63 replies to this topic

[brarnienim00]

OK. Will attempt later and keep people updated.

[fhjui]

I would say that are some things mixed and messed up in your DOF-installation.

When I analyze your screenshots you have 3 DOF parts, one for x86, one for x64, and one in the gobale directory c:\directoutput. That means 3 times directoutput.dll, that's one version too many.

At first as an example for a clean log for this table from my system:

---------------------------------------------------------------------------------
DirectOutput Version 3.1.8440.34788, built 2023.02.09 19:19
MJR Grander Unified DOF R3++ edition feat. Djrobx, Rambo3, and Freezy
DOF created by SwissLizard | https://github.com/mjrgh/DirectOutput
2025.04.24 00:18:39.779	DirectOutput Logger initialized
2025.04.24 00:18:39.684	Global config filename is "C:\VPINBALL\DIRECTOUTPUT-X64\config\GlobalConfig_B2SServer.xml"
2025.04.24 00:18:39.779	Global config loaded from: C:\VPINBALL\DIRECTOUTPUT-X64\config\GlobalConfig_B2SServer.xml
2025.04.24 00:18:39.779	Loading Pinball parts
2025.04.24 00:18:39.779	Loading cabinet
2025.04.24 00:18:39.781	Will load cabinet config file: C:\VPinball\DirectOutput-x64\Config\Cabinet.xml
2025.04.24 00:18:40.070	0 output controller defnitions and 0 toy definitions loaded from cabinet config.
2025.04.24 00:18:40.070	Cabinet config file has AutoConfig feature enabled. Calling AutoConfig.
2025.04.24 00:18:40.071	Cabinet auto configuration started
2025.04.24 00:18:40.164	Detected and added Pinscape Controller Nr. 1 with name Pinscape Controller 01
2025.04.24 00:18:40.165	Added LedwizEquivalent Nr. 51 with name Pinscape Controller 01 Equivalent for Pinscape Controller Nr. 1, 72
2025.04.24 00:18:40.175	PhilipsHueAutoConfigurator.AutoConfig started...note, actual connection detection will happen asynchronously, and device disabled if not succesfull (check further down in the log)
2025.04.24 00:18:40.185	LedWiz-like device at VID=64250, PID=240, product string=Pinscape Controller, manufacturer string=mjrnet
2025.04.24 00:18:40.185	HID caps: usage page=1, usage=4, number of link collection nodes=1, output report byte length=9
2025.04.24 00:18:40.187	LedWiz-like device at VID=3141, PID=28928, product string=USB Device, manufacturer string=SONiX
2025.04.24 00:18:40.188	LedWiz-like device at VID=64250, PID=240, product string=Pinscape Controller, manufacturer string=mjrnet
2025.04.24 00:18:40.188	HID caps: usage page=12, usage=1, number of link collection nodes=1, output report byte length=0
2025.04.24 00:18:40.193	Opening 64-bit LedWiz driver...
2025.04.24 00:18:40.194	Detected and added LedWiz Nr. 1 with name LedWiz 01
2025.04.24 00:18:40.194	Added LedwizEquivalent Nr. 1 with name LedWiz 01 Equivalent for Ledwiz Nr. 1
2025.04.24 00:18:40.201	Cabinet auto configuration finished
2025.04.24 00:18:40.201	Autoconfig complete.
2025.04.24 00:18:40.201	Cabinet config loaded successfully from C:\VPinball\DirectOutput-x64\Config\Cabinet.xml
2025.04.24 00:18:40.201	Cabinet loaded
2025.04.24 00:18:40.201	Loading table config
2025.04.24 00:18:40.202	Warning: No table config file found. Will try to load config from LedControl file(s).
2025.04.24 00:18:40.202	Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName t2_l8
2025.04.24 00:18:40.206	Loading LedControl file C:\VPinball\DirectOutput-x64\Config\directoutputconfig51.ini
2025.04.24 00:18:40.220	Min DOF Version is 0.8 for file directoutputconfig51.ini
2025.04.24 00:18:40.220	Resolving Tables Variables
2025.04.24 00:18:40.223	Resolving Global Variables
2025.04.24 00:18:41.233	1 directoutputconfig.ini or ledcontrol.ini files loaded.
2025.04.24 00:18:41.236	Config for RomName t2_l8 exists in LedControl data. Updating cabinet and config.
2025.04.24 00:18:41.298	Table config loading finished: romname=t2_l8, tablename=Terminator 2 (Williams 1991) g5k 1.25
2025.04.24 00:18:41.300	Pinball parts loaded
2025.04.24 00:18:41.300	Starting processes
2025.04.24 00:18:41.300	Initializing cabinet
2025.04.24 00:18:41.301	Debug: Initializing output controllers
2025.04.24 00:18:41.303	Pinscape Pinscape Controller 01 intialized and updater thread started.
2025.04.24 00:18:41.304	Debug: Initializing LedWiz Nr. 01
2025.04.24 00:18:41.306	LedWiz Nr. 01 initialized and updater thread initialized.
2025.04.24 00:18:41.306	Debug: Output controllers initialized
2025.04.24 00:18:41.307	Pinscape Pinscape Controller 01 updater thread  started.
2025.04.24 00:18:41.307	Pinscape Pinscape Controller 01 updater thread  has connected to Pinscape Pinscape Controller 01.
2025.04.24 00:18:41.307	Updater thread for LedWiz 01 started.
2025.04.24 00:18:41.312	Cabinet initialized
2025.04.24 00:18:41.320	Loading shape definition file: C:\VPINBALL\DIRECTOUTPUT-X64\DirectOutputShapes.xml
2025.04.24 00:18:41.400	Framework initialized.
2025.04.24 00:18:41.400	Have fun! :)
2025.04.24 00:19:36.986	Finishing framework
2025.04.24 00:19:36.989	Finishing cabinet
2025.04.24 00:19:36.991	Debug: Finishing output controllers
2025.04.24 00:19:36.999	Pinscape Pinscape Controller 01 updater thread  has disconnected from Pinscape Pinscape Controller 01 and will terminate.
2025.04.24 00:19:37.000	Pinscape Pinscape Controller 01 finished and updater thread stopped.
2025.04.24 00:19:37.000	Debug: Finishing LedWiz Nr. 01
2025.04.24 00:19:37.001	Updater thread for LedWiz 01 terminated.
2025.04.24 00:19:37.014	LedWiz Nr. 01 finished and updater thread stopped.
2025.04.24 00:19:37.014	Debug: Output controllers finished
2025.04.24 00:19:37.014	Cabinet finished
2025.04.24 00:19:37.014	DirectOutput framework finished.
2025.04.24 00:19:37.014	Bye and thanks for using!

