Jump to content



Photo
* * * * * 2 votes

pinDMD-2 development :)


  • Please log in to reply
838 replies to this topic

#821 The Loafer

The Loafer

    Pinball Wizard

  • VIP
  • 3,472 posts
  • Location:Embrun, Ontario, Canada

  • Flag: ---------

  • Favorite Pinball: Superman, Firepower & Tron



Posted 14 November 2014 - 11:36 AM

Can't answer your question right now but wanted to chime in that I am glad you stuck with it and got it working Todd! Well done and thanks to all who helped!

#822 zebulon

zebulon

    Cantankerous old B****D

  • Platinum Supporter
  • 1,179 posts
  • Location:Whitby, Ontario, Canada

  • Flag: Canada

  • Favorite Pinball: xenon, Medieval Madness, Royal Flush, Silverball Mania

Posted 14 November 2014 - 01:02 PM

Glad it's up and running Todd!!

 

Disabling legacy support would probably have solved the issue as well but it would mean reverting to a PS/2 keyboard if you ever needed into the BIOS.  What you've done is likely the best solution as it allows you to stick with the usb keyboard.

 

I have a customer that has a similar issue with my controller and we've been using the legacy disabled option for a temporary solution.  I'll have to get him to give this a try and see if it solves the issue.  Thanks for posting your solution!!


 ZB%20%20Storefront1%20.png               [email protected]

Don't pm or expect an answer from me here ... the links above are my contacts.

I know so much about so little that I could teach you all there is to know about nothing......


#823 kruge99

kruge99

    Pinball Wizard

  • VPF Staff
  • 3,901 posts
  • Location:Markham, Ont.

  • Flag: Canada

  • Favorite Pinball: Black Knight, High Speed and Pin*Bot



Posted 14 November 2014 - 01:27 PM

Glad it's up and running Todd!!

 

Disabling legacy support would probably have solved the issue as well but it would mean reverting to a PS/2 keyboard if you ever needed into the BIOS.  What you've done is likely the best solution as it allows you to stick with the usb keyboard.

 

I have a customer that has a similar issue with my controller and we've been using the legacy disabled option for a temporary solution.  I'll have to get him to give this a try and see if it solves the issue.  Thanks for posting your solution!!

 

All I know is that, on my system at least, waiting +20 minutes while Windows re-loads a whole bunch of drivers was pretty nerve wracking, some drivers had to be downloaded from Windows update as well  I was sure my system registry would be toast, but it seems to be OK for now.  Keep those driver disks handy just in case Windows can't find the proper driver on the internet!


[proud owner of a Williams Solar Fire]

- It's called "The American Dream" because you have to be asleep to believe it.
George Carlin
- Truly great madness cannot be achieved without significant intelligence.
Henrik Tikkanen
- "Reality check, Michelle, Talk about composure, Total lack of. He's a man-- About-- 12 Feet Tall--"
Carrie Kelly
Posted Image

#824 kruge99

kruge99

    Pinball Wizard

  • VPF Staff
  • 3,901 posts
  • Location:Markham, Ont.

  • Flag: Canada

  • Favorite Pinball: Black Knight, High Speed and Pin*Bot



Posted 14 November 2014 - 01:38 PM

Well I found my old pincab logo on my hard drive, but I don't know where to put it so that the pinDMD2 will load the logo.  I don't have a pincab any longer so I am playing desktop VP tables only.  Do I have to setup a Hyperpin directory?

 

I did some googling and I found this post by Russ on the Hyperpin forums:

 

 

iv made it so the logo is now stored in a .txt file you place in your tables folder smile.png no firmware upgrading needed smile.png pinmame.dll will look for that txt file in between games and use that as the logo smile.pngalso looking into having the dmd scroll through table names / manu logos smile.png

 

 

Can anyone check their pincab and let me know if it's as simple as putting dmdlogo.txt into the visual pinball tables folder.  Something like this C:\GAMES\Visual Pinball\Tables

 

Thanks!!


[proud owner of a Williams Solar Fire]

- It's called "The American Dream" because you have to be asleep to believe it.
George Carlin
- Truly great madness cannot be achieved without significant intelligence.
Henrik Tikkanen
- "Reality check, Michelle, Talk about composure, Total lack of. He's a man-- About-- 12 Feet Tall--"
Carrie Kelly
Posted Image

#825 kruge99

kruge99

    Pinball Wizard

  • VPF Staff
  • 3,901 posts
  • Location:Markham, Ont.

