Hi
I have the same behaviour and my main cab and even my test laptop and issues spent the last 3 days reading all these threads and DOF Link PDFs. Did anyone else have any issues or anything to add. I understand that there is no more DDH69 can do.
I turned off the LedWiz on my Pinscape even hashed out all the lines and brought in one at a time.
I have tried both7.14 and the beta 7.25 v4 (hence you will see me run both in the logs). using 7,14 I just get the error msg box it does at least try to go further in 7.25
Today I will research more the System.ComponentModel.Win32Exception (0x80004005) and let you know if I can get it going.
Just one question that I would like to ask. As I am not sure and never see it the logs how does DOF Links talk to the Teensy and send the MX out
I enclose the DOF log just in case you see anything I missed.
Thank you guys for all that you do :-)
28-Jul-21 21:05:09.277 - DOF Linx for Pinball Emulators - DOFLinx by DDH69
28-Jul-21 21:05:09.300 - Starting up - version 7.25 Beta 4
28-Jul-21 21:05:09.301 - For support come and visit the community here http://www.vpforums....p?showforum=104
28-Jul-21 21:05:09.304 - Pre-Reading DOFLinx.INI startup config file details
28-Jul-21 21:05:09.423 - DEBUG enabled with showing of window True
28-Jul-21 21:05:12.940 - Joystick # 1 detected : 32 buttons Z-Axis
28-Jul-21 21:05:12.945 - DOFLinx device: 1 Initializing as Pinscape #1 with name=Pinscape Controller
28-Jul-21 21:05:12.947 - DOFLinx device:1 Pinscape setup with 22 outputs
28-Jul-21 21:05:12.949 - DOFLinx device: 2 Initializing as LEDWiz #1 with ID=0
28-Jul-21 21:05:12.954 - DOFLinx device:2 LEDWiz setup with 32 outputs
28-Jul-21 21:05:12.958 - DOFLinx Device: 3 Initializing as FTDI (Sainsmart) #1 serial # A505FQSS
28-Jul-21 21:05:12.960 - DOFLinx device:3 FTDI (Sainsmart) setup with 8 outputs
28-Jul-21 21:05:12.964 - Reading DOFLinx.INI startup config file details
28-Jul-21 21:05:12.967 - Turning DEBUG off
28-Jul-21 21:05:12.997 - DEBUG enabled with showing of window True
28-Jul-21 21:05:13.005 - Reading DirectOutputConfig file named c:\DirectOutput\config\directoutputconfig.ini
28-Jul-21 21:05:13.283 - Set Debug Privilege = Set OK
28-Jul-21 21:05:30.413 - Found valid process name of 'Pinball FX3'
28-Jul-21 21:05:30.418 - Setting FX3 process ID to :10496
28-Jul-21 21:05:30.430 - Activated by process name : 'Pinball FX3'
28-Jul-21 21:05:30.435 - Named process detected and startup commenced
28-Jul-21 21:05:30.439 - DOFLinx device: 1 Initializing as Pinscape #1 with name=Pinscape Controller
28-Jul-21 21:05:30.443 - DOFLinx device:1 Pinscape setup with 22 outputs
28-Jul-21 21:05:30.446 - DOFLinx device: 2 Initializing as LEDWiz #1 with ID=0
28-Jul-21 21:05:30.450 - DOFLinx device:2 LEDWiz setup with 32 outputs
28-Jul-21 21:05:30.711 - DOFLinx Device: 3 Initializing as FTDI (Sainsmart) #1 serial # A505FQSS
28-Jul-21 21:05:30.716 - DOFLinx device:3 FTDI (Sainsmart) setup with 8 outputs
28-Jul-21 21:05:31.338 - Attempt # 1 Failed to get disk file name from FX3 process information
28-Jul-21 21:05:31.346 - System.ComponentModel.Win32Exception (0x80004005): Only part of a ReadProcessMemory or WriteProcessMemory request was completed
at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)
at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)
at System.Diagnostics.Process.get_MainModule()
at DOFLinx.MainForm.GetFX3EXEInfo()
