Jump to content



Photo
* * * * * 2 votes

pinDMD-2 development :)


  • Please log in to reply
838 replies to this topic

#701 talon

talon

    Hobbyist

  • Members
  • PipPip
  • 41 posts
  • Location:Near Manchester UK

  • Flag: England

  • Favorite Pinball: Medieval Madness

Posted 27 August 2013 - 02:52 PM

The molex on your display should have the voltages written on it :)

red = 5v

yellow = 12v

 

I think you can just plug it in im not 100% as i use a different power supply.

let me confirm when i get home :)

 

The connector on the display should just ignore the 5v pin and just use the 2 center grounds and the 12v

 

 

 

 

cheers - very much appreciated if you can confirm.


Edited by talon, 27 August 2013 - 02:53 PM.


#702 sigma415

sigma415

    Hobbyist

  • Platinum Supporter
  • 48 posts
  • Location:Germany

  • Flag: Germany

  • Favorite Pinball: Monster Bash

Posted 27 August 2013 - 04:23 PM

Is there any possibility to send a pattern file like dmdlogo.txt created e.g. with DMDit via command line or VB script to the PinDMD2 ?

 

@russdx:

 

Hello russdx,

 

maybe you have some kind of test routine which can do this ?

 

Thanks a lot.


 Using Win7 x64, VP 9.9.1 & VP Physmod5 & VP10, unified PinMAME 2.23, PinballX 2.12, PinDMD V2 (Real DMD), I-PAC2 button controller, Ledwiz with DOF R2, Nanotech Plunger

Like to create Real DMD Videos for PinballX: Tommy The Pinball Wizard (Data East 1994).gif

 


#703 james hellings

james hellings

    Hobbyist

  • Members
  • PipPip
  • 36 posts

  • Flag: United States of America

  • Favorite Pinball: vector

Posted 27 August 2013 - 06:36 PM

@james hellings

 

what os/mb are you running? unless your system recognizes the pinDMD nothing will work. Sounds like the os/mb combo does not ike the pinDMD :( Or usb drivers have not been installed properly.

 

I have found for these rare occasions its easiest to just put in a cheap pci usb card. Below is a known working car. It saves a lot of head aches!!!

http://www.ebay.co.u...cat=0&_from=R40

i am running a brand new built machine, win7 64 bit, Board: ASUSTeK COMPUTER INC. Z87-A Rev 1.xx.  The device manager does not show any unknown devices, its just that after login i get the temporary message about usb device not recognized.  is there a way to install the drivers if you're not prompted for them and no unknown device appears in the mngr?


Edited by james hellings, 27 August 2013 - 06:38 PM.


#704 talon

talon

    Hobbyist

  • Members
  • PipPip
  • 41 posts
  • Location:Near Manchester UK

  • Flag: England

  • Favorite Pinball: Medieval Madness

Posted 27 August 2013 - 08:00 PM





The molex on your display should have the voltages written on it :)
red = 5v
yellow = 12v
 
I think you can just plug it in im not 100% as i use a different power supply.
let me confirm when i get home :)
 
The connector on the display should just ignore the 5v pin and just use the 2 center grounds and the 12v

 

 
cheers - very much appreciated if you can confirm.
Took a picture if this helps?
Looks like the connector it the same but will it work ok?
One of the pins says n/c is this not connected? Do I have to take that one out from the moles power
A little confused sorry

Cheers

Attached Files


Edited by talon, 27 August 2013 - 08:03 PM.


#705 talon

talon

    Hobbyist

  • Members
  • PipPip
  • 41 posts
  • Location:Near Manchester UK

  • Flag: England

  • Favorite Pinball: Medieval Madness

Posted 27 August 2013 - 08:16 PM

James - are u connecting it to a usb3 port? If so try a usb2 port on the mobo. Heard there can be compatibility issues with usb3

#706 james hellings

james hellings

    Hobbyist

  • Members
  • PipPip
  • 36 posts

  • Flag: United States of America

  • Favorite Pinball: vector

Posted 27 August 2013 - 08:46 PM

James - are u connecting it to a usb3 port? If so try a usb2 port on the mobo. Heard there can be compatibility issues with usb3

yes, have tried both, doesn't matter.  a big question i have is "how do you know if it's got everything it needs/installed right to run a table"?


