Javascript Disabled Detected

You currently have javascript disabled. Several functions may not work. Please re-enable javascript to access full functionality.

issues with addressable LEDs (all other toys seem to work)

Started By JoltDefries , Feb 21 2020 07:38 PM

Please log in to reply

84 replies to this topic

#61 haroldw

Hobbyist

Members
40 posts

Favorite Pinball: adams family

Posted 26 April 2020 - 08:29 PM

oh. missed a question from you. yes i am using ws2811 with teensy soldered in. Actually have 2 as 2 machines being built. I will replace my cabinet.xml with a simple one from above with my specs and post a log tomorrow.

Top

#62 haroldw

Hobbyist

Members
40 posts

Favorite Pinball: adams family

Posted 28 April 2020 - 02:20 PM

No go yet But. I'm thinking my problem is the firmware in my teensy board. It does connect at table loading. Light on Teensy flashes quick for a second but then disconnects. I will experiment on this and report back. So close but gotta finish a few buttons to complete cabinet and then back to this issue. Is there a specific firmware you are all using.

Top

#63 Outhere

Pinball Wizard

Platinum Supporter
4,807 posts

Favorite Pinball: M M

Posted 28 April 2020 - 03:30 PM

This is what i used to put the Hex file on the teensy
I believe this is what did and used 102 but it's been 3 years since I put on

TeensyStripController Firmware https://github.com/D...roller/releases
The Teensy Loader Application https://www.pjrc.com...nsy/loader.html

Edited by Outhere, 27 May 2020 - 05:11 AM.

Top

#64 haroldw

Hobbyist

Members
40 posts

Favorite Pinball: adams family

Posted 28 April 2020 - 10:24 PM

Thanks. Will try. Just got pinball home. Have to put head on then try catch my breath. Lol

Top

#65 haroldw

Hobbyist

Members
40 posts

Favorite Pinball: adams family

Posted 02 May 2020 - 12:07 PM

Quick question. I now have my cabinet and global setting ok and when starting a table info is being sent to teensy but its the wrong info. My question is in the dof config tool when combining toys , do I need 3 toys ot can my 150led strip be set as 1 toy? Example should it be right pf combined with left pf and with top pf? Which would be combo1

Or do I need 3 separate combos. I only want of effects
Pf effects

Top

#66 Outhere

Pinball Wizard

Platinum Supporter
4,807 posts

Favorite Pinball: M M

Posted 02 May 2020 - 03:29 PM

If you have the lights on each side of the playing field this is what you would do Based on the cabinet file you have posted on page 2

go to Combine Toys and make two combos one for the right PF Flashers MX and PF Effects MX and one for the left.

Lastly, go to the Port Assignments Tab, choose the WS2811 - directoutputconfigini30 device and assign port 1 to your right LED strip (1 red, 2 green, 3 blue) and port 4 for the left LED strip (4 red, 5 green, 6 blue).

Edited by Outhere, 02 May 2020 - 03:32 PM.

Top

#67 haroldw

Hobbyist

Members
40 posts

Favorite Pinball: adams family

Posted 03 May 2020 - 12:56 PM

Will do and report back.

Top

#68 haroldw

Hobbyist

Members
40 posts

Favorite Pinball: adams family

Posted 03 May 2020 - 03:23 PM

Below is my log from DirectOutputConfigTester. Looks like it is working from there but nothing on game tables although led does rapid flash on game startup.