28-Jul-21 21:05:31.953 - Attempt # 2 Failed to get disk file name from FX3 process information
28-Jul-21 21:05:31.961 - System.ComponentModel.Win32Exception (0x80004005): Only part of a ReadProcessMemory or WriteProcessMemory request was completed
at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)
at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)
at System.Diagnostics.Process.get_MainModule()
at DOFLinx.MainForm.GetFX3EXEInfo()
28-Jul-21 21:05:32.569 - Attempt # 3 Failed to get disk file name from FX3 process information
28-Jul-21 21:05:32.577 - System.ComponentModel.Win32Exception (0x80004005): Only part of a ReadProcessMemory or WriteProcessMemory request was completed
at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)
at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)
at System.Diagnostics.Process.get_MainModule()
at DOFLinx.MainForm.GetFX3EXEInfo()
28-Jul-21 21:05:33.185 - Attempt # 4 Failed to get disk file name from FX3 process information
28-Jul-21 21:05:33.194 - System.ComponentModel.Win32Exception (0x80004005): Only part of a ReadProcessMemory or WriteProcessMemory request was completed
at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)
at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)
at System.Diagnostics.Process.get_MainModule()
at DOFLinx.MainForm.GetFX3EXEInfo()
28-Jul-21 21:05:33.804 - Attempt # 5 Failed to get disk file name from FX3 process information
28-Jul-21 21:05:33.813 - System.ComponentModel.Win32Exception (0x80004005): Only part of a ReadProcessMemory or WriteProcessMemory request was completed
at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)
at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)
at System.Diagnostics.Process.get_MainModule()
at DOFLinx.MainForm.GetFX3EXEInfo()
28-Jul-21 21:05:34.421 - Attempt # 6 Failed to get disk file name from FX3 process information
28-Jul-21 21:05:34.431 - System.ComponentModel.Win32Exception (0x80004005): Only part of a ReadProcessMemory or WriteProcessMemory request was completed
at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)
at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)
at System.Diagnostics.Process.get_MainModule()
at DOFLinx.MainForm.GetFX3EXEInfo()
28-Jul-21 21:05:35.041 - Attempt # 7 Failed to get disk file name from FX3 process information
28-Jul-21 21:05:35.053 - System.ComponentModel.Win32Exception (0x80004005): Only part of a ReadProcessMemory or WriteProcessMemory request was completed
at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)
at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)
at System.Diagnostics.Process.get_MainModule()
at DOFLinx.MainForm.GetFX3EXEInfo()
28-Jul-21 21:05:35.665 - Attempt # 8 Failed to get disk file name from FX3 process information
28-Jul-21 21:05:35.676 - System.ComponentModel.Win32Exception (0x80004005): Only part of a ReadProcessMemory or WriteProcessMemory request was completed
at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)
at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)
at System.Diagnostics.Process.get_MainModule()
at DOFLinx.MainForm.GetFX3EXEInfo()
28-Jul-21 21:05:36.287 - Attempt # 9 Failed to get disk file name from FX3 process information
28-Jul-21 21:05:36.299 - System.ComponentModel.Win32Exception (0x80004005): Only part of a ReadProcessMemory or WriteProcessMemory request was completed