I have installed in other dirs and only pinscape with KL25z controller, and an older DOF-version, but that doesn't matter.

Some hints:

• The config files should be only in the 2 config directories.
• the directoutputconfig51.ini belongs to the KL25z, the directoutputconfig30.ini to your LED controller WS2811 or something similar.
  this file seems to be wrong.
• For test only I would remove the configuration of the WS2811 from the dof-configtool. (you can create a new cabinet config.)
  then run this table and check the log for errors.

But something in your log irritates me:

there is a LedWiz number 8 detected. Do you have installed an add. LedWiz controller? If that is the emulated LedWiz of the KL25z ist should be LedWiz with number 1.

 

And its should be checked if this error occurs only with DOF-64bit or also with DOF-32bit: run VPX10.8-32bit and play this table. Check if DOF works then.

But no matter what the result is, DOF should be reinstalled cleanly.
 

[brarnienim00]

OK. thanks for the tips. I will attempt to fix up soon 

[brarnienim00]

About to try it now. My only problem is I got no idea what I originally done. Have now deleted the Directuutput folder, now ready to start. If someone wanted to use team viewer, I am more than willing for someone to do this.

Anyway here I go.

[fhjui]

Before reinstalling, check the path entered by DOF in the registry and, ideally, delete this entry completely. "HKEY_CURRENT_USER\Software\DirectOutput"

Then follow mjr's instructions for DOF on his website http://mjrnet.org/pi...ll-updates.html

There is also a DOF tester http://mjrnet.org/pi...e/doftest3.html

 

For backup of registry keys I have written a small batch file: (description in my docus)

REM Backup of the most important Registrykeys for Vpin-Software as File export
REM all keys are from the User-hive HKCU, they are valid for the just loggedin user

@echo off

REM system language independent use of date/time
for /f %%x in ('wmic path win32_localtime get /format:list ^| findstr "="') do set %%x
REM Format that leading "0" will be added, if necessary
if "%Month:~1,1%"==""   set Month=0%Month%
if "%Day:~1,1%"==""     set Day=0%Day%
if "%Hour:~1,1%"==""    set Hour=0%Hour%
if "%Minute:~1,1%"==""  set Minute=0%Minute%
if "%Second:~1,1%"==""  set Second=0%Second%

REM build date and time-string: YYYY-MM-DD_HH-MM-SS
set MYDATE=%Year%.%Month%.%Day%
set MYTIME=%Hour%-%Minute%-%Second%
set DateTime=%MYDATE%_%MYTIME%

REM every time a new directory is created for the exported keys and log files
mkdir %DateTime%


start /wait reg export HKCU\SOFTWARE\DirectOutput %DateTime%\DirectOutput.reg /Y
start /wait reg export HKCU\SOFTWARE\DOFLinx %DateTime%\DOFLinx.reg /Y
start /wait reg export "HKCU\SOFTWARE\Future Pinball" %DateTime%\FuturePinball.reg /y
start /wait reg export HKCU\SOFTWARE\Freeware %DateTime%\VPinMAME.reg /y
start /wait reg export HKCU\SOFTWARE\PinUPPopper %DateTime%\PinUPPopper.reg /y
start /wait reg export HKCU\SOFTWARE\UltraDMD %DateTime%\UltraDMD.reg /y
start /wait reg export HKCU\SOFTWARE\Valve %DateTime%\Steam.reg /y
start /wait reg export "HKCU\SOFTWARE\Visual Pinball" %DateTime%\VisualPinball.reg /y

REM save VPinballX.ini
copy %APPDATA%\VPinballX\VPinballX.ini %DateTime%\VPinballX.ini

Edited by fhjui, 25 April 2025 - 08:22 AM.