DirectOutput Version 3.1.7011.27968, built 2019.03.13 15:32
MJR Grander Unified DOF R3++ edition feat. Djrobx, Rambo3, and Freezy
DOF created by SwissLizard | https://github.com/mjrgh/DirectOutput
2020.05.03 11:17:52.651 DirectOutput Logger initialized
2020.05.03 11:17:52.635 Global config filename is "C:\DirectOutput\Config\GlobalConfig_B2SServer.xml"
2020.05.03 11:17:52.651 Global config loaded from: C:\DirectOutput\Config\GlobalConfig_B2SServer.xml
2020.05.03 11:17:52.651 Loading Pinball parts
2020.05.03 11:17:52.651 Loading cabinet
2020.05.03 11:17:52.667 Will load cabinet config file: C:\DirectOutput\Config\Cabinet.xml
2020.05.03 11:17:52.963 1 output controller defnitions and 3 toy definitions loaded from cabinet config.
2020.05.03 11:17:52.963 Cabinet config file has AutoConfig feature enabled. Calling AutoConfig.
2020.05.03 11:17:52.963 Cabinet auto configuration started
2020.05.03 11:17:52.995 PhilipsHueAutoConfigurator.AutoConfig started...note, actual connection detection will happen asynchronously, and device disabled if not succesfull (check further down in the log)
2020.05.03 11:17:52.995 LedWiz-like device at VID=1133, PID=50475, product string=USB Receiver, manufacturer string=Logitech
2020.05.03 11:17:52.995 LedWiz-like device at VID=3468, PID=258, product string=USB Sound Device        , manufacturer string=<not available>
2020.05.03 11:17:53.010 LedWiz-like device at VID=1133, PID=50475, product string=USB Receiver, manufacturer string=Logitech
2020.05.03 11:17:53.010 LedWiz-like device at VID=1133, PID=50475, product string=USB Receiver, manufacturer string=Logitech
2020.05.03 11:17:53.010 LedWiz-like device at VID=1133, PID=50475, product string=USB Receiver, manufacturer string=Logitech
2020.05.03 11:17:53.010 LedWiz-like device at VID=1133, PID=50475, product string=USB Receiver, manufacturer string=Logitech
2020.05.03 11:17:53.010 LedWiz-like device at VID=1133, PID=50475, product string=USB Receiver, manufacturer string=Logitech
2020.05.03 11:17:53.010 LedWiz-like device at VID=4660, PID=273, product string=VirtuaPin Controller, manufacturer string=
2020.05.03 11:17:53.026 Cabinet auto configuration finished
2020.05.03 11:17:53.026 Autoconfig complete.
2020.05.03 11:17:53.026 Cabinet config loaded successfully from C:\DirectOutput\Config\Cabinet.xml
2020.05.03 11:17:53.026 Cabinet loaded
2020.05.03 11:17:53.026 Loading table config
2020.05.03 11:17:53.026 Warning: No table config file found. Will try to load config from LedControl file(s).
2020.05.03 11:17:53.026 Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName afm
2020.05.03 11:17:53.026 Loading LedControl file C:\DirectOutput\Config\directoutputconfig30.ini
2020.05.03 11:17:53.026 Min DOF Version is 0.8 for file directoutputconfig30.ini
2020.05.03 11:17:53.213 Failed: YELLOW
2020.05.03 11:17:53.213 Warning: Cant parse the trigger part YELLOW of the ledcontrol table config setting Yellow AL0 AT10 AW100 AH8 L3.
2020.05.03 11:17:53.213 EXCEPTION: Could not parse setting Yellow AL0 AT10 AW100 AH8 L3 in column data W41 Aqua 50 AH100 ADU AS300/W15 Red 700 AT85 AH15 AFDEN40 AFMIN100 AFMAX160/W16 Blue 100 AT80 AH20 ADD AS300/S19|S20 White L13 AT0 AFDEN15 AFMIN10 AFMAX20/W73|W72 Dark_violet L13 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/W71 Red 60 AW100 AH100 ADD AS300/W81|W82|W83|W84|W85 Red M50 MAX50 AH100 ADU AS300/W66 Dark_violet 80 AT40 AL0 AH10 AW100 AS400 ADU L25/W66 Dark_violet 80 AT50 AL0 AH10 AW100 AS400 ADD L25/W78 Yellow 40 AT40 AL0 AH10 AW100 AS400 ADU L25/W78 Yellow 40 AT50 AL0 AH10 AW100 AS400 ADD L25/W52|W62 Blue 100 W300 AH80 ADD AS300 L25/ Yellow AL0 AT10 AW100 AH8 L3/ Yellow AL0 AT40 AW100 AH8 L3/ Yellow AL0 AT80 AW100 AH8 L3.
2020.05.03 11:17:53.213 EXCEPTION: Thread:
2020.05.03 11:17:53.213 EXCEPTION: Message: Exception --> Cant parse the part YELLOW of the ledcontrol table config setting Yellow AL0 AT10 AW100 AH8 L3.
2020.05.03 11:17:53.213 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting.ParseSettingData(String SettingData)
2020.05.03 11:17:53.213 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting..ctor(String SettingData)
2020.05.03 11:17:53.213 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigColumn.ParseColumnData(String ColumnData, Boolean ThrowExceptions)
2020.05.03 11:17:53.213 EXCEPTION: Targetsite: Void ParseSettingData(System.String)
2020.05.03 11:17:53.213 Failed: YELLOW
2020.05.03 11:17:53.213 Warning: Cant parse the trigger part YELLOW of the ledcontrol table config setting Yellow AL0 AT40 AW100 AH8 L3.
2020.05.03 11:17:53.213 EXCEPTION: Could not parse setting Yellow AL0 AT40 AW100 AH8 L3 in column data W41 Aqua 50 AH100 ADU AS300/W15 Red 700 AT85 AH15 AFDEN40 AFMIN100 AFMAX160/W16 Blue 100 AT80 AH20 ADD AS300/S19|S20 White L13 AT0 AFDEN15 AFMIN10 AFMAX20/W73|W72 Dark_violet L13 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/W71 Red 60 AW100 AH100 ADD AS300/W81|W82|W83|W84|W85 Red M50 MAX50 AH100 ADU AS300/W66 Dark_violet 80 AT40 AL0 AH10 AW100 AS400 ADU L25/W66 Dark_violet 80 AT50 AL0 AH10 AW100 AS400 ADD L25/W78 Yellow 40 AT40 AL0 AH10 AW100 AS400 ADU L25/W78 Yellow 40 AT50 AL0 AH10 AW100 AS400 ADD L25/W52|W62 Blue 100 W300 AH80 ADD AS300 L25/ Yellow AL0 AT10 AW100 AH8 L3/ Yellow AL0 AT40 AW100 AH8 L3/ Yellow AL0 AT80 AW100 AH8 L3.
2020.05.03 11:17:53.213 EXCEPTION: Thread:
2020.05.03 11:17:53.213 EXCEPTION: Message: Exception --> Cant parse the part YELLOW of the ledcontrol table config setting Yellow AL0 AT40 AW100 AH8 L3.
2020.05.03 11:17:53.213 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting.ParseSettingData(String SettingData)
2020.05.03 11:17:53.213 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting..ctor(String SettingData)
2020.05.03 11:17:53.213 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigColumn.ParseColumnData(String ColumnData, Boolean ThrowExceptions)
2020.05.03 11:17:53.213 EXCEPTION: Targetsite: Void ParseSettingData(System.String)
2020.05.03 11:17:53.213 Failed: YELLOW
2020.05.03 11:17:53.213 Warning: Cant parse the trigger part YELLOW of the ledcontrol table config setting Yellow AL0 AT80 AW100 AH8 L3.