at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)
at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)
at System.Diagnostics.Process.get_MainModule()
at DOFLinx.MainForm.GetFX3EXEInfo()
28-Jul-21 21:05:36.913 - Attempt # 10 Failed to get disk file name from FX3 process information
28-Jul-21 21:05:36.914 - System.ComponentModel.Win32Exception (0x80004005): Only part of a ReadProcessMemory or WriteProcessMemory request was completed
at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)
at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)
at System.Diagnostics.Process.get_MainModule()
at DOFLinx.MainForm.GetFX3EXEInfo()
28-Jul-21 21:05:37.417 - FX3 information process failed to get key information from FX3.EXE ..... now disabling the link
28-Jul-21 21:05:37.420 - Using full colour palette
28-Jul-21 21:05:37.421 - 122 colours added to the palette
28-Jul-21 21:05:37.430 - Setting fixed RGB style of 'RANDOM' to colour to index=9999 with name=Random
28-Jul-21 21:10:35.921 - Activating process disappeared so stopping things
28-Jul-21 21:10:36.032 - Stopping DOF controllers due to 'Start Each Time' flag
28-Jul-21 21:23:16.502 - Shutting down
28-Jul-21 21:23:16.637 - Program close
29-Jul-21 09:22:19.004 - DOF Linx for Pinball Emulators - DOFLinx by DDH69
29-Jul-21 09:22:19.034 - Starting up - version 7.25 Beta 4
29-Jul-21 09:22:19.037 - For support come and visit the community here http://www.vpforums....p?showforum=104
29-Jul-21 09:22:19.041 - Pre-Reading DOFLinx.INI startup config file details
29-Jul-21 09:22:19.157 - DEBUG enabled with showing of window True
29-Jul-21 09:22:22.929 - Joystick # 1 detected : 32 buttons Z-Axis
29-Jul-21 09:22:22.934 - DOFLinx device: 1 Initializing as Pinscape #1 with name=Pinscape Controller
29-Jul-21 09:22:22.937 - DOFLinx device:1 Pinscape setup with 22 outputs
29-Jul-21 09:22:22.939 - DOFLinx device: 2 Initializing as LEDWiz #1 with ID=0
29-Jul-21 09:22:22.941 - DOFLinx device:2 LEDWiz setup with 32 outputs
29-Jul-21 09:22:22.945 - DOFLinx Device: 3 Initializing as FTDI (Sainsmart) #1 serial # A505FQSS
29-Jul-21 09:22:22.948 - DOFLinx device:3 FTDI (Sainsmart) setup with 8 outputs
29-Jul-21 09:22:22.952 - Reading DOFLinx.INI startup config file details
29-Jul-21 09:22:22.955 - Turning DEBUG off
29-Jul-21 09:22:22.983 - DEBUG enabled with showing of window True
29-Jul-21 09:22:22.990 - Reading DirectOutputConfig file named c:\DirectOutput\config\directoutputconfig.ini
29-Jul-21 09:22:23.268 - Set Debug Privilege = Set OK
29-Jul-21 09:22:45.595 - Found valid process name of 'Pinball FX3'
29-Jul-21 09:22:45.608 - Setting FX3 process ID to :4156
29-Jul-21 09:22:45.620 - Activated by process name : 'Pinball FX3'
29-Jul-21 09:22:45.626 - Named process detected and startup commenced
29-Jul-21 09:22:45.630 - DOFLinx device: 1 Initializing as Pinscape #1 with name=Pinscape Controller
29-Jul-21 09:22:45.635 - DOFLinx device:1 Pinscape setup with 22 outputs
29-Jul-21 09:22:45.640 - DOFLinx device: 2 Initializing as LEDWiz #1 with ID=0
29-Jul-21 09:22:45.645 - DOFLinx device:2 LEDWiz setup with 32 outputs
29-Jul-21 09:22:45.908 - DOFLinx Device: 3 Initializing as FTDI (Sainsmart) #1 serial # A505FQSS
29-Jul-21 09:22:45.914 - DOFLinx device:3 FTDI (Sainsmart) setup with 8 outputs
29-Jul-21 09:22:46.534 - Attempt # 1 Failed to get disk file name from FX3 process information
