Jump to content



Photo
* * * * * 2 votes

pinDMD-2 development :)


  • Please log in to reply
838 replies to this topic

#801 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 12 November 2014 - 08:37 AM

Lol a simple £5 pci usb card will fix the problem it has in every case of this :) no need to chuck money at it just a 5er :P

No not dyopp21 I can't fix the issue without one :(

#802 kruge99

kruge99

    Pinball Wizard

  • VPF Staff
  • 3,901 posts
  • Location:Markham, Ont.

  • Flag: Canada

  • Favorite Pinball: Black Knight, High Speed and Pin*Bot



Posted 12 November 2014 - 10:31 AM

Lol a simple £5 pci usb card will fix the problem it has in every case of this :) no need to chuck money at it just a 5er :P

No not dyopp21 I can't fix the issue without one :(

 

Sorry Russ, I should have been more clear, that latest pic is with a new USB card installed.  Like I said, it's NOT your fault.  Karma must be paying me back for something I did.


[proud owner of a Williams Solar Fire]

- It's called "The American Dream" because you have to be asleep to believe it.
George Carlin
- Truly great madness cannot be achieved without significant intelligence.
Henrik Tikkanen
- "Reality check, Michelle, Talk about composure, Total lack of. He's a man-- About-- 12 Feet Tall--"
Carrie Kelly
Posted Image

#803 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 12 November 2014 - 10:40 AM

Wow even that does not work lol? I can only advise to use one of the mentioned cards in my previous post as they are 100% known working cards and are very cheap! :)

 

Yeah you have hit pretty much every stumbling block there is when installing pinDMD2 have been very unlucky :(


Edited by russdx, 12 November 2014 - 10:41 AM.


#804 zebulon

zebulon

    Cantankerous old B****D

  • Platinum Supporter
  • 1,179 posts
  • Location:Whitby, Ontario, Canada

  • Flag: Canada

  • Favorite Pinball: xenon, Medieval Madness, Royal Flush, Silverball Mania

Posted 12 November 2014 - 12:35 PM

Try going into the BIOS and disabling the USB 3.0 option.


 ZB%20%20Storefront1%20.png               [email protected]

Don't pm or expect an answer from me here ... the links above are my contacts.

I know so much about so little that I could teach you all there is to know about nothing......


#805 kruge99

kruge99

    Pinball Wizard

  • VPF Staff
  • 3,901 posts
  • Location:Markham, Ont.

  • Flag: Canada

  • Favorite Pinball: Black Knight, High Speed and Pin*Bot



Posted 12 November 2014 - 12:41 PM

Wow even that does not work lol? I can only advise to use one of the mentioned cards in my previous post as they are 100% known working cards and are very cheap! :)

 

Yeah you have hit pretty much every stumbling block there is when installing pinDMD2 have been very unlucky :(

 

I know Russ, I'm a PC hardware guy by nature and I really have no hard feelings towards you so please don't take my comments personally.

 

@Zebulon - I may have already tried to disable USB 3.0 in the bios to resolve an external USB HDD issue but thanks for suggesting that so I'll double/triple check that setting tonight.


[proud owner of a Williams Solar Fire]

- It's called "The American Dream" because you have to be asleep to believe it.
George Carlin
- Truly great madness cannot be achieved without significant intelligence.
Henrik Tikkanen
- "Reality check, Michelle, Talk about composure, Total lack of. He's a man-- About-- 12 Feet Tall--"
Carrie Kelly
Posted Image

#806 kruge99

kruge99

    Pinball Wizard

  • VPF Staff
  • 3,901 posts
  • Location:Markham, Ont.

  • Flag: Canada

  • Favorite Pinball: Black Knight, High Speed and Pin*Bot



Posted 12 November 2014 - 11:35 PM

 

Wow even that does not work lol? I can only advise to use one of the mentioned cards in my previous post as they are 100% known working cards and are very cheap! :)

 

Yeah you have hit pretty much every stumbling block there is when installing pinDMD2 have been very unlucky :(

 

I know Russ, I'm a PC hardware guy by nature and I really have no hard feelings towards you so please don't take my comments personally.

 

@Zebulon - I may have already tried to disable USB 3.0 in the bios to resolve an external USB HDD issue but thanks for suggesting that so I'll double/triple check that setting tonight.

 

 

@Zebulon - now I remember - the previous motherboard I owned had a defective USB 3.0/USB 2.0 (blown out by a surge or brown-out perhaps) and this motherboard is the replacement.  Sadly, it works fine with my external USB HDD but doesn't have a bios setting to disable USB 3.0

 

I guess this means going back to my pinDMD1 for now.


[proud owner of a Williams Solar Fire]

- It's called "The American Dream" because you have to be asleep to believe it.
George Carlin
- Truly great madness cannot be achieved without significant intelligence.
Henrik Tikkanen
- "Reality check, Michelle, Talk about composure, Total lack of. He's a man-- About-- 12 Feet Tall--"
Carrie Kelly
Posted Image

#807 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 13 November 2014 - 07:46 AM

Can u get one of the known working pci usb cards this wouldn't definitely work as motherboard does not matter at this stage

#808 kruge99

kruge99

    Pinball Wizard

  • VPF Staff
  • 3,901 posts
  • Location:Markham, Ont.

