Jump to content



Photo
* * * * * 2 votes

usb dot matrix driver board - who wants one?


  • Please log in to reply
1473 replies to this topic

#1341 PinKitty

PinKitty

    Enthusiast

  • Members
  • PipPipPip
  • 96 posts

  • Flag: United States of America

  • Favorite Pinball: High Roller Casino

Posted 10 August 2012 - 03:49 AM

I am not using an extension. I have used the same USB cable between both machines. I even went out and bought a better USB cable and got same results - one machine works , the other not.

Is there a joke with ASRock? Because the motherboard of my non-working cab pc is ASRock Z68 Extreme3 Gen 3.

I also noticed something in Hardware Device Manager on the non-working cab pc. In the device tree I have

? Other devices
l_ ?! PCI Simple Communications Controller

I don't have this unknown device in any of my other working pc's. Could this be having an adverse effect on the display signal from Visual Pinball table to the DMD?

#1342 Flying Dutchman

Flying Dutchman

    Pinball Wizard

  • VIP
  • 3,259 posts

  • Flag: ---------

  • Favorite Pinball: Medieval Madness / Champion Pub



Posted 10 August 2012 - 08:55 AM

Sorry if I missed out on this part but could anyone please tell/show me on how to hook up a DMD to a seperate 5V pc adapter or let me know on how to do it best?

Pics would be a great help! wink.gif

Cheers,
FD.

'Flying Dutchman'

In need for a Backglass or 'Active Backglass / UVP' please 'click' on below and visit the complete revised website at:
Posted Image

#1343 Noah Fentz

Noah Fentz

    'Rasslin' Fan

  • VPF Administrator
  • 12,283 posts
  • Location:South Lyon, MI

  • Flag: United States of America

  • Favorite Pinball: Whitewater

  • PS3 Gamer Tag: noahfentz


Contributor

Posted 10 August 2012 - 03:56 PM

QUOTE (PinKitty @ Aug 9 2012, 11:49 PM) <{POST_SNAPBACK}>
I am not using an extension. I have used the same USB cable between both machines. I even went out and bought a better USB cable and got same results - one machine works , the other not.

Is there a joke with ASRock? Because the motherboard of my non-working cab pc is ASRock Z68 Extreme3 Gen 3.

I also noticed something in Hardware Device Manager on the non-working cab pc. In the device tree I have

? Other devices
l_ ?! PCI Simple Communications Controller

I don't have this unknown device in any of my other working pc's. Could this be having an adverse effect on the display signal from Visual Pinball table to the DMD?


Hopefully, you still have the mobo's driver disk? It would be the Intel Management Engine Interface driver set. Install them, and you should be golden.

If you no longer have the disk, Google can help.

IdleReel.gif RumbleDMD.jpg HS2-DMD.jpg SBM.jpg ww_logo.jpg EK.jpg

 
T2.jpg Sorcerer.jpg Breakshot.jpg Firepower.jpg GorGar.jpg StarTrek.jpg


My Photobucket Resources
Whether You Believe You Can, Or You Can't, You Are Right." - Henry Ford
The future of pinball lives, it just needs to be nurtured!
If you're here to stab me in the back, you're going to have to get in line.


#1344 PinKitty

PinKitty

    Enthusiast

  • Members
  • PipPipPip
  • 96 posts

  • Flag: United States of America

  • Favorite Pinball: High Roller Casino

Posted 11 August 2012 - 11:17 PM

Thank You Noah Fentz (I got it right this time, haha facepalm.gif ),

I installed the Intel ME set for Windows XP from the ASRock website. Along with the Intel ME driver, it included a BIOS flash update, an AXTU driver, and a VGA driver. I then checked the device tree in Hardware Device Manager. There were no questionable devices. The "?Other Devices " went away.

So I started up a game in VP. The game played as expected. So then I hooked up the pinDMD board and display and relaunched the table. Yeah, the diplay worked...But then only a couple seconds later... it started blinking, then double imaging, then quadruple imaging, then scrambled to unrecognizable garble.