29-Jul-21 09:22:46.543 - System.ComponentModel.Win32Exception (0x80004005): Only part of a ReadProcessMemory or WriteProcessMemory request was completed
at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)
at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)
at System.Diagnostics.Process.get_MainModule()
at DOFLinx.MainForm.GetFX3EXEInfo()
29-Jul-21 09:22:47.155 - Attempt # 2 Failed to get disk file name from FX3 process information
29-Jul-21 09:22:47.162 - System.ComponentModel.Win32Exception (0x80004005): Only part of a ReadProcessMemory or WriteProcessMemory request was completed
at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)
at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)
at System.Diagnostics.Process.get_MainModule()
at DOFLinx.MainForm.GetFX3EXEInfo()
29-Jul-21 09:22:47.771 - Attempt # 3 Failed to get disk file name from FX3 process information
29-Jul-21 09:22:47.781 - System.ComponentModel.Win32Exception (0x80004005): Only part of a ReadProcessMemory or WriteProcessMemory request was completed
at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)
at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)
at System.Diagnostics.Process.get_MainModule()
at DOFLinx.MainForm.GetFX3EXEInfo()
29-Jul-21 09:22:48.390 - Attempt # 4 Failed to get disk file name from FX3 process information
29-Jul-21 09:22:48.398 - System.ComponentModel.Win32Exception (0x80004005): Only part of a ReadProcessMemory or WriteProcessMemory request was completed
at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)
at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)
at System.Diagnostics.Process.get_MainModule()
at DOFLinx.MainForm.GetFX3EXEInfo()
29-Jul-21 09:22:49.009 - Attempt # 5 Failed to get disk file name from FX3 process information
29-Jul-21 09:22:49.018 - System.ComponentModel.Win32Exception (0x80004005): Only part of a ReadProcessMemory or WriteProcessMemory request was completed
at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)
at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)
at System.Diagnostics.Process.get_MainModule()
at DOFLinx.MainForm.GetFX3EXEInfo()
29-Jul-21 09:22:49.630 - Attempt # 6 Failed to get disk file name from FX3 process information
29-Jul-21 09:22:49.640 - System.ComponentModel.Win32Exception (0x80004005): Only part of a ReadProcessMemory or WriteProcessMemory request was completed
at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)
at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)
at System.Diagnostics.Process.get_MainModule()
at DOFLinx.MainForm.GetFX3EXEInfo()
29-Jul-21 09:22:50.253 - Attempt # 7 Failed to get disk file name from FX3 process information
29-Jul-21 09:22:50.265 - System.ComponentModel.Win32Exception (0x80004005): Only part of a ReadProcessMemory or WriteProcessMemory request was completed
at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)
at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)
at System.Diagnostics.Process.get_MainModule()
at DOFLinx.MainForm.GetFX3EXEInfo()
29-Jul-21 09:22:50.878 - Attempt # 8 Failed to get disk file name from FX3 process information
29-Jul-21 09:22:50.889 - System.ComponentModel.Win32Exception (0x80004005): Only part of a ReadProcessMemory or WriteProcessMemory request was completed
at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)
at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)
at System.Diagnostics.Process.get_MainModule()
