win7 if that's what you're using etc etc. There's no way to even be sure that it is a "slow" USB implementation..

A new motherboard won't cost a lot for a cabinet setup. Can even be a small form factor board as you don't need any expansion other than maybe a slot for a sound card.

Might be quicker and easier just to bite the bullet, write it off to strangeness in Windows or the hardware or the combination of both. It won't be anything to do with the pinDMD or the display as all of us happily use the combination daily. Just a one off that you might never resolve.. As much as it'd be nice to know exactly why ,if you want to get past it the new motherboard is going to be the quickest way and you can only beat your head against a wall for so long.

Cheers,

Arkay.

Edited by Arkay, 15 August 2012 - 11:18 AM.


#1362 talon

talon

    Hobbyist

  • Members
  • PipPip
  • 41 posts
  • Location:Near Manchester UK

  • Flag: England

  • Favorite Pinball: Medieval Madness

Posted 15 August 2012 - 06:33 PM

could it be anything to do with USB port polling frequency?
just a thought

#1363 RNunez187

RNunez187

    Enthusiast

  • Platinum Supporter
  • 250 posts
  • Location:Mundelein, IL

  • Flag: United States of America

  • Favorite Pinball: Scared Stiff

  • PS3 Gamer Tag: RNunez187
  • 360 Gamer Tag: RNunez187

Posted 15 August 2012 - 07:09 PM

Would this board work with a desktop also or is it strictly for cabinet users? If it would work, what exactly would I need?

PinDMD board
LED Display(Vishay)
Power for the display?

Considering this as it seems like it would add to the experience. Already bought a new PC and a new monitor mount so I can pivot it for FS tables, so why not go all out with what I have for the time being.

Thanks,

Rudy

stfsgv.png


#1364 PinKitty

PinKitty

    Enthusiast

  • Members
  • PipPipPip
  • 96 posts

  • Flag: United States of America

  • Favorite Pinball: High Roller Casino

Posted 15 August 2012 - 09:56 PM

Yeah, I am ready to chalk it up as a crappy ASRock motherboard. My head hurts from beating it against the brick wall. whtflag.gif

@RNunez187, yes this pinDMD board will work with a desktop, as long as it has a USB 2.0 port. The board comes with a ribbon cable that plugs into the display. You will need a mini-USB to USB cable to power the pinDMD board. You can get the power to run your DMD display from the computer's power supply.



#1365 Flying Dutchman

Flying Dutchman

    Pinball Wizard

  • VIP
  • 3,259 posts

  • Flag: ---------

  • Favorite Pinball: Medieval Madness / Champion Pub



Posted 16 August 2012 - 12:06 AM

QUOTE (russdx @ Aug 14 2012, 03:01 PM) <{POST_SNAPBACK}>
@Flying Dutchman

if you take a picture of the connector ill label how you connect it up smile.gif


DMD is ordered so it will take a while until I can upload a pic. wink.gif => anyone?

Cheers,
FD.

'Flying Dutchman'

In need for a Backglass or 'Active Backglass / UVP' please 'click' on below and visit the complete revised website at:
Posted Image

#1366 RNunez187

RNunez187

    Enthusiast

  • Platinum Supporter
  • 250 posts
  • Location:Mundelein, IL

  • Flag: United States of America

  • Favorite Pinball: Scared Stiff

  • PS3 Gamer Tag: RNunez187
  • 360 Gamer Tag: RNunez187

Posted 18 August 2012 - 01:15 AM

Just saw that these are now sold out. Any plans to make more or are you focusing on the newer version?

stfsgv.png


#1367 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 18 August 2012 - 12:22 PM

Noah will have a few more for sale very soon at virtuapin.net smile.gif

#1368 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 18 August 2012 - 05:45 PM

@Flying Dutchman / any one else wanting to wire up a pinLED DMD

here is a picture of mine with the sticker, although im pretty sure its using a bridge rectifier so it doesn't actually matter which way round + and - go (seeing as they have 2 red wires as well im pretty sure this is the case)




#1369 Flying Dutchman

Flying Dutchman

    Pinball Wizard

  • VIP
  • 3,259 posts

  • Flag: ---------

  • Favorite Pinball: Medieval Madness / Champion Pub



Posted 18 August 2012 - 09:34 PM

QUOTE (russdx @ Aug 18 2012, 07:45 PM) <{POST_SNAPBACK}>
@Flying Dutchman / any one else wanting to wire up a pinLED DMD

here is a picture of mine with the sticker, although im pretty sure its using a bridge rectifier so it doesn't actually matter which way round + and - go (seeing as they have 2 red wires as well im pretty sure this is the case)



Thanks for the effort of posting a pic russdx! dblthumb.gif

Looks pretty straight forward .. if I simply hook it up to the 2nd powersupply 5V (I'm already using to power up 4 fans on my Cab) I should be fine.