  • Flag: Canada

  • Favorite Pinball: Black Knight, High Speed and Pin*Bot



Posted 13 November 2014 - 10:28 AM

Can u get one of the known working pci usb cards this wouldn't definitely work as motherboard does not matter at this stage

 

Since I don't have any PCI slots, I'll have to find the PCI Express card you recommended

 

http://www.rocketfis.../RF-P2USB3.html

 

They don't seem to have them readily available in Canada though.

 

Keeping on with what Zebulon said about disabling USB 3.0, there is a setting called Intel xHCI which I think is disabled by default in my BIOS which might need to be enabled.  Anyone know what Intel xHCI does for USB stuff?


Edited by kruge99, 13 November 2014 - 10:30 AM.

[proud owner of a Williams Solar Fire]

- It's called "The American Dream" because you have to be asleep to believe it.
George Carlin
- Truly great madness cannot be achieved without significant intelligence.
Henrik Tikkanen
- "Reality check, Michelle, Talk about composure, Total lack of. He's a man-- About-- 12 Feet Tall--"
Carrie Kelly
Posted Image

#809 bosvrucht

bosvrucht

    Enthusiast

  • Members
  • PipPipPip
  • 410 posts

  • Flag: Netherlands

  • Favorite Pinball: LOTR

Posted 13 November 2014 - 12:08 PM

new motherboards no longer have pci interfaces, so users will have to buy pci express cards, which are more expensive. cheapest one here is about 14 euro without shipping.

 

It would be nice to have a longer compatibility list. So people dont end up with 100 bucks worth of usb expansion cards.


Edited by bosvrucht, 13 November 2014 - 12:08 PM.


#810 zebulon

zebulon

    Cantankerous old B****D

  • Platinum Supporter
  • 1,179 posts
  • Location:Whitby, Ontario, Canada

  • Flag: Canada

  • Favorite Pinball: xenon, Medieval Madness, Royal Flush, Silverball Mania

Posted 13 November 2014 - 01:18 PM

taken from here: http://www.intel.com...e-usb-xhci.html

 

 

The eXtensible Host Controller Interface (xHCI) specification describes the register-level host controller interface for universal serial bus revision 2.0 (USB2) and above. The specification includes a description of the hardware/software interface between system software and the host controller hardware.

 

From the sounds of it you might want to turn that on.....otherwise the USB port is likely running at USB1.0

 

Be aware that many have had issues with the intel driver for the bus....


 ZB%20%20Storefront1%20.png               [email protected]

Don't pm or expect an answer from me here ... the links above are my contacts.

I know so much about so little that I could teach you all there is to know about nothing......


#811 kruge99

kruge99

    Pinball Wizard

  • VPF Staff
  • 3,901 posts
  • Location:Markham, Ont.

  • Flag: Canada

  • Favorite Pinball: Black Knight, High Speed and Pin*Bot



Posted 13 November 2014 - 02:22 PM

taken from here: http://www.intel.com...e-usb-xhci.html

 

 

The eXtensible Host Controller Interface (xHCI) specification describes the register-level host controller interface for universal serial bus revision 2.0 (USB2) and above. The specification includes a description of the hardware/software interface between system software and the host controller hardware.

 

From the sounds of it you might want to turn that on.....otherwise the USB port is likely running at USB1.0

 

Be aware that many have had issues with the intel driver for the bus....

My BIOS has Intel xHCI currently set to "Smart Auto" and Legacy USB is enabled and I think the third one is EHCI is disabled.  I guess tonight I'll be experimenting - better save a restore point before I mess around with these settings.


[proud owner of a Williams Solar Fire]

- It's called "The American Dream" because you have to be asleep to believe it.
George Carlin
- Truly great madness cannot be achieved without significant intelligence.
Henrik Tikkanen
- "Reality check, Michelle, Talk about composure, Total lack of. He's a man-- About-- 12 Feet Tall--"
Carrie Kelly
Posted Image

#812 zebulon

zebulon

    Cantankerous old B****D

  • Platinum Supporter
  • 1,179 posts
  • Location:Whitby, Ontario, Canada

  • Flag: Canada

  • Favorite Pinball: xenon, Medieval Madness, Royal Flush, Silverball Mania

Posted 13 November 2014 - 05:20 PM

yeah....I don't know.

 

I have issues with the words "smart" "auto" and "Intel" in the same sentence.  It's like having "Linux" and "intuitive" or "Microsoft" and "support" anywhere near each other....no good comes of it.

 

Good luck with the fiddling, I'll bet the issue is one of those settings.


 ZB%20%20Storefront1%20.png               [email protected]

Don't pm or expect an answer from me here ... the links above are my contacts.

I know so much about so little that I could teach you all there is to know about nothing......


#813 The Loafer

The Loafer

    Pinball Wizard

  • VIP
  • 3,472 posts
  • Location:Embrun, Ontario, Canada

  • Flag: ---------

  • Favorite Pinball: Superman, Firepower & Tron



Posted 13 November 2014 - 09:00 PM

Is legacy USB even needed?