at DOFLinx.MainForm.GetFX3EXEInfo()
29-Jul-21 09:22:51.505 - Attempt # 9 Failed to get disk file name from FX3 process information
29-Jul-21 09:22:51.519 - System.ComponentModel.Win32Exception (0x80004005): Only part of a ReadProcessMemory or WriteProcessMemory request was completed
at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)
at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)
at System.Diagnostics.Process.get_MainModule()
at DOFLinx.MainForm.GetFX3EXEInfo()
29-Jul-21 09:22:52.133 - Attempt # 10 Failed to get disk file name from FX3 process information
29-Jul-21 09:22:52.135 - System.ComponentModel.Win32Exception (0x80004005): Only part of a ReadProcessMemory or WriteProcessMemory request was completed
at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)
at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)
at System.Diagnostics.Process.get_MainModule()
at DOFLinx.MainForm.GetFX3EXEInfo()
29-Jul-21 09:22:52.639 - FX3 information process failed to get key information from FX3.EXE ..... now disabling the link
29-Jul-21 09:22:52.642 - Using full colour palette
29-Jul-21 09:22:52.643 - 122 colours added to the palette
29-Jul-21 09:22:52.660 - Setting fixed RGB style of 'RANDOM' to colour to index=9999 with name=Random
29-Jul-21 09:23:20.064 - Activating process disappeared so stopping things
29-Jul-21 09:23:20.178 - Stopping DOF controllers due to 'Start Each Time' flag
29-Jul-21 09:33:32.904 - Shutting down
29-Jul-21 09:33:32.922 - Program close
29-Jul-21 09:33:40.042 - DOF Linx for Pinball Emulators - DOFLinx by DDH69
29-Jul-21 09:33:40.063 - Starting up - version 7.14
29-Jul-21 09:33:40.064 - For support come and visit the community here http://www.vpforums....p?showforum=104
29-Jul-21 09:33:40.068 - Pre-Reading DOFLinx.INI startup config file details
29-Jul-21 09:33:40.175 - DEBUG enabled with showing of window True
29-Jul-21 09:33:43.845 - Joystick # 1 detected : 32 buttons Z-Axis
29-Jul-21 09:33:43.849 - DOFLinx device: 1 Initializing as Pinscape #1 with name=Pinscape Controller
29-Jul-21 09:33:43.852 - DOFLinx device:1 Pinscape setup with 22 outputs
29-Jul-21 09:33:43.854 - DOFLinx device: 2 Initializing as LEDWiz #1 with ID=0
29-Jul-21 09:33:43.856 - DOFLinx device:2 LEDWiz setup with 32 outputs
29-Jul-21 09:33:43.860 - DOFLinx Device: 3 Initializing as FTDI (Sainsmart) #1 serial # A505FQSS
29-Jul-21 09:33:43.862 - DOFLinx device:3 FTDI (Sainsmart) setup with 8 outputs
29-Jul-21 09:33:43.866 - Reading DOFLinx.INI startup config file details
29-Jul-21 09:33:43.869 - Turning DEBUG off
29-Jul-21 09:33:43.896 - DEBUG enabled with showing of window True
29-Jul-21 09:33:43.904 - Reading DirectOutputConfig file named c:\DirectOutput\config\directoutputconfig.ini
29-Jul-21 09:33:44.186 - Set Debug Privilege = Set OK
29-Jul-21 09:33:51.376 - Found valid process name of 'Pinball FX3'
29-Jul-21 09:33:51.380 - Setting FX3 process ID to :11192
29-Jul-21 09:33:51.386 - Found valid process name of 'Pinball FX3'
29-Jul-21 09:33:51.390 - Setting FX3 process ID to :11192
29-Jul-21 09:33:51.402 - Activated by process name : 'Pinball FX3'
29-Jul-21 09:33:51.408 - Named process detected and startup commenced
29-Jul-21 09:33:51.413 - DOFLinx device: 1 Initializing as Pinscape #1 with name=Pinscape Controller
29-Jul-21 09:33:51.418 - DOFLinx device:1 Pinscape setup with 22 outputs
29-Jul-21 09:33:51.422 - DOFLinx device: 2 Initializing as LEDWiz #1 with ID=0