Thanks again!

Cheers,
FD.

Edited by Flying Dutchman, 18 August 2012 - 09:35 PM.

'Flying Dutchman'

In need for a Backglass or 'Active Backglass / UVP' please 'click' on below and visit the complete revised website at:
Posted Image

#1370 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 18 August 2012 - 10:23 PM

i run my pinLED at 12v (i tried 5v first but it was very dim and obviously not correct, and 12v was perfect)

the vishay dmds are 5v but these (unless the new ones are different?) are 12v smile.gif

#1371 vulbas

vulbas

    Enthusiast

  • Members
  • PipPipPip
  • 216 posts
  • Location:villebon sur yvette (essonne)

  • Flag: France

  • Favorite Pinball: medieval madness

Posted 25 August 2012 - 10:11 PM

hello russ,
when do you think your card will be on sale on your site ?
I will be ordering 20002 on pinled this month.

#1372 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 25 August 2012 - 10:24 PM

i dont have any more sad.gif

virtuapin.net has the last few smile.gif

Edited by russdx, 25 August 2012 - 10:25 PM.


#1373 vulbas

vulbas

    Enthusiast

  • Members
  • PipPipPip
  • 216 posts
  • Location:villebon sur yvette (essonne)

  • Flag: France

  • Favorite Pinball: medieval madness

Posted 26 August 2012 - 06:31 PM

what a shame. because I'm in France and the shipping is expensive from usa. in addition there is the customs sad.gif

#1374 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 26 August 2012 - 08:06 PM

i have 1 more uk stock, i kept it for my self as the usb cable wobbles a bit in the usb connector but it works fine other then the slightly lose connector fit.

I can send that from the uk if your interested. (no customs fee, cheaper postage)

#1375 vulbas

vulbas

    Enthusiast

  • Members
  • PipPipPip
  • 216 posts
  • Location:villebon sur yvette (essonne)

  • Flag: France

  • Favorite Pinball: medieval madness

Posted 26 August 2012 - 08:27 PM

you have a pm whistle.gif biggrin.gif

#1376 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 26 August 2012 - 09:05 PM

no problem smile.gif just checked it, works fine even when u wiggle the connector a bit hehe (also noticed if u press down the usb connector clip it firms it up) so its fine smile.gif

#1377 JayP

JayP

    Enthusiast

  • Members
  • PipPipPip
  • 50 posts
  • Location:In the man cave located somewhere dark in South West London!

  • Flag: England

  • Favorite Pinball: ATFM, MM, TAF, CV, SS, TFTC...

Posted 28 August 2012 - 12:25 AM

Hi Chaps

Been been busy with work but I have tried a USB daughter card, had to wait for new one to be delivered. Same result with the new card sad.gif

On the plus side I think you are spot on with a power issue Russ but it is the cab PSU. I removed the 'dodgy' cab PSU and installed it in another machine, installed a fresh install of everything OS included and the problem was still there. Only component from the cab was the PSU. I have verified the PinDMD, DMD and external 'DMD' PSU on the ION330. So time to RMA my OCZ 850w as it would appear to be the culprit. I didn't have any other harware to test it with before, all other kit I have is OEM and not standard ATX.

I have managed to get the same issue as PinKitty on an HP 8100 Elite SFF not sure of the exact specs but it's i7 with 8GB of ram Win7 Pro x64. I was going to use the box just to run the VPinMameTest program but the display was just garbled. Didn't matter what USB port I tried or removing the drivers that windows update installed for the pindmd and installing from FTDI website. If anyone cares for the specs or any testing needed let me know, just wondered if it was the same chipset as PinKitty's machine.

Jay

Edited by JayP, 28 August 2012 - 12:29 AM.


#1378 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 28 August 2012 - 12:40 AM

really strange how some motherboards really don't like the fast frame transfer using the FTDI d2xx lib

it looks like using a separate psu for the DMD seams to be the best option smile.gif Noah sells a nice little one on his site smile.gif

#1379 JayP

JayP

    Enthusiast

  • Members
  • PipPipPip
  • 50 posts
  • Location:In the man cave located somewhere dark in South West London!

  • Flag: England

  • Favorite Pinball: ATFM, MM, TAF, CV, SS, TFTC...

Posted 28 August 2012 - 10:36 AM

QUOTE (russdx @ Aug 28 2012, 01:40 AM) <{POST_SNAPBACK}>
really strange how some motherboards really don't like the fast frame transfer using the FTDI d2xx lib

it looks like using a separate psu for the DMD seams to be the best option smile.gif Noah sells a nice little one on his site smile.gif


Hehe I didn't expect a reply at that time of the morning Russ! You an insomniac like me?!

DMD has always been powered externally using an old PC PSU.

#1380 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 28 August 2012 - 11:43 AM

hehe got day off work smile.gif