2020.05.03 11:17:53.213 EXCEPTION: Could not parse setting Yellow AL0 AT80 AW100 AH8 L3 in column data W41 Aqua 50 AH100 ADU AS300/W15 Red 700 AT85 AH15 AFDEN40 AFMIN100 AFMAX160/W16 Blue 100 AT80 AH20 ADD AS300/S19|S20 White L13 AT0 AFDEN15 AFMIN10 AFMAX20/W73|W72 Dark_violet L13 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/W71 Red 60 AW100 AH100 ADD AS300/W81|W82|W83|W84|W85 Red M50 MAX50 AH100 ADU AS300/W66 Dark_violet 80 AT40 AL0 AH10 AW100 AS400 ADU L25/W66 Dark_violet 80 AT50 AL0 AH10 AW100 AS400 ADD L25/W78 Yellow 40 AT40 AL0 AH10 AW100 AS400 ADU L25/W78 Yellow 40 AT50 AL0 AH10 AW100 AS400 ADD L25/W52|W62 Blue 100 W300 AH80 ADD AS300 L25/ Yellow AL0 AT10 AW100 AH8 L3/ Yellow AL0 AT40 AW100 AH8 L3/ Yellow AL0 AT80 AW100 AH8 L3.
2020.05.03 11:17:53.213 EXCEPTION: Thread:
2020.05.03 11:17:53.213 EXCEPTION: Message: Exception --> Cant parse the part YELLOW of the ledcontrol table config setting Yellow AL0 AT80 AW100 AH8 L3.
2020.05.03 11:17:53.213 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting.ParseSettingData(String SettingData)
2020.05.03 11:17:53.213 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting..ctor(String SettingData)
2020.05.03 11:17:53.213 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigColumn.ParseColumnData(String ColumnData, Boolean ThrowExceptions)
2020.05.03 11:17:53.213 EXCEPTION: Targetsite: Void ParseSettingData(System.String)
2020.05.03 11:17:53.213 Warning: Previous exceptions occured in the line dm,W42 Aqua 50 AH100 ADU AS300/W18 Red 700 AT85 AH15 AFDEN40 AFMIN100 AFMAX160/W17 Blue 100 AT80 AH20 ADD AS300/W27 Navy AT72 AH15 F200 ADU AS200 BLINK 1000 BPW20/W27 Navy AT72 AH15 F200 ADD AS200 BLINK 1000 BPW20 W500/W27 Aqua L0 APCRed AL0 AW100 AT85 AH15/W48 Aqua 50 AH100 ADU AS300/S19|S20 White L13 AT0 AFDEN15 AFMIN10 AFMAX20/W73|W72 Dark_violet L13 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/W71 Red 60 AW100 AH100 ADD AS300/W81|W82|W83|W84|W85 Red M50 MAX50 AH100 ADU AS300/W57|W58|W38 Yellow 40 AT40 AL0 AH10 AW100 AS400 ADU L25/W57|W58|W38 Yellow 40 AT50 AL0 AH10 AW100 AS400 ADD L25/W47 Blue 100 W300 AH80 ADD AS300 L25/W38 Yellow AL0 AT40 AW100 AH8 L3,W41 Aqua 50 AH100 ADU AS300/W15 Red 700 AT85 AH15 AFDEN40 AFMIN100 AFMAX160/W16 Blue 100 AT80 AH20 ADD AS300/S19|S20 White L13 AT0 AFDEN15 AFMIN10 AFMAX20/W73|W72 Dark_violet L13 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/W71 Red 60 AW100 AH100 ADD AS300/W81|W82|W83|W84|W85 Red M50 MAX50 AH100 ADU AS300/W66 Dark_violet 80 AT40 AL0 AH10 AW100 AS400 ADU L25/W66 Dark_violet 80 AT50 AL0 AH10 AW100 AS400 ADD L25/W78 Yellow 40 AT40 AL0 AH10 AW100 AS400 ADU L25/W78 Yellow 40 AT50 AL0 AH10 AW100 AS400 ADD L25/W52|W62 Blue 100 W300 AH80 ADD AS300 L25/ Yellow AL0 AT10 AW100 AH8 L3/ Yellow AL0 AT40 AW100 AH8 L3/ Yellow AL0 AT80 AW100 AH8 L3 of the ledcontrol file
2020.05.03 11:17:53.698 1 directoutputconfig.ini or ledcontrol.ini files loaded.
2020.05.03 11:17:53.698 Config for RomName afm exists in LedControl data. Updating cabinet and config.
2020.05.03 11:17:53.729 Table config loading finished: romname=afm, tablename=Attack from Mars 2.0.1
2020.05.03 11:17:53.729 Pinball parts loaded
2020.05.03 11:17:53.729 Starting processes
2020.05.03 11:17:53.729 Initializing cabinet
2020.05.03 11:17:53.729 Debug: Initializing output controllers
2020.05.03 11:17:53.745 TeensyStripController TeensyStripContoller intialized and updater thread started.
2020.05.03 11:17:53.745 Debug: Output controllers initialized
2020.05.03 11:17:53.745 TeensyStripController TeensyStripContoller updater thread started.
2020.05.03 11:17:53.760 Cabinet initialized
2020.05.03 11:17:53.760 Loading shape definition file: C:\DirectOutput\Config\DirectOutputShapes.xml
2020.05.03 11:17:53.823 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:80), Matrix(W:75, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:60, Width:1, Height:61)
2020.05.03 11:17:53.823 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:80), Matrix(W:75, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:60, Width:1, Height:61)
2020.05.03 11:17:53.823 Debug: MatrixBase for RGBAMatrixColorEffect. Calculated area size: AreaDef(L:0, T:35, W:100, H:8), Matrix(W:75, H:1), ResultArea(Left: 0, Top:26, Right:0, Bottom:32, Width:1, Height:7)
2020.05.03 11:17:53.823 Debug: MatrixBase for RGBAMatrixColorEffect. Calculated area size: AreaDef(L:0, T:7, W:100, H:6), Matrix(W:75, H:1), ResultArea(Left: 0, Top:5, Right:0, Bottom:9, Width:1, Height:5)
2020.05.03 11:17:53.823 Debug: MatrixBase for RGBAMatrixColorEffect. Calculated area size: AreaDef(L:0, T:15, W:100, H:6), Matrix(W:75, H:1), ResultArea(Left: 0, Top:11, Right:0, Bottom:15, Width:1, Height:5)
2020.05.03 11:17:53.823 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:65, W:100, H:15), Matrix(W:75, H:1), ResultArea(Left: 0, Top:48, Right:0, Bottom:60, Width:1, Height:13)
2020.05.03 11:17:53.823 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:70, W:100, H:20), Matrix(W:75, H:1), ResultArea(Left: 0, Top:52, Right:0, Bottom:67, Width:1, Height:16)
2020.05.03 11:17:53.823 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:10, W:100, H:90), Matrix(W:75, H:1), ResultArea(Left: 0, Top:7, Right:0, Bottom:74, Width:1, Height:68)
2020.05.03 11:17:53.823 Debug: MatrixBase for RGBAMatrixColorEffect. Calculated area size: AreaDef(L:0, T:80, W:100, H:10), Matrix(W:75, H:1), ResultArea(Left: 0, Top:60, Right:0, Bottom:67, Width:1, Height:8)
2020.05.03 11:17:53.823 Debug: MatrixBase for RGBAMatrixColorEffect. Calculated area size: AreaDef(L:0, T:80, W:100, H:10), Matrix(W:75, H:1), ResultArea(Left: 0, Top:60, Right:0, Bottom:67, Width:1, Height:8)
2020.05.03 11:17:53.823 Debug: MatrixBase for RGBAMatrixColorEffect. Calculated area size: AreaDef(L:0, T:15, W:100, H:8), Matrix(W:75, H:1), ResultArea(Left: 0, Top:11, Right:0, Bottom:17, Width:1, Height:7)
2020.05.03 11:17:53.823 Debug: MatrixBase for RGBAMatrixColorEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:6), Matrix(W:75, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:4, Width:1, Height:5)
2020.05.03 11:17:53.823 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:80), Matrix(W:75, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:60, Width:1, Height:61)
2020.05.03 11:17:53.823 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:65, W:100, H:15), Matrix(W:75, H:1), ResultArea(Left: 0, Top:48, Right:0, Bottom:60, Width:1, Height:13)
2020.05.03 11:17:53.823 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:70, W:100, H:20), Matrix(W:75, H:1), ResultArea(Left: 0, Top:52, Right:0, Bottom:67, Width:1, Height:16)
2020.05.03 11:17:53.823 Framework initialized.
2020.05.03 11:17:53.823 Have fun!
2020.05.03 11:17:53.885 TeensyStripController TeensyStripContoller updater thread has connected to TeensyStripController TeensyStripContoller.