I'm back to square one. Any other ideas what is keeping VP from sending dmd signals through my pinDMD board?

#1345 Flying Dutchman

Flying Dutchman

    Pinball Wizard

  • VIP
  • 3,259 posts

  • Flag: ---------

  • Favorite Pinball: Medieval Madness / Champion Pub



Posted 12 August 2012 - 01:05 AM

QUOTE (Flying Dutchman @ Aug 10 2012, 10:55 AM) <{POST_SNAPBACK}>
Sorry if I missed out on this part but could anyone please tell/show me on how to hook up a DMD to a seperate 5V pc adapter or let me know on how to do it best?

Pics would be a great help! wink.gif

Cheers,
FD.


Thanks all for your help ..


'Flying Dutchman'

In need for a Backglass or 'Active Backglass / UVP' please 'click' on below and visit the complete revised website at:
Posted Image

#1346 Joe

Joe

    Pinball Wizard

  • VIP
  • 2,388 posts
  • Location:60016

  • Flag: United States of America

  • Favorite Pinball: New Stern ones

Posted 12 August 2012 - 02:21 AM

QUOTE (PinKitty @ Aug 9 2012, 10:49 PM) <{POST_SNAPBACK}>
I am not using an extension. I have used the same USB cable between both machines. I even went out and bought a better USB cable and got same results - one machine works , the other not.

Is there a joke with ASRock? Because the motherboard of my non-working cab pc is ASRock Z68 Extreme3 Gen 3.

I also noticed something in Hardware Device Manager on the non-working cab pc. In the device tree I have

? Other devices
l_ ?! PCI Simple Communications Controller

I don't have this unknown device in any of my other working pc's. Could this be having an adverse effect on the display signal from Visual Pinball table to the DMD?

dial up modem?

#1347 PinKitty

PinKitty

    Enthusiast

  • Members
  • PipPipPip
  • 96 posts

  • Flag: United States of America

  • Favorite Pinball: High Roller Casino

Posted 12 August 2012 - 02:33 AM

QUOTE (Joe @ Aug 11 2012, 04:21 PM) <{POST_SNAPBACK}>
QUOTE (PinKitty @ Aug 9 2012, 10:49 PM) <{POST_SNAPBACK}>
I am not using an extension. I have used the same USB cable between both machines. I even went out and bought a better USB cable and got same results - one machine works , the other not.

Is there a joke with ASRock? Because the motherboard of my non-working cab pc is ASRock Z68 Extreme3 Gen 3.

I also noticed something in Hardware Device Manager on the non-working cab pc. In the device tree I have

? Other devices
l_ ?! PCI Simple Communications Controller

I don't have this unknown device in any of my other working pc's. Could this be having an adverse effect on the display signal from Visual Pinball table to the DMD?

dial up modem?

I don't think so. I installed the Intel Management Engine driver set as Noah Fentz suggested and the questionable devices went away.

QUOTE (Flying Dutchman @ Aug 11 2012, 03:05 PM) <{POST_SNAPBACK}>
QUOTE (Flying Dutchman @ Aug 10 2012, 10:55 AM) <{POST_SNAPBACK}>
Sorry if I missed out on this part but could anyone please tell/show me on how to hook up a DMD to a seperate 5V pc adapter or let me know on how to do it best?

Pics would be a great help! wink.gif

Cheers,
FD.


Thanks all for your help ..

Hey Flying Dutchman, did you get your questions answered? I was waiting to see if anyone replied, because I was confused on what you are asking. What are you trying to power? The DMD or the pinDMD board?

#1348 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 12 August 2012 - 01:13 PM

@Flying Dutchman what type of DMD do you have?