[brarnienim00]

OK. Not sure what you meant above, but the  deleted the directoutput from the registry as instructed. No change.

I have now reinstalled DOF from scratch. I still have exactly the same problem. One example is: Terminator 2 g5k v1.1d Everything works fine on this table. However Terminator 2 g5k v1.25 has the Slingshots and Ball Return only working. It seems to be a bit of a doozy. Also all the table listed from my very 1st post in here are still the same. Any idea what I could be missing.

[brarnienim00]

I don't know if this will help or not. But link below are some screenshots of my KL25Z config.

 

http://vpforums.org/...t/125/kl25z.jpg

http://vpforums.org/...125/kl25z-1.jpg

http://vpforums.org/...125/kl25z-2.jpg

http://vpforums.org/...125/kl25z-2.jpg

[brarnienim00]

There has to be some sort of common denominator here with this DOF problem. The one thing I keep thinking is: What is the difference is between the 2 versions of the Terminator 2 tables (version g5k1.1d which works perfect, but version g5k version 1.25 has slingshot and ball return only working), I am very certain this cannot be some sort of random thing going on.

So all you people's out there consider this as some sort of a challenge to solve, ( not just to help me, but also others). I still believe this sort of thing has to be happening to other people, so solving this is going to be very beneficial.

Just to recap. I completely uninstalled DOF. removed registry entries mentioned above. Then done a fresh DOF install with the latest 32 & 64 bit versions. The 4 files generated from the website reside directly under the DirectOutput folder. So iI guess at the moment with ????????

[Outhere]

What 4 files are they?

If you run the two games with the 32-bit VP and the 64-bit do they act the same

Edited by Outhere, 28 April 2025 - 04:34 AM.

[brarnienim00]

 These are the4 files generated from dof website. using  the config from KL25z pictures above (26/0425 at 5.14pm)

 

directoutputconfig51.ini

DirectOutputShapes.png

DirectOutputShapes.xml

tablemappings.xml

 

I cannot run the tables in x32, they load, but when executing to play there are script errors, so they will not run.

[brarnienim00]

These are screenshots of my settings from Configtool Website. Hope the helps somehow

 

http://vpforums.org/...vicewebsite.jpg

 

http://vpforums.org/...ssignments0.jpg

[Outhere]

If you still have this file directoutputconfig30.ini in your directoutput folder remove it

Edited by Outhere, 28 April 2025 - 11:33 PM.

[brarnienim00]

Not there. searched entire c: drive for directoutpu30.ini

Nowhere to be found.

[Outhere]

Post a log from the working Terminator and post Another Log from the partial working Terminator

[brarnienim00]

DirectOutpt.log for.      Terminator 2 version g5k 1.1d        ( its in the Tables Directory by the way) 

(i did notice lest slingshot not working) I think everything else is OK.