Top

#69 Outhere

Pinball Wizard

Platinum Supporter
4,807 posts

Favorite Pinball: M M

Posted 03 May 2020 - 07:06 PM

Does the light rapid flash when you are playing the game?

Sure looks like it should be working

Top

#70 haroldw

Hobbyist

Members
40 posts

Favorite Pinball: adams family

Posted 04 May 2020 - 01:39 AM

No but it does flash2x every 1.5secs

here is log from game High Speed. Bottom of log shows Teensy disconnects

DirectOutput Version 3.1.7011.27968, built 2019.03.13 15:32
MJR Grander Unified DOF R3++ edition feat. Djrobx, Rambo3, and Freezy
DOF created by SwissLizard | https://github.com/mjrgh/DirectOutput
2020.05.03 21:30:32.141 DirectOutput Logger initialized
2020.05.03 21:30:32.112 Global config filename is "C:\DIRECTOUTPUT\config\GlobalConfig_B2SServer.xml"
2020.05.03 21:30:32.141 Global config loaded from: C:\DIRECTOUTPUT\config\GlobalConfig_B2SServer.xml
2020.05.03 21:30:32.142 Loading Pinball parts
2020.05.03 21:30:32.144 Loading cabinet
2020.05.03 21:30:32.145 Will load cabinet config file: C:\DirectOutput\Config\Cabinet.xml
2020.05.03 21:30:32.599 1 output controller defnitions and 3 toy definitions loaded from cabinet config.
2020.05.03 21:30:32.600 Cabinet config file has AutoConfig feature enabled. Calling AutoConfig.
2020.05.03 21:30:32.600 Cabinet auto configuration started
2020.05.03 21:30:32.626 PhilipsHueAutoConfigurator.AutoConfig started...note, actual connection detection will happen asynchronously, and device disabled if not succesfull (check further down in the log)
2020.05.03 21:30:32.635 LedWiz-like device at VID=1133, PID=50475, product string=USB Receiver, manufacturer string=Logitech
2020.05.03 21:30:32.636 LedWiz-like device at VID=3468, PID=258, product string=USB Sound Device        , manufacturer string=<not available>
2020.05.03 21:30:32.638 LedWiz-like device at VID=1133, PID=50475, product string=USB Receiver, manufacturer string=Logitech
2020.05.03 21:30:32.640 LedWiz-like device at VID=1133, PID=50475, product string=USB Receiver, manufacturer string=Logitech
2020.05.03 21:30:32.642 LedWiz-like device at VID=1133, PID=50475, product string=USB Receiver, manufacturer string=Logitech
2020.05.03 21:30:32.644 LedWiz-like device at VID=1133, PID=50475, product string=USB Receiver, manufacturer string=Logitech
2020.05.03 21:30:32.646 LedWiz-like device at VID=1133, PID=50475, product string=USB Receiver, manufacturer string=Logitech
2020.05.03 21:30:32.648 LedWiz-like device at VID=4660, PID=273, product string=VirtuaPin Controller, manufacturer string=
2020.05.03 21:30:32.655 Cabinet auto configuration finished
2020.05.03 21:30:32.655 Autoconfig complete.
2020.05.03 21:30:32.655 Cabinet config loaded successfully from C:\DirectOutput\Config\Cabinet.xml
2020.05.03 21:30:32.655 Cabinet loaded
2020.05.03 21:30:32.655 Loading table config
2020.05.03 21:30:32.656 Warning: No table config file found. Will try to load config from LedControl file(s).
2020.05.03 21:30:32.656 Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName hs_l4
2020.05.03 21:30:32.658 Loading LedControl file C:\DirectOutput\Config\directoutputconfig30.ini
2020.05.03 21:30:32.666 Min DOF Version is 0.8 for file directoutputconfig30.ini
2020.05.03 21:30:32.852 Failed: YELLOW
2020.05.03 21:30:32.852 Warning: Cant parse the trigger part YELLOW of the ledcontrol table config setting Yellow AL0 AT10 AW100 AH8 L3.
2020.05.03 21:30:32.853 EXCEPTION: Could not parse setting Yellow AL0 AT10 AW100 AH8 L3 in column data W41 Aqua 50 AH100 ADU AS300/W15 Red 700 AT85 AH15 AFDEN40 AFMIN100 AFMAX160/W16 Blue 100 AT80 AH20 ADD AS300/S19|S20 White L13 AT0 AFDEN15 AFMIN10 AFMAX20/W73|W72 Dark_violet L13 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/W71 Red 60 AW100 AH100 ADD AS300/W81|W82|W83|W84|W85 Red M50 MAX50 AH100 ADU AS300/W66 Dark_violet 80 AT40 AL0 AH10 AW100 AS400 ADU L25/W66 Dark_violet 80 AT50 AL0 AH10 AW100 AS400 ADD L25/W78 Yellow 40 AT40 AL0 AH10 AW100 AS400 ADU L25/W78 Yellow 40 AT50 AL0 AH10 AW100 AS400 ADD L25/W52|W62 Blue 100 W300 AH80 ADD AS300 L25/ Yellow AL0 AT10 AW100 AH8 L3/ Yellow AL0 AT40 AW100 AH8 L3/ Yellow AL0 AT80 AW100 AH8 L3.
2020.05.03 21:30:32.853 EXCEPTION: Thread:
2020.05.03 21:30:32.853 EXCEPTION: Message: Exception --> Cant parse the part YELLOW of the ledcontrol table config setting Yellow AL0 AT10 AW100 AH8 L3.
2020.05.03 21:30:32.856 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting.ParseSettingData(String SettingData)
2020.05.03 21:30:32.856 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting..ctor(String SettingData)
2020.05.03 21:30:32.856 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigColumn.ParseColumnData(String ColumnData, Boolean ThrowExceptions)
2020.05.03 21:30:32.857 EXCEPTION: Targetsite: Void ParseSettingData(System.String)
2020.05.03 21:30:32.857 Failed: YELLOW
2020.05.03 21:30:32.857 Warning: Cant parse the trigger part YELLOW of the ledcontrol table config setting Yellow AL0 AT40 AW100 AH8 L3.
