391 replies to this topic

[Outhere]

I wouldn't think so
Maybe you should remove the R3 and re-down load and put it back on....
Is this the one you're using

http://www.vpforums....=10#entry376124

Edited by Outhere, 03 October 2017 - 12:59 AM.

[bjschneider93]

I was using the one from another site, I just downloaded the one you linked to

[bjschneider93]

Doesn’t seem to have made difference

[DDH69]

Have you tried the Cat6 RJ45 in both sockets?  Only one of them is correct, one controls outputs 1-4 and the other 5-8, so there are two possibilities for orange & orange / white.

[bjschneider93]

Yes. Tried that and every twisted pair on the cable


Sent from my iPhone using Tapatalk

[Outhere]

Go in your GlobalConfig_B2SServer.xml file, change Items in red
Then try running, post your log...

 

 

GLOBAL

<?xml version="1.0" encoding="utf-8"?>

<!--Global configuration for the DirectOutput framework.-->

<!--Saved by DirectOutput Version 0.9.5764.18938: 2017-10-01 10-02-47-->

<GlobalConfig>

  <LedWizDefaultMinCommandIntervalMs>1</LedWizDefaultMinCommandIntervalMs>

  <LedControlMinimumEffectDurationMs>60</LedControlMinimumEffectDurationMs>

  <LedControlMinimumRGBEffectDurationMs>120</LedControlMinimumRGBEffectDurationMs>

  <IniFilesPath>C:\Directoutput\config</IniFilesPath>

  <ShapeDefintionFilePattern>{DllDir}\DirectOutputShapes.xml</ShapeDefintionFilePattern>

  <CabinetConfigFilePattern>C:\Directoutput\config\cabinet.xml</CabinetConfigFilePattern>

  <TableConfigFilePatterns />

  <EnableLogging>true</EnableLogging>

  <ClearLogOnSessionStart>true</ClearLogOnSessionStart>

  <LogFilePattern>C:\Directoutput\DirectOutput.log</LogFilePattern>

</GlobalConfig>

Edited by Outhere, 03 October 2017 - 02:18 PM.

[bjschneider93]

Ok. Thanks. Will try after work tonight


Sent from my iPhone using Tapatalk

[bjschneider93]

2017.10.03 19:27:43.868 DirectOutput Logger initialized

2017.10.03 19:27:43.869 DirectOutput Version 0.9.5812.27024 as of 2015.11.30 15:00

2017.10.03 19:27:43.869 Global config loaded from: C:\DIRECTOUTPUT\config\GlobalConfig_B2SServer.xml

2017.10.03 19:27:43.869 Loading Pinball parts

2017.10.03 19:27:43.869 Loading cabinet

2017.10.03 19:27:43.870 No cabinet config file loaded. Will use AutoConfig.

2017.10.03 19:27:43.870 Cabinet auto configuration started

2017.10.03 19:27:43.891 Debug: Ledwiz devicelist content. Handles: 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, Num devices: 0

2017.10.03 19:27:43.892 Debug: Disposing LedWiz instance -01.

2017.10.03 19:27:43.892 Cabinet auto configuration finished

2017.10.03 19:27:43.892 Cabinet loaded

2017.10.03 19:27:43.892 Loading table config

2017.10.03 19:27:43.893 Warning: No table config file found. Will try to load config from LedControl file(s).

2017.10.03 19:27:43.893 Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName afm_113b

2017.10.03 19:27:43.894 Loading LedControl file C:\Directoutput\config\directoutputconfig30.ini

2017.10.03 19:27:44.031 1 directoutputconfig.ini or ledcontrol.ini files loaded.

2017.10.03 19:27:44.032 Config for RomName afm_113b exists in LedControl data. Updating cabinet and config.

2017.10.03 19:27:44.040 Table config loading finished

2017.10.03 19:27:44.040 Pinball parts loaded

2017.10.03 19:27:44.041 Starting processes

2017.10.03 19:27:44.041 Initializing cabinet

2017.10.03 19:27:44.041 Debug: Initializing output controllers

2017.10.03 19:27:44.041 Debug: Output controllers initialized

2017.10.03 19:27:44.041 Cabinet initialized

2017.10.03 19:27:44.042 Loading shape definition file: C:\DIRECTOUTPUT\DirectOutputShapes.xml

2017.10.03 19:27:44.241 Framework initialized.

2017.10.03 19:27:44.241 Have fun!

2017.10.03 19:28:15.887 Finishing framework

2017.10.03 19:28:15.888 Finishing cabinet

2017.10.03 19:28:15.889 Debug: Finishing output controllers

2017.10.03 19:28:15.889 Debug: Output controllers finished

2017.10.03 19:28:15.889 Cabinet finished

2017.10.03 19:28:15.889 DirectOutput framework finished.

2017.10.03 19:28:15.889 Bye and thanks for using!

[Outhere]

it looks like it's not loading your cabinet file..