DirectOutput Framework - Version 3.2.9219.33016, x64-Release, built 2025.03.29 18:20
DOF created by SwissLizard / MIT License
MJR Grander Unified DOF R3++ edition feat. Djrobx, Rambo3, Vroonsh, CSD, and Freezy
https://github.com/mjrgh/DirectOutput
2025.04.29 09:46:57.927	DirectOutput logger initialized
2025.04.29 09:46:57.918	Install folder lookup: assembly: C:\DIRECTOUTPUT\X64\DIRECTOUTPUT.dll, install folder: C:\DIRECTOUTPUT (PARENT of the assembly folder -> new shared x86/x64 install)
2025.04.29 09:46:57.920	Global config file search: file not found, but Config folder will be used for other file searches (C:\DIRECTOUTPUT\Config)
2025.04.29 09:46:57.923	Loading global configuration from C:\DIRECTOUTPUT\Config\GlobalConfig_B2SServer.xml
2025.04.29 09:46:57.923	Error: Global config file "C:\DIRECTOUTPUT\Config\GlobalConfig_B2SServer.xml" does not exist; no global config loaded
2025.04.29 09:46:57.923	No global config file loaded
2025.04.29 09:46:57.925	Substitution variables: {DllDir}=C:\DIRECTOUTPUT; {InstallDir}=C:\DIRECTOUTPUT; {BinDir}=C:\DIRECTOUTPUT\X64; {TableDir}=C:\vPinball\VisualPinball\Tables; {TableName}=Terminator 2   (Williams1991) g5kv 1.1d; {RomName}=t2_l8
2025.04.29 09:46:57.927	Loading Pinball parts
2025.04.29 09:46:57.927	Loading cabinet
2025.04.29 09:46:57.927	Warning: No cabinet config file loaded. Will use AutoConfig.
2025.04.29 09:46:57.927	Cabinet auto configuration started
2025.04.29 09:46:58.046	Detected and added Pinscape Controller (KL25Z) #1 with name Pinscape Controller 01
2025.04.29 09:46:58.046	Added LedWizEquivalent #51 with name Pinscape Controller 01 Equivalent for Pinscape Controller (KL25Z) #1, 22 output ports
2025.04.29 09:46:58.263	PhilipsHueAutoConfigurator.AutoConfig started...note, actual connection detection will happen asynchronously, and device disabled if not succesfull (check further down in the log)
2025.04.29 09:46:58.315	LedWiz discovery: recognition tests passed for "Pinscape Controller" (VID/PID FAFA/00F7, manufacturer mjrnet) as LW unit #8; recognized by LedWiz vendor ID
2025.04.29 09:46:58.325	Opening 64-bit LedWiz driver...
2025.04.29 09:46:58.326	Detected and added LedWiz Nr. 8 with name LedWiz 08
2025.04.29 09:46:58.326	Added LedwizEquivalent Nr. 8 with name LedWiz 08 Equivalent for Ledwiz Nr. 8
2025.04.29 09:46:58.366	Cabinet auto configuration finished
2025.04.29 09:46:58.366	Cabinet loaded
2025.04.29 09:46:58.366	Loading table config
2025.04.29 09:46:58.367	Warning: No table config file found. Will try to load config from LedControl file(s).
2025.04.29 09:46:58.367	Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName t2_l8
2025.04.29 09:46:58.371	Loading LedControl file C:\DIRECTOUTPUT\Config\directoutputconfig51.ini
2025.04.29 09:46:58.382	Min DOF Version is 0.8 for file directoutputconfig51.ini
2025.04.29 09:46:58.382	Resolving Tables Variables (C:\DIRECTOUTPUT\Config\directoutputconfig51.ini)
2025.04.29 09:46:58.383	Resolving Global Variables (C:\DIRECTOUTPUT\Config\directoutputconfig51.ini)
2025.04.29 09:46:58.505	EXCEPTION: Table with ShortRomName FunFest_1973 has already been loaded (Exists more than once in ledcontrol file).
2025.04.29 09:46:58.505	EXCEPTION: Thread: 
2025.04.29 09:46:58.539	1 directoutputconfig.ini or ledcontrol.ini files loaded.
2025.04.29 09:46:58.540	Config for RomName t2_l8 exists in LedControl data. Updating cabinet and config.
2025.04.29 09:46:58.566	Table config loading finished: romname=t2_l8, tablename=Terminator 2   (Williams1991) g5kv 1.1d
2025.04.29 09:46:58.567	Pinball parts loaded
2025.04.29 09:46:58.567	Starting processes
2025.04.29 09:46:58.567	Initializing cabinet
2025.04.29 09:46:58.567	Initializing output controllers
2025.04.29 09:46:58.569	Pinscape "Pinscape Controller 01" initialized and updater thread started.
2025.04.29 09:46:58.569	Initializing LedWiz Nr. 08
2025.04.29 09:46:58.570	Pinscape "Pinscape Controller 01" updater thread started.
2025.04.29 09:46:58.570	Pinscape "Pinscape Controller 01" updater thread has connected to Pinscape "Pinscape Controller 01".
2025.04.29 09:46:58.570	LedWiz Nr. 08 initialized and updater thread initialized.
2025.04.29 09:46:58.570	Output controllers initialized
2025.04.29 09:46:58.571	Updater thread for LedWiz 08 started.
2025.04.29 09:46:58.574	Cabinet initialized
2025.04.29 09:46:58.577	Searching for DirectOutputShapes.xml in .ini file location (C:\DIRECTOUTPUT\Config): Success
2025.04.29 09:46:58.577	Loading shape definition file: C:\DIRECTOUTPUT\Config\DirectOutputShapes.xml
2025.04.29 09:46:58.631	Framework initialized.
2025.04.29 09:46:58.631	Have fun! :)
2025.04.29 09:51:07.204	Finishing framework
2025.04.29 09:51:07.206	Finishing cabinet
2025.04.29 09:51:07.207	Finishing output controllers
2025.04.29 09:51:07.209	Pinscape "Pinscape Controller 01" updater thread has disconnected from Pinscape "Pinscape Controller 01" and will terminate.
2025.04.29 09:51:07.210	Pinscape "Pinscape Controller 01" finished and updater thread stopped.
2025.04.29 09:51:07.210	Finishing LedWiz Nr. 08
2025.04.29 09:51:07.210	Updater thread for LedWiz 08 terminated.
2025.04.29 09:51:07.223	LedWiz Nr. 08 finished and updater thread stopped.
2025.04.29 09:51:07.223	Output controllers finished
2025.04.29 09:51:07.223	Cabinet finished
2025.04.29 09:51:07.223	DirectOutput framework finished.
2025.04.29 09:51:07.223	Bye and thanks for using!