2020.05.03 21:30:32.857 EXCEPTION: Could not parse setting Yellow AL0 AT40 AW100 AH8 L3 in column data W41 Aqua 50 AH100 ADU AS300/W15 Red 700 AT85 AH15 AFDEN40 AFMIN100 AFMAX160/W16 Blue 100 AT80 AH20 ADD AS300/S19|S20 White L13 AT0 AFDEN15 AFMIN10 AFMAX20/W73|W72 Dark_violet L13 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/W71 Red 60 AW100 AH100 ADD AS300/W81|W82|W83|W84|W85 Red M50 MAX50 AH100 ADU AS300/W66 Dark_violet 80 AT40 AL0 AH10 AW100 AS400 ADU L25/W66 Dark_violet 80 AT50 AL0 AH10 AW100 AS400 ADD L25/W78 Yellow 40 AT40 AL0 AH10 AW100 AS400 ADU L25/W78 Yellow 40 AT50 AL0 AH10 AW100 AS400 ADD L25/W52|W62 Blue 100 W300 AH80 ADD AS300 L25/ Yellow AL0 AT10 AW100 AH8 L3/ Yellow AL0 AT40 AW100 AH8 L3/ Yellow AL0 AT80 AW100 AH8 L3.
2020.05.03 21:30:32.857 EXCEPTION: Thread:
2020.05.03 21:30:32.857 EXCEPTION: Message: Exception --> Cant parse the part YELLOW of the ledcontrol table config setting Yellow AL0 AT40 AW100 AH8 L3.
2020.05.03 21:30:32.857 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting.ParseSettingData(String SettingData)
2020.05.03 21:30:32.857 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting..ctor(String SettingData)
2020.05.03 21:30:32.857 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigColumn.ParseColumnData(String ColumnData, Boolean ThrowExceptions)
2020.05.03 21:30:32.857 EXCEPTION: Targetsite: Void ParseSettingData(System.String)
2020.05.03 21:30:32.857 Failed: YELLOW
2020.05.03 21:30:32.857 Warning: Cant parse the trigger part YELLOW of the ledcontrol table config setting Yellow AL0 AT80 AW100 AH8 L3.
2020.05.03 21:30:32.857 EXCEPTION: Could not parse setting Yellow AL0 AT80 AW100 AH8 L3 in column data W41 Aqua 50 AH100 ADU AS300/W15 Red 700 AT85 AH15 AFDEN40 AFMIN100 AFMAX160/W16 Blue 100 AT80 AH20 ADD AS300/S19|S20 White L13 AT0 AFDEN15 AFMIN10 AFMAX20/W73|W72 Dark_violet L13 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/W71 Red 60 AW100 AH100 ADD AS300/W81|W82|W83|W84|W85 Red M50 MAX50 AH100 ADU AS300/W66 Dark_violet 80 AT40 AL0 AH10 AW100 AS400 ADU L25/W66 Dark_violet 80 AT50 AL0 AH10 AW100 AS400 ADD L25/W78 Yellow 40 AT40 AL0 AH10 AW100 AS400 ADU L25/W78 Yellow 40 AT50 AL0 AH10 AW100 AS400 ADD L25/W52|W62 Blue 100 W300 AH80 ADD AS300 L25/ Yellow AL0 AT10 AW100 AH8 L3/ Yellow AL0 AT40 AW100 AH8 L3/ Yellow AL0 AT80 AW100 AH8 L3.
2020.05.03 21:30:32.857 EXCEPTION: Thread:
2020.05.03 21:30:32.857 EXCEPTION: Message: Exception --> Cant parse the part YELLOW of the ledcontrol table config setting Yellow AL0 AT80 AW100 AH8 L3.
2020.05.03 21:30:32.857 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting.ParseSettingData(String SettingData)
2020.05.03 21:30:32.857 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigSetting..ctor(String SettingData)
2020.05.03 21:30:32.857 EXCEPTION: Stacktrace:    at DirectOutput.LedControl.Loader.TableConfigColumn.ParseColumnData(String ColumnData, Boolean ThrowExceptions)
2020.05.03 21:30:32.857 EXCEPTION: Targetsite: Void ParseSettingData(System.String)
2020.05.03 21:30:32.857 Warning: Previous exceptions occured in the line dm,W42 Aqua 50 AH100 ADU AS300/W18 Red 700 AT85 AH15 AFDEN40 AFMIN100 AFMAX160/W17 Blue 100 AT80 AH20 ADD AS300/W27 Navy AT72 AH15 F200 ADU AS200 BLINK 1000 BPW20/W27 Navy AT72 AH15 F200 ADD AS200 BLINK 1000 BPW20 W500/W27 Aqua L0 APCRed AL0 AW100 AT85 AH15/W48 Aqua 50 AH100 ADU AS300/S19|S20 White L13 AT0 AFDEN15 AFMIN10 AFMAX20/W73|W72 Dark_violet L13 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/W71 Red 60 AW100 AH100 ADD AS300/W81|W82|W83|W84|W85 Red M50 MAX50 AH100 ADU AS300/W57|W58|W38 Yellow 40 AT40 AL0 AH10 AW100 AS400 ADU L25/W57|W58|W38 Yellow 40 AT50 AL0 AH10 AW100 AS400 ADD L25/W47 Blue 100 W300 AH80 ADD AS300 L25/W38 Yellow AL0 AT40 AW100 AH8 L3,W41 Aqua 50 AH100 ADU AS300/W15 Red 700 AT85 AH15 AFDEN40 AFMIN100 AFMAX160/W16 Blue 100 AT80 AH20 ADD AS300/S19|S20 White L13 AT0 AFDEN15 AFMIN10 AFMAX20/W73|W72 Dark_violet L13 AT0 AFDEN8 AFMIN150 AFMAX250 AFFADE150/W71 Red 60 AW100 AH100 ADD AS300/W81|W82|W83|W84|W85 Red M50 MAX50 AH100 ADU AS300/W66 Dark_violet 80 AT40 AL0 AH10 AW100 AS400 ADU L25/W66 Dark_violet 80 AT50 AL0 AH10 AW100 AS400 ADD L25/W78 Yellow 40 AT40 AL0 AH10 AW100 AS400 ADU L25/W78 Yellow 40 AT50 AL0 AH10 AW100 AS400 ADD L25/W52|W62 Blue 100 W300 AH80 ADD AS300 L25/ Yellow AL0 AT10 AW100 AH8 L3/ Yellow AL0 AT40 AW100 AH8 L3/ Yellow AL0 AT80 AW100 AH8 L3 of the ledcontrol file
2020.05.03 21:30:33.356 1 directoutputconfig.ini or ledcontrol.ini files loaded.
2020.05.03 21:30:33.358 Config for RomName hs_l4 exists in LedControl data. Updating cabinet and config.
2020.05.03 21:30:33.383 Warning: No color valid color definition found for area effect. Skipped setting 2 in column 1 for LedWizEqivalent number 30.
2020.05.03 21:30:33.384 Table config loading finished: romname=hs_l4, tablename=High_Speed_(Williams 1986)
2020.05.03 21:30:33.385 Pinball parts loaded
2020.05.03 21:30:33.386 Starting processes
2020.05.03 21:30:33.386 Initializing cabinet
2020.05.03 21:30:33.386 Debug: Initializing output controllers
2020.05.03 21:30:33.391 TeensyStripController TeensyStripContoller intialized and updater thread started.
2020.05.03 21:30:33.391 Debug: Output controllers initialized