Edited by james hellings, 27 August 2013 - 08:47 PM.


#707 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 27 August 2013 - 09:14 PM

Need to slighty rewire. Basically yellow on the molex is 12v but its on the wrong side of the dmd connector. So best thing to do is remove yellow wire and red wire. Leave red disconnected and pop the yellow on the 12v side.

So basically get ur molex cable swap over the red and yellow but leave red out.



When you plug the pinDMD in does windows do any thing? Do you get the usb ding? It must be showing up some where in device manager?

#708 james hellings

james hellings

    Hobbyist

  • Members
  • PipPip
  • 36 posts

  • Flag: United States of America

  • Favorite Pinball: vector

Posted 27 August 2013 - 11:08 PM

@james hellings

 

what os/mb are you running? unless your system recognizes the pinDMD nothing will work. Sounds like the os/mb combo does not ike the pinDMD :( Or usb drivers have not been installed properly.

 

I have found for these rare occasions its easiest to just put in a cheap pci usb card. Below is a known working car. It saves a lot of head aches!!!

http://www.ebay.co.u...cat=0&_from=R40

SUCCESS!  I just so happened to have one of those old usb boards and this did the trick.  thanks.



#709 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 28 August 2013 - 05:50 AM

Cool :) it saves so many head aches lol :)

#710 talon

talon

    Hobbyist

  • Members
  • PipPip
  • 41 posts
  • Location:Near Manchester UK

  • Flag: England

  • Favorite Pinball: Medieval Madness

Posted 28 August 2013 - 07:58 AM

superb many thanks RussDX

Gonna give it a try after work



#711 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 28 August 2013 - 08:01 AM

Once you have made the connector just double check every thing with a meter :)

Make sure the 2 middle pins are gnd and that the correct 12v pin is 12v :) (that matches up with the 12v on the display)



#712 talon

talon

    Hobbyist

  • Members
  • PipPip
  • 41 posts
  • Location:Near Manchester UK

  • Flag: England

  • Favorite Pinball: Medieval Madness

Posted 28 August 2013 - 11:44 AM

getting worried as i don't have a meter !!

i'll see if i can borrow one


Edited by talon, 28 August 2013 - 11:45 AM.


#713 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 28 August 2013 - 01:28 PM

Just leave the red wire off, and put the yellow wire in the connector the same side as its marked on the DMD connector (+12v)

 

Good to go!!! :)


Edited by russdx, 28 August 2013 - 01:28 PM.


#714 talon

talon

    Hobbyist

  • Members
  • PipPip
  • 41 posts
  • Location:Near Manchester UK

  • Flag: England

  • Favorite Pinball: Medieval Madness

Posted 28 August 2013 - 07:21 PM

Just leave the red wire off, and put the yellow wire in the connector the same side as its marked on the DMD connector (+12v)

 

Good to go!!! :)

 

It all works!!!!

Did exactly as you said Russdx.

It looks fantastic.

 

Many thanks to all especially Russdx and bosvrucht for their help 

 

gonna hopefully start a cab build thread soon.



#715 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 28 August 2013 - 09:11 PM

Cool :)

Although those displays are extremely expensive. They are so easy to get up and running and look amazing :)

#716 james hellings

james hellings

    Hobbyist

  • Members
  • PipPip
  • 36 posts

  • Flag: United States of America

  • Favorite Pinball: vector

Posted 03 September 2013 - 05:41 PM

Hey Russ.... got a new problem to solve now.  I had the dmd working great, unplugged everything, installed the computer and dmd into a new built cab and now am expriencing a weird issue with the display.  already talked to brett about this and based on what he's telling me the problem has to be with the board.  Here's the deal... the display now shows everything shifted downward so you don't see some of the lines at the bottom.  Also on occasion noticing words in an alien language or scrambled.  Even when the display is first turned on you see the word dmd cutoff about midway through so you only see the top of the word dmd... as an example.  currently running the firmware which came with... 598-16.dfu

 

any thoughts as to why it was working correctly prior to moving everything into a cabinet?  Only difference is now using an extension for the 4 pin connector since there is a longer distance to run from inside the cab where the pc sets and to the dmd.... bought a 6ft extension and also tried chaining some shorter ones but didn't make a difference.