[brarnienim00]

DirectOutput.log for    Terminator 2 version g5k 1.25      (log file is in tables directory by the way)

Nothing in DOF working, except for the Ball Return)

 

---------------------------------------------------------------------------------
DirectOutput Framework - Version 3.2.9219.33016, x64-Release, built 2025.03.29 18:20
DOF created by SwissLizard / MIT License
MJR Grander Unified DOF R3++ edition feat. Djrobx, Rambo3, Vroonsh, CSD, and Freezy
https://github.com/mjrgh/DirectOutput
2025.04.29 10:11:14.148	DirectOutput logger initialized
2025.04.29 10:11:14.140	Install folder lookup: assembly: C:\DIRECTOUTPUT\X64\DIRECTOUTPUT.dll, install folder: C:\DIRECTOUTPUT (PARENT of the assembly folder -> new shared x86/x64 install)
2025.04.29 10:11:14.141	Global config file search: file not found, but Config folder will be used for other file searches (C:\DIRECTOUTPUT\Config)
2025.04.29 10:11:14.144	Loading global configuration from C:\DIRECTOUTPUT\Config\GlobalConfig_B2SServer.xml
2025.04.29 10:11:14.145	Error: Global config file "C:\DIRECTOUTPUT\Config\GlobalConfig_B2SServer.xml" does not exist; no global config loaded
2025.04.29 10:11:14.145	No global config file loaded
2025.04.29 10:11:14.146	Substitution variables: {DllDir}=C:\DIRECTOUTPUT; {InstallDir}=C:\DIRECTOUTPUT; {BinDir}=C:\DIRECTOUTPUT\X64; {TableDir}=C:\vPinball\VisualPinball\Tables; {TableName}=Terminator 2 (Williams 1991) g5k 1.25; {RomName}=t2_l8
2025.04.29 10:11:14.148	Loading Pinball parts
2025.04.29 10:11:14.148	Loading cabinet
2025.04.29 10:11:14.149	Warning: No cabinet config file loaded. Will use AutoConfig.
2025.04.29 10:11:14.149	Cabinet auto configuration started
2025.04.29 10:11:14.260	Detected and added Pinscape Controller (KL25Z) #1 with name Pinscape Controller 01
2025.04.29 10:11:14.260	Added LedWizEquivalent #51 with name Pinscape Controller 01 Equivalent for Pinscape Controller (KL25Z) #1, 22 output ports
2025.04.29 10:11:14.481	PhilipsHueAutoConfigurator.AutoConfig started...note, actual connection detection will happen asynchronously, and device disabled if not succesfull (check further down in the log)
2025.04.29 10:11:14.534	LedWiz discovery: recognition tests passed for "Pinscape Controller" (VID/PID FAFA/00F7, manufacturer mjrnet) as LW unit #8; recognized by LedWiz vendor ID
2025.04.29 10:11:14.543	Opening 64-bit LedWiz driver...
2025.04.29 10:11:14.543	Detected and added LedWiz Nr. 8 with name LedWiz 08
2025.04.29 10:11:14.544	Added LedwizEquivalent Nr. 8 with name LedWiz 08 Equivalent for Ledwiz Nr. 8
2025.04.29 10:11:14.584	Cabinet auto configuration finished
2025.04.29 10:11:14.584	Cabinet loaded
2025.04.29 10:11:14.584	Loading table config
2025.04.29 10:11:14.584	Warning: No table config file found. Will try to load config from LedControl file(s).
2025.04.29 10:11:14.584	Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName t2_l8
2025.04.29 10:11:14.588	Loading LedControl file C:\DIRECTOUTPUT\Config\directoutputconfig51.ini
2025.04.29 10:11:14.591	Min DOF Version is 0.8 for file directoutputconfig51.ini
2025.04.29 10:11:14.591	Resolving Tables Variables (C:\DIRECTOUTPUT\Config\directoutputconfig51.ini)
2025.04.29 10:11:14.593	Resolving Global Variables (C:\DIRECTOUTPUT\Config\directoutputconfig51.ini)
2025.04.29 10:11:14.710	EXCEPTION: Table with ShortRomName FunFest_1973 has already been loaded (Exists more than once in ledcontrol file).
2025.04.29 10:11:14.710	EXCEPTION: Thread: 
2025.04.29 10:11:14.743	1 directoutputconfig.ini or ledcontrol.ini files loaded.
2025.04.29 10:11:14.745	Config for RomName t2_l8 exists in LedControl data. Updating cabinet and config.
2025.04.29 10:11:14.769	Table config loading finished: romname=t2_l8, tablename=Terminator 2 (Williams 1991) g5k 1.25
2025.04.29 10:11:14.770	Pinball parts loaded
2025.04.29 10:11:14.771	Starting processes
2025.04.29 10:11:14.771	Initializing cabinet
2025.04.29 10:11:14.771	Initializing output controllers
2025.04.29 10:11:14.772	Pinscape "Pinscape Controller 01" initialized and updater thread started.
2025.04.29 10:11:14.773	Initializing LedWiz Nr. 08
2025.04.29 10:11:14.774	Pinscape "Pinscape Controller 01" updater thread started.
2025.04.29 10:11:14.774	Pinscape "Pinscape Controller 01" updater thread has connected to Pinscape "Pinscape Controller 01".
2025.04.29 10:11:14.774	LedWiz Nr. 08 initialized and updater thread initialized.
2025.04.29 10:11:14.774	Output controllers initialized
2025.04.29 10:11:14.775	Updater thread for LedWiz 08 started.
2025.04.29 10:11:14.777	Cabinet initialized
2025.04.29 10:11:14.780	Searching for DirectOutputShapes.xml in .ini file location (C:\DIRECTOUTPUT\Config): Success
2025.04.29 10:11:14.780	Loading shape definition file: C:\DIRECTOUTPUT\Config\DirectOutputShapes.xml
2025.04.29 10:11:14.822	Framework initialized.
2025.04.29 10:11:14.822	Have fun! :)
2025.04.29 10:11:48.416	Finishing framework
2025.04.29 10:11:48.418	Finishing cabinet
2025.04.29 10:11:48.419	Finishing output controllers
2025.04.29 10:11:48.421	Pinscape "Pinscape Controller 01" updater thread has disconnected from Pinscape "Pinscape Controller 01" and will terminate.
2025.04.29 10:11:48.421	Pinscape "Pinscape Controller 01" finished and updater thread stopped.
2025.04.29 10:11:48.422	Finishing LedWiz Nr. 08
2025.04.29 10:11:48.422	Updater thread for LedWiz 08 terminated.
2025.04.29 10:11:48.435	LedWiz Nr. 08 finished and updater thread stopped.
2025.04.29 10:11:48.435	Output controllers finished
2025.04.29 10:11:48.435	Cabinet finished
2025.04.29 10:11:48.435	DirectOutput framework finished.
2025.04.29 10:11:48.435	Bye and thanks for using!