2020.05.03 21:30:33.392 TeensyStripController TeensyStripContoller updater thread started.
2020.05.03 21:30:33.396 Cabinet initialized
2020.05.03 21:30:33.400 Loading shape definition file: C:\DirectOutput\Config\DirectOutputShapes.xml
2020.05.03 21:30:33.445 Debug: MatrixBase for RGBAMatrixShiftEffect. Calculated area size: AreaDef(L:0, T:85, W:100, H:15), Matrix(W:75, H:1), ResultArea(Left: 0, Top:63, Right:0, Bottom:74, Width:1, Height:12)
2020.05.03 21:30:33.446 Debug: MatrixBase for RGBAMatrixColorEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:12), Matrix(W:75, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:9, Width:1, Height:10)
2020.05.03 21:30:33.446 Debug: MatrixBase for RGBAMatrixColorEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:12), Matrix(W:75, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:9, Width:1, Height:10)
2020.05.03 21:30:33.446 Debug: MatrixBase for RGBAMatrixColorEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:12), Matrix(W:75, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:9, Width:1, Height:10)
2020.05.03 21:30:33.446 Debug: MatrixBase for RGBAMatrixColorEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:12), Matrix(W:75, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:9, Width:1, Height:10)
2020.05.03 21:30:33.446 Debug: MatrixBase for RGBAMatrixColorEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:12), Matrix(W:75, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:9, Width:1, Height:10)
2020.05.03 21:30:33.446 Debug: MatrixBase for RGBAMatrixColorEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:12), Matrix(W:75, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:9, Width:1, Height:10)
2020.05.03 21:30:33.446 Debug: MatrixBase for RGBAMatrixColorEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:12), Matrix(W:75, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:9, Width:1, Height:10)
2020.05.03 21:30:33.446 Debug: MatrixBase for RGBAMatrixColorEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:12), Matrix(W:75, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:9, Width:1, Height:10)
2020.05.03 21:30:33.446 Debug: MatrixBase for RGBAMatrixColorEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:12), Matrix(W:75, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:9, Width:1, Height:10)
2020.05.03 21:30:33.446 Debug: MatrixBase for RGBAMatrixColorEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:12), Matrix(W:75, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:9, Width:1, Height:10)
2020.05.03 21:30:33.446 Debug: MatrixBase for RGBAMatrixColorEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:12), Matrix(W:75, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:9, Width:1, Height:10)
2020.05.03 21:30:33.446 Debug: MatrixBase for RGBAMatrixColorEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:12), Matrix(W:75, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:9, Width:1, Height:10)
2020.05.03 21:30:33.446 Debug: MatrixBase for RGBAMatrixColorEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:12), Matrix(W:75, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:9, Width:1, Height:10)
2020.05.03 21:30:33.447 Debug: MatrixBase for RGBAMatrixColorEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:12), Matrix(W:75, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:9, Width:1, Height:10)
2020.05.03 21:30:33.447 Debug: MatrixBase for RGBAMatrixColorEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:12), Matrix(W:75, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:9, Width:1, Height:10)
2020.05.03 21:30:33.447 Debug: MatrixBase for RGBAMatrixColorEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:12), Matrix(W:75, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:9, Width:1, Height:10)
2020.05.03 21:30:33.447 Debug: MatrixBase for RGBAMatrixColorEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:12), Matrix(W:75, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:9, Width:1, Height:10)
2020.05.03 21:30:33.447 Debug: MatrixBase for RGBAMatrixColorEffect. Calculated area size: AreaDef(L:0, T:0, W:100, H:12), Matrix(W:75, H:1), ResultArea(Left: 0, Top:0, Right:0, Bottom:9, Width:1, Height:10)
2020.05.03 21:30:33.449 Framework initialized.
2020.05.03 21:30:33.449 Have fun!
2020.05.03 21:30:33.509 TeensyStripController TeensyStripContoller updater thread has connected to TeensyStripController TeensyStripContoller.
2020.05.03 21:31:48.077 Finishing framework
2020.05.03 21:31:48.079 Finishing cabinet
2020.05.03 21:31:48.080 Debug: Finishing output controllers
2020.05.03 21:31:48.085 TeensyStripController TeensyStripContoller updater thread has disconnected from TeensyStripController TeensyStripContoller and will terminate.
2020.05.03 21:31:48.085 TeensyStripController TeensyStripContoller finished and updater thread stopped.
2020.05.03 21:31:48.085 Debug: Output controllers finished
2020.05.03 21:31:48.085 Cabinet finished
2020.05.03 21:31:48.085 DirectOutput framework finished.
2020.05.03 21:31:48.085 Bye and thanks for using!