  • Flag: Canada

  • Favorite Pinball: Black Knight, High Speed and Pin*Bot



Posted 14 November 2014 - 11:30 PM

 

Well I found my old pincab logo on my hard drive, but I don't know where to put it so that the pinDMD2 will load the logo.  I don't have a pincab any longer so I am playing desktop VP tables only.  Do I have to setup a Hyperpin directory?

 

I did some googling and I found this post by Russ on the Hyperpin forums:

 

 

iv made it so the logo is now stored in a .txt file you place in your tables folder smile.png no firmware upgrading needed smile.png pinmame.dll will look for that txt file in between games and use that as the logo smile.pngalso looking into having the dmd scroll through table names / manu logos smile.png

 

 

Can anyone check their pincab and let me know if it's as simple as putting dmdlogo.txt into the visual pinball tables folder.  Something like this C:\GAMES\Visual Pinball\Tables

 

Thanks!!

 

 

nope, this doesn't seem to work on pinDMD2.  Any other suggestions?  Kinda would like to see it lit up with something at least!! :D

 

Thanks again for all the help.  Time to play some more Blackout! (and mebbe some High Speed too...)


[proud owner of a Williams Solar Fire]

- It's called "The American Dream" because you have to be asleep to believe it.
George Carlin
- Truly great madness cannot be achieved without significant intelligence.
Henrik Tikkanen
- "Reality check, Michelle, Talk about composure, Total lack of. He's a man-- About-- 12 Feet Tall--"
Carrie Kelly
Posted Image

#826 kruge99

kruge99

    Pinball Wizard

  • VPF Staff
  • 3,901 posts
  • Location:Markham, Ont.

  • Flag: Canada

  • Favorite Pinball: Black Knight, High Speed and Pin*Bot



Posted 15 November 2014 - 12:22 AM

 

 

Well I found my old pincab logo on my hard drive, but I don't know where to put it so that the pinDMD2 will load the logo.  I don't have a pincab any longer so I am playing desktop VP tables only.  Do I have to setup a Hyperpin directory?

 

I did some googling and I found this post by Russ on the Hyperpin forums:

 

 

iv made it so the logo is now stored in a .txt file you place in your tables folder smile.png no firmware upgrading needed smile.png pinmame.dll will look for that txt file in between games and use that as the logo smile.pngalso looking into having the dmd scroll through table names / manu logos smile.png

 

 

Can anyone check their pincab and let me know if it's as simple as putting dmdlogo.txt into the visual pinball tables folder.  Something like this C:\GAMES\Visual Pinball\Tables

 

Thanks!!

 

 

nope, this doesn't seem to work on pinDMD2.  Any other suggestions?  Kinda would like to see it lit up with something at least!! :D

 

Thanks again for all the help.  Time to play some more Blackout! (and mebbe some High Speed too...)

 

 

OK - I'm shutting up now.  It does work.  My bad.

 

/facepalm

 

(I have multiple 'Tables' folders and I had to put my dmdlogo.txt into each one)    :-(


[proud owner of a Williams Solar Fire]

- It's called "The American Dream" because you have to be asleep to believe it.
George Carlin
- Truly great madness cannot be achieved without significant intelligence.
Henrik Tikkanen
- "Reality check, Michelle, Talk about composure, Total lack of. He's a man-- About-- 12 Feet Tall--"
Carrie Kelly
Posted Image

#827 jangus

jangus

    Enthusiast

  • Members
  • PipPipPip
  • 59 posts

  • Flag: Sweden

  • Favorite Pinball: Taxi

Posted 18 February 2015 - 09:49 AM

I bought a pinDMD2 and it where not recognized by any USB port on 2 different computers.

I then send the pinDMD2 back and got a new one that is detected as a non identified USB. When I try to update the driver with the one downloaded from pinDMD.com I get an error message telling me that the there are no 64-bit compatible driver in the folder.

 

I have read that the pinDMD does not always like USB 3.0. I have it connected to USB 2.0.

I have also read that some people buy USB 2.0 PCI-E card and have got it to work. I wonder if that would fix the problem with Windows 7 not detecting the driver as a valid 64-bit driver?

My Windows 7 never pop up any information about the driver not being properly signed. So I guess that could not be the problem either.