@pinKitty so pinmame is sending the frames to the board but its sending it incorrectly? it sounds like its getting confused between 16colour mode and 4colour?

i would suggest re downloading the pinmame.dll from my site and installing it and re downloading the latest pinDMD firmware and installing it. just to be 100% sure every thing is in sync smile.gif

http://www.pindmd.co...me/VPinMAME.dll
http://www.pindmd.co...re/firmware.zip




quick note smile.gif

I only have 12 pinDMD's left and Noah has a few as well.
This product will be discontinued once all have been sold!

i am working on the next version but this is a while off!

www.pinDMD.com
www.virtuapin.net

#1349 PinKitty

PinKitty

    Enthusiast

  • Members
  • PipPipPip
  • 96 posts

  • Flag: United States of America

  • Favorite Pinball: High Roller Casino

Posted 12 August 2012 - 09:36 PM

Hey Russdx,
I downloaded the VPinMAME.dll and ran the setup.exe to reinstall it. Then I downloaded the pinDMD firmware. I installed the regular version first, and tried the pinDMD board. I got scrambled, mostly unrecognizable garble. Then I updated to the plasma version, and got the same result - scrambled, mostly unrecognizable garble.

Still scratching my head over this. think.gif What is it about THIS cab pc and VP that won't let the pinDMD display the DMD images correctly?

#1350 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 12 August 2012 - 10:08 PM

its so weird

can you take a video of the scrambled display? with the virtual dmd in view as well so i can compare smile.gif
maybe if i see it i can see what's going wrong smile.gif

#1351 PinKitty

PinKitty

    Enthusiast

  • Members
  • PipPipPip
  • 96 posts

  • Flag: United States of America

  • Favorite Pinball: High Roller Casino

Posted 13 August 2012 - 02:32 AM

I took video and sent to [email protected]. Hopefully they are good enough for you to get idea of what is going on.

#1352 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 13 August 2012 - 07:48 AM

wow that is completely screwed sad.gif, but its fine on another pc?

#1353 Flying Dutchman

Flying Dutchman

    Pinball Wizard

  • VIP
  • 3,259 posts

  • Flag: ---------

  • Favorite Pinball: Medieval Madness / Champion Pub



Posted 13 August 2012 - 08:29 PM

QUOTE (russdx @ Aug 12 2012, 03:13 PM) <{POST_SNAPBACK}>
@Flying Dutchman what type of DMD do you have?


It's a R20002 ..

'How to power up this type of DMD?'

Thanks russdx!

Cheers,
FD.

Edited by Flying Dutchman, 13 August 2012 - 08:29 PM.

'Flying Dutchman'

In need for a Backglass or 'Active Backglass / UVP' please 'click' on below and visit the complete revised website at:
Posted Image

#1354 PinKitty

PinKitty

    Enthusiast

  • Members
  • PipPipPip
  • 96 posts

  • Flag: United States of America

  • Favorite Pinball: High Roller Casino

Posted 13 August 2012 - 09:44 PM

Hey Russdx,
Yeah, it is screwed up. And yes, it works just fine on 3 other pcs - two Compaq running Windows XP Pro 2002 SP3 32-bit, and a Dell Inspiron running Vista 64-bit. I'm starting to point the blame on my ASRock motherboard.

#1355 kruge99

kruge99

    Pinball Wizard

  • VPF Staff
  • 3,901 posts
  • Location:Markham, Ont.

  • Flag: Canada

  • Favorite Pinball: Black Knight, High Speed and Pin*Bot



Posted 13 August 2012 - 10:33 PM

QUOTE (PinKitty @ Aug 13 2012, 05:44 PM) <{POST_SNAPBACK}>
Hey Russdx,
Yeah, it is screwed up. And yes, it works just fine on 3 other pcs - two Compaq running Windows XP Pro 2002 SP3 32-bit, and a Dell Inspiron running Vista 64-bit. I'm starting to point the blame on my ASRock motherboard.


... two things I recall can mess up USB timing - one is a "bad" or noisy power plane on the motherboard itself, the second is perhaps the power supply. If you have a second PC, temporarily borrow the power supply out of it and see if that fixes the DMD display on the ASRock board.

If not, it could be the ASRock board is either defective or the quality is poor.

I'm no 100% sure, but that would be my guess.


Best Regards,
Todd.