Edited by brarnienim00, 29 April 2025 - 02:09 AM.

[Outhere]

Try this
Move this File to the Config Folder
GlobalConfig_B2SServer.xml
Then post new Log

[brarnienim00]

DirectOutput Framework - Version 3.2.9219.33016, x64-Release, built 2025.03.29 18:20
DOF created by SwissLizard / MIT License
MJR Grander Unified DOF R3++ edition feat. Djrobx, Rambo3, Vroonsh, CSD, and Freezy
https://github.com/mjrgh/DirectOutput
2025.04.29 15:55:20.702	DirectOutput logger initialized
2025.04.29 15:55:20.679	Install folder lookup: assembly: C:\DIRECTOUTPUT\X64\DIRECTOUTPUT.dll, install folder: C:\DIRECTOUTPUT (PARENT of the assembly folder -> new shared x86/x64 install)
2025.04.29 15:55:20.680	Global config file lookup: found in Config folder: C:\DIRECTOUTPUT\Config\GlobalConfig_B2SServer.xml
2025.04.29 15:55:20.683	Loading global configuration from C:\DIRECTOUTPUT\Config\GlobalConfig_B2SServer.xml
2025.04.29 15:55:20.695	Global config successfully loaded from C:\DIRECTOUTPUT\Config\GlobalConfig_B2SServer.xml
2025.04.29 15:55:20.697	Substitution variables: {DllDir}=C:\DIRECTOUTPUT; {InstallDir}=C:\DIRECTOUTPUT; {BinDir}=C:\DIRECTOUTPUT\X64; {TableDir}=C:\vPinball\VisualPinball\Tables; {TableName}=Terminator 2   (Williams1991) g5kv 1.1d; {RomName}=t2_l8
2025.04.29 15:55:20.702	Loading Pinball parts
2025.04.29 15:55:20.702	Loading cabinet
2025.04.29 15:55:20.702	Warning: No cabinet config file loaded. Will use AutoConfig.
2025.04.29 15:55:20.703	Cabinet auto configuration started
2025.04.29 15:55:20.802	Detected and added Pinscape Controller (KL25Z) #1 with name Pinscape Controller 01
2025.04.29 15:55:20.802	Added LedWizEquivalent #51 with name Pinscape Controller 01 Equivalent for Pinscape Controller (KL25Z) #1, 22 output ports
2025.04.29 15:55:21.027	PhilipsHueAutoConfigurator.AutoConfig started...note, actual connection detection will happen asynchronously, and device disabled if not succesfull (check further down in the log)
2025.04.29 15:55:21.081	LedWiz discovery: recognition tests passed for "Pinscape Controller" (VID/PID FAFA/00F7, manufacturer mjrnet) as LW unit #8; recognized by LedWiz vendor ID
2025.04.29 15:55:21.091	Opening 64-bit LedWiz driver...
2025.04.29 15:55:21.091	Detected and added LedWiz Nr. 8 with name LedWiz 08
2025.04.29 15:55:21.092	Added LedwizEquivalent Nr. 8 with name LedWiz 08 Equivalent for Ledwiz Nr. 8
2025.04.29 15:55:21.134	Cabinet auto configuration finished
2025.04.29 15:55:21.134	Cabinet loaded
2025.04.29 15:55:21.134	Loading table config
2025.04.29 15:55:21.135	Warning: No table config file found. Will try to load config from LedControl file(s).
2025.04.29 15:55:21.135	Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName t2_l8
2025.04.29 15:55:21.141	Loading LedControl file C:\DIRECTOUTPUT\Config\directoutputconfig51.ini
2025.04.29 15:55:21.145	Min DOF Version is 0.8 for file directoutputconfig51.ini
2025.04.29 15:55:21.145	Resolving Tables Variables (C:\DIRECTOUTPUT\Config\directoutputconfig51.ini)
2025.04.29 15:55:21.147	Resolving Global Variables (C:\DIRECTOUTPUT\Config\directoutputconfig51.ini)
2025.04.29 15:55:21.294	EXCEPTION: Table with ShortRomName FunFest_1973 has already been loaded (Exists more than once in ledcontrol file).
2025.04.29 15:55:21.294	EXCEPTION: Thread: 
2025.04.29 15:55:21.333	1 directoutputconfig.ini or ledcontrol.ini files loaded.
2025.04.29 15:55:21.335	Config for RomName t2_l8 exists in LedControl data. Updating cabinet and config.
2025.04.29 15:55:21.368	Table config loading finished: romname=t2_l8, tablename=Terminator 2   (Williams1991) g5kv 1.1d
2025.04.29 15:55:21.369	Pinball parts loaded
2025.04.29 15:55:21.370	Starting processes
2025.04.29 15:55:21.370	Initializing cabinet
2025.04.29 15:55:21.370	Initializing output controllers
2025.04.29 15:55:21.371	Pinscape "Pinscape Controller 01" initialized and updater thread started.
2025.04.29 15:55:21.372	Initializing LedWiz Nr. 08
2025.04.29 15:55:21.373	Pinscape "Pinscape Controller 01" updater thread started.
2025.04.29 15:55:21.373	Pinscape "Pinscape Controller 01" updater thread has connected to Pinscape "Pinscape Controller 01".
2025.04.29 15:55:21.373	LedWiz Nr. 08 initialized and updater thread initialized.
2025.04.29 15:55:21.373	Output controllers initialized
2025.04.29 15:55:21.374	Updater thread for LedWiz 08 started.
2025.04.29 15:55:21.377	Cabinet initialized
2025.04.29 15:55:21.382	Searching for DirectOutputShapes.xml in .ini file location (C:\DIRECTOUTPUT\Config): Success
2025.04.29 15:55:21.382	Loading shape definition file: C:\DIRECTOUTPUT\Config\DirectOutputShapes.xml
2025.04.29 15:55:21.439	Framework initialized.
2025.04.29 15:55:21.439	Have fun! :)
2025.04.29 15:58:35.121	Finishing framework
2025.04.29 15:58:35.123	Finishing cabinet
2025.04.29 15:58:35.124	Finishing output controllers
2025.04.29 15:58:35.128	Pinscape "Pinscape Controller 01" updater thread has disconnected from Pinscape "Pinscape Controller 01" and will terminate.
2025.04.29 15:58:35.128	Pinscape "Pinscape Controller 01" finished and updater thread stopped.
2025.04.29 15:58:35.129	Finishing LedWiz Nr. 08
2025.04.29 15:58:35.129	Updater thread for LedWiz 08 terminated.
2025.04.29 15:58:35.141	LedWiz Nr. 08 finished and updater thread stopped.
2025.04.29 15:58:35.141	Output controllers finished
2025.04.29 15:58:35.141	Cabinet finished
2025.04.29 15:58:35.141	DirectOutput framework finished.
2025.04.29 15:58:35.141	Bye and thanks for using!