Top

#71 Outhere

Pinball Wizard

Platinum Supporter
4,807 posts

Favorite Pinball: M M

Posted 04 May 2020 - 05:34 AM

When it's working it will flash fast when the game is running

Top

#72 haroldw

Hobbyist

Members
40 posts

Favorite Pinball: adams family

Posted 04 May 2020 - 01:01 PM

I'm outta ideas. Gotta be something real simple. Lol
Cant figure out why it disconnects after loading shapes

Top

#73 haroldw

Hobbyist

Members
40 posts

Favorite Pinball: adams family

Posted 04 May 2020 - 04:38 PM

removed DirectOut and all files and folders. Started form scratch. Same end result.All loads but then disconnects from Teensy Controller.

Top

#74 haroldw

Hobbyist

Members
40 posts

Favorite Pinball: adams family

Posted 04 May 2020 - 06:03 PM

in log finishing output controllers is what disconnects from Teensy. Im thinking something wrong in cabinet file when finishing outputs.

Top

#75 Outhere

Pinball Wizard

Platinum Supporter
4,807 posts

Favorite Pinball: M M

Posted 04 May 2020 - 06:35 PM

Post your cabinet file I will test on my cab

When posting large items like a LOG or ini files

After you paste - highlight it, Then click on this symbol above <> then post

Top

#76 haroldw

Hobbyist

Members
40 posts

Favorite Pinball: adams family

Posted 04 May 2020 - 07:32 PM

<?xml version="1.0"?>
<Cabinet xmlns:xsi="http://www.w3.org/20...Schema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<Name>Harold</Name>

<OutputControllers>
    <TeensyStripController>
      <Name>TeensyStripContoller</Name>
      <NumberOfLedsStrip1>75</NumberOfLedsStrip1>
   <NumberOfLedsStrip2>75</NumberOfLedsStrip2>
      <NumberOfLedsStrip3>0</NumberOfLedsStrip3>
      <NumberOfLedsStrip4>0</NumberOfLedsStrip4>
      <NumberOfLedsStrip5>0</NumberOfLedsStrip5>
      <NumberOfLedsStrip6>0</NumberOfLedsStrip6>
      <NumberOfLedsStrip7>0</NumberOfLedsStrip7>
      <NumberOfLedsStrip8>0</NumberOfLedsStrip8>
      <ComPortName>COM3</ComPortName>
    </TeensyStripController>
</OutputControllers>

   <Toys>
    <LedStrip>
      <Name>PF Right</Name>
      <Width>1</Width>
      <Height>75</Height>
      <LedStripArrangement>BottomUpLeftRight</LedStripArrangement>
      <ColorOrder>GRB</ColorOrder>
      <FirstLedNumber>1</FirstLedNumber>
      <FadingCurveName>SwissLizardsLedCurve</FadingCurveName>
      <OutputControllerName>TeensyStripController</OutputControllerName>
    </LedStrip>
    <LedStrip>
      <Name>PF Left</Name>
      <Width>1</Width>
      <Height>75</Height>
      <LedStripArrangement>TopDownLeftRight</LedStripArrangement>
      <ColorOrder>GRB</ColorOrder>
      <FirstLedNumber>76</FirstLedNumber>
      <FadingCurveName>SwissLizardsLedCurve</FadingCurveName>
      <OutputControllerName>TeensyStripController</OutputControllerName>
    </LedStrip>

    <LedWizEquivalent>
       <Name>LedWizEquivalent 30</Name>
      <Outputs>
        <LedWizEquivalentOutput>
          <OutputName>PF Right</OutputName>
          <LedWizEquivalentOutputNumber>1</LedWizEquivalentOutputNumber>
        </LedWizEquivalentOutput>
        <LedWizEquivalentOutput>
          <OutputName>PF Left</OutputName>
          <LedWizEquivalentOutputNumber>4</LedWizEquivalentOutputNumber>
        </LedWizEquivalentOutput>

      </Outputs>
     <LedWizNumber>30</LedWizNumber>
    </LedWizEquivalent>
</Toys>
<AutoConfigEnabled>true</AutoConfigEnabled>
</Cabinet>

good luck Im out of ideas

<?xml version="1.0" encoding="utf-8"?>

And here is GlobalConfig_B2SServer.xml

<GlobalConfig>
<LedWizDefaultMinCommandIntervalMs>10</LedWizDefaultMinCommandIntervalMs>
<LedControlMinimumEffectDurationMs>60</LedControlMinimumEffectDurationMs>
<LedControlMinimumRGBEffectDurationMs>120</LedControlMinimumRGBEffectDurationMs>
<PacLedDefaultMinCommandIntervalMs>10</PacLedDefaultMinCommandIntervalMs>
<IniFilesPath>C:\DirectOutput\Config</IniFilesPath>
<CabinetConfigFilePattern></CabinetConfigFilePattern>
<TableConfigFilePatterns />
<EnableLogging>true</EnableLogging>
<ClearLogOnSessionStart>true</ClearLogOnSessionStart>
<LogFilePattern>.\DirectOutput1.log</LogFilePattern>