#814 zebulon

zebulon

    Cantankerous old B****D

  • Platinum Supporter
  • 1,179 posts
  • Location:Whitby, Ontario, Canada

  • Flag: Canada

  • Favorite Pinball: xenon, Medieval Madness, Royal Flush, Silverball Mania

Posted 13 November 2014 - 09:19 PM

only if you want into the BIOS with a usb keyboard


 ZB%20%20Storefront1%20.png               [email protected]

Don't pm or expect an answer from me here ... the links above are my contacts.

I know so much about so little that I could teach you all there is to know about nothing......


#815 kruge99

kruge99

    Pinball Wizard

  • VPF Staff
  • 3,901 posts
  • Location:Markham, Ont.

  • Flag: Canada

  • Favorite Pinball: Black Knight, High Speed and Pin*Bot



Posted 14 November 2014 - 01:16 AM

Yeah, so, if you, uh, disable Intel xHCI and enable EHCI handoff in the bios apparently your Windows 7 64bit needs about 25 minutes to download all new drivers for - well pretty much anything that's connected to my PC at least, and finally when it's done and rebooted the PC, the pinDMD2 is detected properly as an unknown device and the drivers provided by Russ install correctly!  I just tested a couple VP tables and all is well in the Land of Todd for the moment. 

 

Thanks to everyone who put up with me being a whining PITA over the last few days.  Sorry for the drama.  Peace out and Karma on!


[proud owner of a Williams Solar Fire]

- It's called "The American Dream" because you have to be asleep to believe it.
George Carlin
- Truly great madness cannot be achieved without significant intelligence.
Henrik Tikkanen
- "Reality check, Michelle, Talk about composure, Total lack of. He's a man-- About-- 12 Feet Tall--"
Carrie Kelly
Posted Image

#816 kruge99

kruge99

    Pinball Wizard

  • VPF Staff
  • 3,901 posts
  • Location:Markham, Ont.

  • Flag: Canada

  • Favorite Pinball: Black Knight, High Speed and Pin*Bot



Posted 14 November 2014 - 02:31 AM

now I just need to find the vpforum thread that talks about a custom logo...


[proud owner of a Williams Solar Fire]

- It's called "The American Dream" because you have to be asleep to believe it.
George Carlin
- Truly great madness cannot be achieved without significant intelligence.
Henrik Tikkanen
- "Reality check, Michelle, Talk about composure, Total lack of. He's a man-- About-- 12 Feet Tall--"
Carrie Kelly
Posted Image

#817 atarian

atarian

    Enthusiast

  • Members
  • PipPipPip
  • 345 posts

  • Flag: France

  • Favorite Pinball: EMs

Posted 14 November 2014 - 07:19 AM

now I just need to find the vpforum thread that talks about a custom logo...

 

If you search for dmdlogo.txt in google you will find pages referring to this.

 

One example:

http://www.vpforums....=38#entry171866

 

I think the image is uploaded to the DMD when you exit a game using Pinmame.



#818 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 14 November 2014 - 09:51 AM

Ah this is very useful information :) I will try and add this to the pinDMD FAQ section on the install guide :) Might save some people having to use pci cards :)

 

Thanks :)



#819 kruge99

kruge99

    Pinball Wizard

  • VPF Staff
  • 3,901 posts
  • Location:Markham, Ont.

  • Flag: Canada

  • Favorite Pinball: Black Knight, High Speed and Pin*Bot



Posted 14 November 2014 - 10:33 AM

I'm just glad we solved this and that my PC didn't blow up after all those drivers downloaded from the internet.  I was worried because it took about 25 minutes so I figured for sure that the Windows registry was imploding.  Anyhow, back to our regularly scheduled programming.

 

Thanks atarian, I'll look for dmdlogo.txt as you suggested.


[proud owner of a Williams Solar Fire]

- It's called "The American Dream" because you have to be asleep to believe it.
George Carlin
- Truly great madness cannot be achieved without significant intelligence.
Henrik Tikkanen
- "Reality check, Michelle, Talk about composure, Total lack of. He's a man-- About-- 12 Feet Tall--"
Carrie Kelly
Posted Image

#820 kruge99

kruge99

    Pinball Wizard

  • VPF Staff
  • 3,901 posts
  • Location:Markham, Ont.

  • Flag: Canada

  • Favorite Pinball: Black Knight, High Speed and Pin*Bot



Posted 14 November 2014 - 11:16 AM

Well I found my old pincab logo on my hard drive, but I don't know where to put it so that the pinDMD2 will load the logo.  I don't have a pincab any longer so I am playing desktop VP tables only.  Do I have to setup a Hyperpin directory?


[proud owner of a Williams Solar Fire]

- It's called "The American Dream" because you have to be asleep to believe it.
George Carlin
- Truly great madness cannot be achieved without significant intelligence.
Henrik Tikkanen
- "Reality check, Michelle, Talk about composure, Total lack of. He's a man-- About-- 12 Feet Tall--"
Carrie Kelly
Posted Image