Moved GlobalConfig_B2SServer.xml to the Config Folder

DirectOutpt.log for.      Terminator 2 version g5k 1.1d      

(left slingshot still not working) I think everything else is OK.

[brarnienim00]

---------------------------------------------------------------------------------
DirectOutput Framework - Version 3.2.9219.33016, x64-Release, built 2025.03.29 18:20
DOF created by SwissLizard / MIT License
MJR Grander Unified DOF R3++ edition feat. Djrobx, Rambo3, Vroonsh, CSD, and Freezy
https://github.com/mjrgh/DirectOutput
2025.04.29 16:20:14.834	DirectOutput logger initialized
2025.04.29 16:20:14.815	Install folder lookup: assembly: C:\DIRECTOUTPUT\X64\DIRECTOUTPUT.dll, install folder: C:\DIRECTOUTPUT (PARENT of the assembly folder -> new shared x86/x64 install)
2025.04.29 16:20:14.816	Global config file lookup: found in Config folder: C:\DIRECTOUTPUT\Config\GlobalConfig_B2SServer.xml
2025.04.29 16:20:14.819	Loading global configuration from C:\DIRECTOUTPUT\Config\GlobalConfig_B2SServer.xml
2025.04.29 16:20:14.830	Global config successfully loaded from C:\DIRECTOUTPUT\Config\GlobalConfig_B2SServer.xml
2025.04.29 16:20:14.832	Substitution variables: {DllDir}=C:\DIRECTOUTPUT; {InstallDir}=C:\DIRECTOUTPUT; {BinDir}=C:\DIRECTOUTPUT\X64; {TableDir}=C:\vPinball\VisualPinball\Tables; {TableName}=Terminator 2 (Williams 1991) g5k 1.25; {RomName}=t2_l8
2025.04.29 16:20:14.834	Loading Pinball parts
2025.04.29 16:20:14.834	Loading cabinet
2025.04.29 16:20:14.834	Warning: No cabinet config file loaded. Will use AutoConfig.
2025.04.29 16:20:14.834	Cabinet auto configuration started
2025.04.29 16:20:14.933	Detected and added Pinscape Controller (KL25Z) #1 with name Pinscape Controller 01
2025.04.29 16:20:14.933	Added LedWizEquivalent #51 with name Pinscape Controller 01 Equivalent for Pinscape Controller (KL25Z) #1, 22 output ports
2025.04.29 16:20:15.155	PhilipsHueAutoConfigurator.AutoConfig started...note, actual connection detection will happen asynchronously, and device disabled if not succesfull (check further down in the log)
2025.04.29 16:20:15.208	LedWiz discovery: recognition tests passed for "Pinscape Controller" (VID/PID FAFA/00F7, manufacturer mjrnet) as LW unit #8; recognized by LedWiz vendor ID
2025.04.29 16:20:15.218	Opening 64-bit LedWiz driver...
2025.04.29 16:20:15.218	Detected and added LedWiz Nr. 8 with name LedWiz 08
2025.04.29 16:20:15.219	Added LedwizEquivalent Nr. 8 with name LedWiz 08 Equivalent for Ledwiz Nr. 8
2025.04.29 16:20:15.261	Cabinet auto configuration finished
2025.04.29 16:20:15.261	Cabinet loaded
2025.04.29 16:20:15.261	Loading table config
2025.04.29 16:20:15.261	Warning: No table config file found. Will try to load config from LedControl file(s).
2025.04.29 16:20:15.261	Will try to load configs from DirectOutput.ini or LedControl.ini file(s) for RomName t2_l8
2025.04.29 16:20:15.267	Loading LedControl file C:\DIRECTOUTPUT\Config\directoutputconfig51.ini