 

The first pinDMD2 that where not at all detected by the computer(s) had a yellow LED that is continuously lit and a red that flashed in periods of 5 (1 flash per second)  flashes an then a delay. The DMD had a flashing text "DMD.COM" (if I remember correctly)

The second pinDMD2 (that I have now) has a yellow LED that is continuously lit and a red that flashed continuously and fast.



#828 gregh43

gregh43

    Hobbyist

  • Members
  • PipPip
  • 49 posts
  • Location:Bismarck,North Dakota

  • Flag: United States of America

  • Favorite Pinball: Guns N Roses

Posted 20 March 2016 - 05:57 AM

I have a PinDmd2 cant figure out how to
change colors on the display. any help
is greatly appreciated Thanks

#829 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 22 March 2016 - 01:17 PM

pinDMD2 only drives monochrome displays. Which colours are you trying to change?



#830 gregh43

gregh43

    Hobbyist

  • Members
  • PipPip
  • 49 posts
  • Location:Bismarck,North Dakota

  • Flag: United States of America

  • Favorite Pinball: Guns N Roses

Posted 25 March 2016 - 02:52 AM

https://youtu.be/nhdYtULhGTc

like to change the standard orange to blue
or red. and how to colorize. like in the clip.
or do I need the PinDmdv3 to do this??
thanks

#831 gregh43

gregh43

    Hobbyist

  • Members
  • PipPip
  • 49 posts
  • Location:Bismarck,North Dakota

  • Flag: United States of America

  • Favorite Pinball: Guns N Roses

Posted 25 March 2016 - 04:19 AM

https://youtu.be/nhdYtULhGTc

like to change the standard orange display to red or blue.
and colorize the display like in the video. I thought
the PinDmd2 did colors? thanks

#832 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 25 March 2016 - 08:52 AM

You need the pindmd3 for colour support as it comes with the rgb display modules.

Pindmd2 only drives monochrome pinball displays.

#833 gregh43

gregh43

    Hobbyist

  • Members
  • PipPip
  • 49 posts
  • Location:Bismarck,North Dakota

  • Flag: United States of America

  • Favorite Pinball: Guns N Roses

Posted 25 March 2016 - 05:33 PM

Thanks for the info. I'll upgrade to PinDmd 3

#834 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 25 March 2016 - 06:27 PM

No worries

#835 nebrunner

nebrunner

    Enthusiast

  • Platinum Supporter
  • 259 posts
  • Location:Omaha

  • Flag: ---------

  • Favorite Pinball: BIG GUNS!!!

Posted 31 March 2016 - 03:19 PM

I received pinDMD 3 yesterday.  It didn't arrive with cables but it looks like there are 4 possible connection points on the rear of the board.  2x ribbon, 1 molex, 1 usb.  My guess is I'm connecting molex to pc power, use a standard USB to connect to pc and ignore the two ribbon cables as they are probably used to link more LCD panels in series.  If this sounds correct please let me know.  Thank you!



#836 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 31 March 2016 - 03:27 PM

Ignore the ribbon cable socket this is used to daisy chain more modules together.

Usb goes to the computer (its how the board receives its frame data).

Plug a standard 4pin molex connector (found on your pc psu) into the 4pin Molex (this is the boards power supply).



#837 nebrunner

nebrunner

    Enthusiast

  • Platinum Supporter
  • 259 posts
  • Location:Omaha

  • Flag: ---------

  • Favorite Pinball: BIG GUNS!!!

Posted 31 March 2016 - 03:44 PM

Thank you.  Nice work on these by the way.  I love how the two panels butt up to each other and you can't even see the seam.  It is also nice that it is a direct drop in replacement with identical mounting holes.  How big a concern is overheating on this?  I will be placing it directly behind a plexi front but the back will be open to the upper box and there is a fan almost right behind the panel.



#838 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 31 March 2016 - 04:01 PM

Thanks :)

They dont get that hot at all.  Little 20ma LEDs like these run very cool. So no concern over heat.



#839 Arcade4

Arcade4

    Pinball Fan

  • Members
  • PipPipPipPip
  • 1,686 posts
  • Location:Beaumont, TX.

  • Flag: United States of America

  • Favorite Pinball: AC/DC

Posted 20 March 2017 - 05:33 AM

Bringing back an old thread here. :)

I just recently upgraded to VPX using the universal installer.

During the install I checked the box for PinDMD2 and it finished it's installation.

I have noticed that my System 11 Games play great on the DMD, but all of my 90's DMD games with animations make the display flicker like crazy.

Is there an easy way to solve this issue?