 

edit... should have mentioned this too.  I've taken all the warnings about making sure there is power to the display first too heart.  when i first saw this warning I thought to myself this is not a good thing as it would be easy to make a mistake if your connection was not solid or a cable got pulled... regardless in all my attempts to prevent this i must confess we had a pin pulled out in the extension cable which was used to power and didn't realize this until after we powered everything on.  I'm wondering if our board is now defective?  Seems nuts that you can screw this board up this easily... please tell me i'm wrong.


Edited by james hellings, 03 September 2013 - 06:02 PM.


#717 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 03 September 2013 - 08:40 PM

Hello

 

Could you take some pictures / videos so I am clear on what's going on :)

 

 

The warning is VERY important hehe. XPIN and pinLED displays were designed as direct replacements for real pinball machines where the dmd will always be powered at the same time as the display driver. so they never get into this state!

 

Basically if the display is unpowered but still connected to the display driver (in this case the pinDMD) the dmd will try draw current from the io basically drawing up to 2amps through the pinDMD's gpio that are only meant to supply like 10ma lol. so if this happens it can fry the crap out of the pinDMD gpio :( Thats what the warning is for :)

 

You can return the pinDMD if you want and i can run some tests and see if its been damaged or if its another problem :)



#718 james hellings

james hellings

    Hobbyist

  • Members
  • PipPip
  • 36 posts

  • Flag: United States of America

  • Favorite Pinball: vector

Posted 03 September 2013 - 10:25 PM

Hello

 

Could you take some pictures / videos so I am clear on what's going on :)

 

 

The warning is VERY important hehe. XPIN and pinLED displays were designed as direct replacements for real pinball machines where the dmd will always be powered at the same time as the display driver. so they never get into this state!

 

Basically if the display is unpowered but still connected to the display driver (in this case the pinDMD) the dmd will try draw current from the io basically drawing up to 2amps through the pinDMD's gpio that are only meant to supply like 10ma lol. so if this happens it can fry the crap out of the pinDMD gpio :( Thats what the warning is for :)

 

You can return the pinDMD if you want and i can run some tests and see if its been damaged or if its another problem :)

Russ, just sent you a private message with video attached.



#719 talon

talon

    Hobbyist

  • Members
  • PipPip
  • 41 posts
  • Location:Near Manchester UK

  • Flag: England

  • Favorite Pinball: Medieval Madness

Posted 08 September 2013 - 01:43 PM

so I upgraded my pc a few days ago and I had problems getting the Pindmd to work.

I managed to get it working and thought I would share what I did in case anyone else has similar problems:

 

mobo is a gigabyte GA-Z87X-OC. The Pindmd is plugged into the far left usb ports when looking at the back of the mobo.

 

I originally installed all the relevant mobo drivers that came with the board and the Pindmd would only be recognised as a unknown device. The "windows can't verify the publisher of this driver software" did not come up if I tried to install. I uninstalled the unknown device in device manger and unplugged the Pindmd.

I uninstalled the usb3 drivers and plugged the Pindmd back in. It was recognised then as a Pindmd under "libusb-win32 devices", however it still would not work.

I uninstalled the Pindmd via the device manager and unplugged it then plugged it back in, this time the "windows can't verify the publisher of this driver software" appeared when I went through the update driver software via device manager. I tested a table and it worked.

 

I also reinstalled the mobo usb3 drivers and the pindmd is still working.

I have rebooted the pc to make sure its all working and I have not had any problems.

 

hope this may help someone.

 

cheers

Talon


Edited by talon, 08 September 2013 - 01:46 PM.


#720 james hellings

james hellings

    Hobbyist

  • Members
  • PipPip
  • 36 posts

  • Flag: United States of America

  • Favorite Pinball: vector

Posted 11 September 2013 - 03:11 PM

Russ,

 

i have run through the instructions to upgrade firmware.  I ran across a message during the process that was not covered in the instructions.  the message says .... your device was pluggen in dfu mode.  so it is impossible to make sure the file is correct for this device, I conitnued anyway.  the update said it was successful.  the device manager shows it as libusb-win32 devices btw....  at this time i do not know if the shifting problem has been fixed but will report shortly.


Edited by james hellings, 11 September 2013 - 07:19 PM.