2025.04.29 16:20:15.271	Min DOF Version is 0.8 for file directoutputconfig51.ini
2025.04.29 16:20:15.271	Resolving Tables Variables (C:\DIRECTOUTPUT\Config\directoutputconfig51.ini)
2025.04.29 16:20:15.273	Resolving Global Variables (C:\DIRECTOUTPUT\Config\directoutputconfig51.ini)
2025.04.29 16:20:15.397	EXCEPTION: Table with ShortRomName FunFest_1973 has already been loaded (Exists more than once in ledcontrol file).
2025.04.29 16:20:15.397	EXCEPTION: Thread: 
2025.04.29 16:20:15.433	1 directoutputconfig.ini or ledcontrol.ini files loaded.
2025.04.29 16:20:15.435	Config for RomName t2_l8 exists in LedControl data. Updating cabinet and config.
2025.04.29 16:20:15.465	Table config loading finished: romname=t2_l8, tablename=Terminator 2 (Williams 1991) g5k 1.25
2025.04.29 16:20:15.466	Pinball parts loaded
2025.04.29 16:20:15.466	Starting processes
2025.04.29 16:20:15.467	Initializing cabinet
2025.04.29 16:20:15.467	Initializing output controllers
2025.04.29 16:20:15.468	Pinscape "Pinscape Controller 01" initialized and updater thread started.
2025.04.29 16:20:15.469	Initializing LedWiz Nr. 08
2025.04.29 16:20:15.470	Pinscape "Pinscape Controller 01" updater thread started.
2025.04.29 16:20:15.470	Pinscape "Pinscape Controller 01" updater thread has connected to Pinscape "Pinscape Controller 01".
2025.04.29 16:20:15.470	LedWiz Nr. 08 initialized and updater thread initialized.
2025.04.29 16:20:15.470	Output controllers initialized
2025.04.29 16:20:15.471	Updater thread for LedWiz 08 started.
2025.04.29 16:20:15.474	Cabinet initialized
2025.04.29 16:20:15.479	Searching for DirectOutputShapes.xml in .ini file location (C:\DIRECTOUTPUT\Config): Success
2025.04.29 16:20:15.479	Loading shape definition file: C:\DIRECTOUTPUT\Config\DirectOutputShapes.xml
2025.04.29 16:20:15.533	Framework initialized.
2025.04.29 16:20:15.533	Have fun! :)
2025.04.29 16:21:54.858	Finishing framework
2025.04.29 16:21:54.860	Finishing cabinet
2025.04.29 16:21:54.861	Finishing output controllers
2025.04.29 16:21:54.864	Pinscape "Pinscape Controller 01" updater thread has disconnected from Pinscape "Pinscape Controller 01" and will terminate.
2025.04.29 16:21:54.864	Pinscape "Pinscape Controller 01" finished and updater thread stopped.
2025.04.29 16:21:54.864	Finishing LedWiz Nr. 08
2025.04.29 16:21:54.864	Updater thread for LedWiz 08 terminated.
2025.04.29 16:21:54.878	LedWiz Nr. 08 finished and updater thread stopped.
2025.04.29 16:21:54.878	Output controllers finished
2025.04.29 16:21:54.878	Cabinet finished
2025.04.29 16:21:54.878	DirectOutput framework finished.
2025.04.29 16:21:54.878	Bye and thanks for using!

Directoutput log for    Terminator 2 version g5k 1.25

(Right slingshot and ball return working, nothing else)

Edited by brarnienim00, 29 April 2025 - 06:26 AM.

[Outhere]

Terminator 2 1.1 d should work in 10.7 32 Bit if it does not try redownloading it and trying it but it should work And 1.25 uses 10.8