<?xml version="1.0" encoding="utf-8"?>

Here is config again with proper log destinatrion

Here is proper config with proper output log

<?xml version="1.0" encoding="utf-8"?>


<GlobalConfig>
<LedWizDefaultMinCommandIntervalMs>10</LedWizDefaultMinCommandIntervalMs>
<LedControlMinimumEffectDurationMs>60</LedControlMinimumEffectDurationMs>
<LedControlMinimumRGBEffectDurationMs>120</LedControlMinimumRGBEffectDurationMs>
<PacLedDefaultMinCommandIntervalMs>10</PacLedDefaultMinCommandIntervalMs>
<IniFilesPath>C:\DirectOutput\Config</IniFilesPath>
<CabinetConfigFilePattern></CabinetConfigFilePattern>
<TableConfigFilePatterns />
<EnableLogging>true</EnableLogging>
<ClearLogOnSessionStart>true</ClearLogOnSessionStart>
<LogFilePattern>.\DirectOutput.log</LogFilePattern>
</GlobalConfig>

Top

#77 haroldw

Hobbyist

Members
40 posts

Favorite Pinball: adams family

Posted 04 May 2020 - 07:45 PM

<?xml version="1.0" encoding="utf-8"?>


<GlobalConfig>
<LedWizDefaultMinCommandIntervalMs>10</LedWizDefaultMinCommandIntervalMs>
<LedControlMinimumEffectDurationMs>60</LedControlMinimumEffectDurationMs>
<LedControlMinimumRGBEffectDurationMs>120</LedControlMinimumRGBEffectDurationMs>
<PacLedDefaultMinCommandIntervalMs>10</PacLedDefaultMinCommandIntervalMs>
<IniFilesPath>C:\DirectOutput\Config</IniFilesPath>
<CabinetConfigFilePattern>c:\Directoutput\Config\Cabinet.xml</CabinetConfigFilePattern>
<TableConfigFilePatterns />
<EnableLogging>true</EnableLogging>
<ClearLogOnSessionStart>true</ClearLogOnSessionStart>
<LogFilePattern>.\DirectOutput1.log</LogFilePattern>
</GlobalConfig>

<?xml version="1.0"?>
<Cabinet xmlns:xsi="http://www.w3.org/20...Schema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<Name>Harold</Name>

screwed up. above post is now correct

Top

#78 Outhere

Pinball Wizard

Platinum Supporter
4,807 posts

Favorite Pinball: M M

Posted 04 May 2020 - 08:45 PM

Try this

<?xml version="1.0"?>
<Cabinet xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
  <Name>TimoPin</Name>
   <OutputControllers>

    
    <TeensyStripController>
     <Name>LEDStripController</Name>
      <NumberOfLedsStrip1>75</NumberOfLedsStrip1>
      <NumberOfLedsStrip2>75</NumberOfLedsStrip2>
      <NumberOfLedsStrip3>0</NumberOfLedsStrip3>
      <NumberOfLedsStrip4>0</NumberOfLedsStrip4>
      <NumberOfLedsStrip5>0</NumberOfLedsStrip5>
      <NumberOfLedsStrip6>0</NumberOfLedsStrip6>
      <NumberOfLedsStrip7>0</NumberOfLedsStrip7>
      <NumberOfLedsStrip8>0</NumberOfLedsStrip8>
      <ComPortName>COM3</ComPortName>
    </TeensyStripController>
    
   </OutputControllers>

      <Toys>


    <LedStrip>
      <Name>PF Right</Name>
      <Width>1</Width>
      <Height>75</Height>
      <LedStripArrangement>BottomUpLeftRight</LedStripArrangement>
      <ColorOrder>GRB</ColorOrder>
      <FirstLedNumber>1</FirstLedNumber>
      <FadingCurveName>SwissLizardsLedCurve</FadingCurveName>
      <OutputControllerName>LEDStripController</OutputControllerName>
    </LedStrip>


    <LedStrip>
      <Name>PF Left</Name>
      <Width>1</Width>
      <Height>75</Height>
      <LedStripArrangement>BottomUpLeftRight</LedStripArrangement>
      <ColorOrder>GRB</ColorOrder>
      <FirstLedNumber>76</FirstLedNumber>
      <FadingCurveName>SwissLizardsLedCurve</FadingCurveName>
      <OutputControllerName>LEDStripController</OutputControllerName>
    </LedStrip>
 
   <LedWizEquivalent>
   <Name>LedWizEquivalent 30</Name>
    <Outputs>
    <LedWizEquivalentOutput>
     <OutputName>PF Right</OutputName>
     <LedWizEquivalentOutputNumber>1</LedWizEquivalentOutputNumber>
    </LedWizEquivalentOutput>    
    <LedWizEquivalentOutput>
     <OutputName>PF Left</OutputName>
     <LedWizEquivalentOutputNumber>4</LedWizEquivalentOutputNumber>
    </LedWizEquivalentOutput>

   </Outputs>
   <LedWizNumber>30</LedWizNumber>
   </LedWizEquivalent>
   </Toys>
 <AutoConfigEnabled>true</AutoConfigEnabled>
</Cabinet>

Top

#79 haroldw

Hobbyist

Members
40 posts

Favorite Pinball: adams family

Posted 04 May 2020 - 09:20 PM

WOW. It works. What did you do different

Top

#80 haroldw

Hobbyist

Members
40 posts

Favorite Pinball: adams family

Posted 04 May 2020 - 09:30 PM

I see Ledstripcontroller name change but thought I tried that a few days back. 14 days later and its Alive.
Cant thank you enough. Hoping to repay back to the community.

Top

Back to VP Help Center

Main Resources Table Templates Playfield Images Image Library Sound Library Key Codes	VP Guides VP8 Guide - English VP8 Guide - Deutsch VP9 Guide - English VP9.1.x Guide - English VP Object Guide VPM Documentation
Future Pinball Resources Playfield Images 3D Model Library	Future Pinball Guides FP Script Guide Big Draco Script Guide FP Table Design Guide FP DMD Guide

Install Visual Pinball

VP Downloads

Essential Files

Tutorial Categories

ROM Adjustments

VP 8 Desktop Tables

VP 9 Desktop Tables

VP9 Cabinet Tables

VPX Tables

Media Packs

Backglasses

Main Resources

VP Guides

Future Pinball Resources

Future Pinball Guides

Interviews

Useful LInks