Make it so Windows shows the file extensions on all files and send post a new picture of your config folder

[bjschneider93]

Sent from my iPhone using Tapatalk

[bjschneider93]

I just noticed my cabinet file is missing. I found it. Will post the log file again

---------------------------------------------------------------------------------

2017.10.03 21:46:17.802 DirectOutput Logger initialized

2017.10.03 21:46:17.802 DirectOutput Version 0.9.5812.27024 as of 2015.11.30 15:00

2017.10.03 21:46:17.803 Global config loaded from: C:\DIRECTOUTPUT\config\GlobalConfig_B2SServer.xml

2017.10.03 21:46:17.803 Loading Pinball parts

2017.10.03 21:46:17.803 Loading cabinet

2017.10.03 21:46:17.803 Will load cabinet config file: C:\Directoutput\config\cabinet.xml

2017.10.03 21:46:17.811 EXCEPTION: Could not load cabinet config from XML data.

2017.10.03 21:46:17.812 EXCEPTION: Thread: 

2017.10.03 21:46:17.812 EXCEPTION: Message: Exception --> Could not deserialize the cabinet config from XML data.

2017.10.03 21:46:17.812 EXCEPTION: A exception occured when loading cabinet config file: C:\Directoutput\config\cabinet.xml

2017.10.03 21:46:17.812 EXCEPTION: Thread: 

2017.10.03 21:46:17.812 EXCEPTION: Message: NullReferenceException --> Object reference not set to an instance of an object.

2017.10.03 21:46:17.813 EXCEPTION: Stacktrace:    at DirectOutput.Log.Exception(String Message, Exception E)

2017.10.03 21:46:17.813 EXCEPTION: Stacktrace:    at DirectOutput.Cab.Cabinet.GetCabinetFromConfigXml(String ConfigXml)

2017.10.03 21:46:17.813 EXCEPTION: Stacktrace:    at DirectOutput.Cab.Cabinet.GetCabinetFromConfigXmlFile(String FileName)

2017.10.03 21:46:17.813 EXCEPTION: Stacktrace:    at DirectOutput.Cab.Cabinet.GetCabinetFromConfigXmlFile(FileInfo CabinetConfigFile)

2017.10.03 21:46:17.813 EXCEPTION: Stacktrace:    at DirectOutput.Pinball.Setup(String GlobalConfigFilename, String TableFilename, String RomName)

2017.10.03 21:46:17.813 EXCEPTION: Targetsite: Void Exception(System.String, System.Exception)

2017.10.03 21:46:17.813 No cabinet config file loaded. Will use AutoConfig.

2017.10.03 21:46:17.814 Cabinet auto configuration started

2017.10.03 21:46:17.835 Debug: Ledwiz devicelist content. Handles: 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, Num devices: 0

2017.10.03 21:46:17.836 Debug: Disposing LedWiz instance -01.

2017.10.03 21:46:17.837 Cabinet auto configuration finished

2017.10.03 21:46:17.837 Cabinet loaded

2017.10.03 21:46:17.837 Loading table config

2017.10.03 21:46:17.837 Warning: No table config file found. Will try to load config from LedControl file(s).

2017.10.03 21:46:17.837 Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName afm_113b

2017.10.03 21:46:17.838 Loading LedControl file C:\Directoutput\config\directoutputconfig30.ini

2017.10.03 21:46:17.971 1 directoutputconfig.ini or ledcontrol.ini files loaded.

2017.10.03 21:46:17.972 Config for RomName afm_113b exists in LedControl data. Updating cabinet and config.

2017.10.03 21:46:17.979 Table config loading finished

2017.10.03 21:46:17.980 Pinball parts loaded

2017.10.03 21:46:17.980 Starting processes

2017.10.03 21:46:17.980 Initializing cabinet

2017.10.03 21:46:17.980 Debug: Initializing output controllers

2017.10.03 21:46:17.980 Debug: Output controllers initialized

2017.10.03 21:46:17.980 Cabinet initialized

2017.10.03 21:46:17.981 Loading shape definition file: C:\DIRECTOUTPUT\DirectOutputShapes.xml

2017.10.03 21:46:18.006 Framework initialized.

2017.10.03 21:46:18.006 Have fun!

2017.10.03 21:46:57.124 Finishing framework

2017.10.03 21:46:57.125 Finishing cabinet

2017.10.03 21:46:57.125 Debug: Finishing output controllers

2017.10.03 21:46:57.125 Debug: Output controllers finished

2017.10.03 21:46:57.125 Cabinet finished

2017.10.03 21:46:57.125 DirectOutput framework finished.

2017.10.03 21:46:57.125 Bye and thanks for using!

[bjschneider93]

Sent from my iPhone using Tapatalk

[bjschneider93]

I think I may have to take some time next week and completely start over with the LED’s

[slashbot]

Do i need to connect the ground wire from power supply to the teensy board or just leave it?

Sent from my SM-G935U using Tapatalk

[bjschneider93]

Shouldn’t need to connect it


Sent from my iPhone using Tapatalk

[Outhere]

Do i need to connect the ground wire from power supply to the teensy board?  -- No

Edited by Outhere, 07 October 2017 - 12:07 PM.

[bjschneider93]

Ok, so after uninstalling and reinstalling DOF R3, Arduino and Teensyduino I finally have  1 strip of LEDs working for the right half of the playfield but for the life of me I can't get a strip working for the back or the left

[Outhere]

It's good to see you're getting somewhere...

Have you tried hooking up the wires from the right to the lights on the left to make sure the lights are good

[bjschneider93]

Yes. Lights are good. This whole process seems to be giving me more problems than it should

[Outhere]

Post your GlobalConfig_B2SServer.xml  -- Cabinet.xml  --- DirectOutput.log