[proud owner of a Williams Solar Fire]

- It's called "The American Dream" because you have to be asleep to believe it.
George Carlin
- Truly great madness cannot be achieved without significant intelligence.
Henrik Tikkanen
- "Reality check, Michelle, Talk about composure, Total lack of. He's a man-- About-- 12 Feet Tall--"
Carrie Kelly
Posted Image

#1356 Arkay

Arkay

    Hobbyist

  • Members
  • PipPip
  • 35 posts

  • Flag: Australia

  • Favorite Pinball: Terminator 2, Addams Family, Meteor, Pharoah

Posted 14 August 2012 - 06:42 AM

Can't remember if you tired this or not but what about buying a cheap USB expansion card to put in a PCI slot? It's got to be the motherboards USB implementation that causes it.....
the card should have it's own USB drivers which might rule out the motherboard USB.

Though to be honest by now I'd have just swapped the motherboard out for one that does work. Keep the current board for a desktop or something later on.

Cheers,

Arkay.

Edited by Arkay, 14 August 2012 - 06:44 AM.


#1357 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 14 August 2012 - 01:01 PM

what really confuses me is that pinKitty can program the pinDMD on this pc. so the usb/ftdi must be working correctly for this to work. but the second you try and write dmd frame data to it, it gets all upset. its very strange.

pci usb board would be best bet i think!! also be interesting to know if this solves the problem




@Flying Dutchman

if you take a picture of the connector ill label how you connect it up smile.gif





#1358 Arkay

Arkay

    Hobbyist

  • Members
  • PipPip
  • 35 posts

  • Flag: Australia

  • Favorite Pinball: Terminator 2, Addams Family, Meteor, Pharoah

Posted 15 August 2012 - 03:31 AM

Russ,

I'll bet it has something to do with the USB transfer rate. Writing the firmware probably isn't rate sensitive. It'll get there where it gets there and the software will flash it when completely received. Frame data on the other hand is a different animal.

I know from when I was messing with pinmame sent framedata and the firmware via a windows vm (under Linux) I got completely different results to a native install of windows/pinmame on my cab machine. Technically USB is a passthrough device in the vm so it shouldn't matter but the rate changed dramatically between the two to where I had a perfectly working DMD on the vm and garbage on the native machine (as I had the code artificially waiting a set number of milliseconds based on how quick the framedata was received in order to smooth the animation) the native USB was so much faster than the vm that it caused all sort of weird artifiacts.

I'd say USB transfer speed might be the cause of it working on everything but this one motherboard which is why I suggested a USB card.

PinKitty, if you buy a USB PCI card, make sure it has a completely different chipset to your motherboard USB implementation. Should be able to get the info from control panel. Otherwise you could end up with the same drivers running the external card and potentially (though unlikely), the same issues.

Cheers,

Arkay.

Edited by Arkay, 15 August 2012 - 03:37 AM.


#1359 PinKitty

PinKitty

    Enthusiast

  • Members
  • PipPipPip
  • 96 posts

  • Flag: United States of America

  • Favorite Pinball: High Roller Casino

Posted 15 August 2012 - 06:16 AM

Thanks everyone for the input. I didn't see the latest post by Arkay until after I bought a plug & play PCI USB 2.0 Adapter Card. I installed the card and plugged in the pinDMD board. Bummer, I got the same garbled signal on the display when I plugged the pinDMD board into one of the USB ports on the card.

To make sure I understand correctly, since this was a plug & play card, is it using the same USB drivers that the motherboard is running? Would the USB card need to come with it's own set of drivers on a DVD that would need to be installed for it to work? I guess I'm not really sure how to tell the chipset on the adapter card, and the chipset on the motherboard, and how to know if they are different. Where on control panel do I go?

#1360 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 15 August 2012 - 08:44 AM

that makes sense Arkay, USB is meant to be a standard. how can one motherboard implement it so different it stops working? that's crazy.

maybe i should make a Ethernet pinDMD that just plugs into your router / use a cross over cable hehe