29-Jul-21 09:33:51.427 - DOFLinx device:2 LEDWiz setup with 32 outputs
29-Jul-21 09:33:51.688 - DOFLinx Device: 3 Initializing as FTDI (Sainsmart) #1 serial # A505FQSS
29-Jul-21 09:33:51.694 - DOFLinx device:3 FTDI (Sainsmart) setup with 8 outputs
29-Jul-21 09:34:25.083 - Shutting down
29-Jul-21 09:34:25.089 - Program close
29-Jul-21 09:34:59.362 - DOF Linx for Pinball Emulators - DOFLinx by DDH69
29-Jul-21 09:34:59.389 - Starting up - version 7.14
29-Jul-21 09:34:59.391 - For support come and visit the community here http://www.vpforums....p?showforum=104
29-Jul-21 09:34:59.394 - Pre-Reading DOFLinx.INI startup config file details
29-Jul-21 09:34:59.503 - DEBUG enabled with showing of window True
29-Jul-21 09:35:03.110 - Joystick # 1 detected : 32 buttons Z-Axis
29-Jul-21 09:35:03.115 - DOFLinx device: 1 Initializing as Pinscape #1 with name=Pinscape Controller
29-Jul-21 09:35:03.117 - DOFLinx device:1 Pinscape setup with 22 outputs
29-Jul-21 09:35:03.119 - DOFLinx device: 2 Initializing as LEDWiz #1 with ID=0
29-Jul-21 09:35:03.122 - DOFLinx device:2 LEDWiz setup with 32 outputs
29-Jul-21 09:35:03.125 - DOFLinx Device: 3 Initializing as FTDI (Sainsmart) #1 serial # A505FQSS
29-Jul-21 09:35:03.128 - DOFLinx device:3 FTDI (Sainsmart) setup with 8 outputs
29-Jul-21 09:35:03.132 - Reading DOFLinx.INI startup config file details
29-Jul-21 09:35:03.135 - Turning DEBUG off
29-Jul-21 09:35:03.164 - DEBUG enabled with showing of window True
29-Jul-21 09:35:03.172 - Reading DirectOutputConfig file named c:\DirectOutput\config\directoutputconfig.ini
29-Jul-21 09:35:03.448 - Set Debug Privilege = Set OK
29-Jul-21 09:35:32.205 - Found valid process name of 'Pinball FX3'
29-Jul-21 09:35:32.210 - Setting FX3 process ID to :7684
29-Jul-21 09:35:32.216 - Found valid process name of 'Pinball FX3'
29-Jul-21 09:35:32.220 - Setting FX3 process ID to :7684
29-Jul-21 09:35:32.232 - Activated by process name : 'Pinball FX3'
29-Jul-21 09:35:32.238 - Named process detected and startup commenced
29-Jul-21 09:35:32.243 - DOFLinx device: 1 Initializing as Pinscape #1 with name=Pinscape Controller
29-Jul-21 09:35:32.248 - DOFLinx device:1 Pinscape setup with 22 outputs
29-Jul-21 09:35:32.253 - DOFLinx device: 2 Initializing as LEDWiz #1 with ID=0
29-Jul-21 09:35:32.258 - DOFLinx device:2 LEDWiz setup with 32 outputs
29-Jul-21 09:35:32.521 - DOFLinx Device: 3 Initializing as FTDI (Sainsmart) #1 serial # A505FQSS
29-Jul-21 09:35:32.526 - DOFLinx device:3 FTDI (Sainsmart) setup with 8 outputs
29-Jul-21 09:35:37.535 - Shutting down
29-Jul-21 09:35:37.544 - Program close
29-Jul-21 09:36:24.600 - DOF Linx for Pinball Emulators - DOFLinx by DDH69
29-Jul-21 09:36:24.621 - Starting up - version 7.25 Beta 4
29-Jul-21 09:36:24.622 - For support come and visit the community here http://www.vpforums....p?showforum=104
29-Jul-21 09:36:24.626 - Pre-Reading DOFLinx.INI startup config file details
29-Jul-21 09:36:24.737 - DEBUG enabled with showing of window True
29-Jul-21 09:36:28.407 - Joystick # 1 detected : 32 buttons Z-Axis
29-Jul-21 09:36:28.412 - DOFLinx device: 1 Initializing as Pinscape #1 with name=Pinscape Controller
29-Jul-21 09:36:28.414 - DOFLinx device:1 Pinscape setup with 22 outputs
29-Jul-21 09:36:28.416 - DOFLinx device: 2 Initializing as LEDWiz #1 with ID=0
29-Jul-21 09:36:28.419 - DOFLinx device:2 LEDWiz setup with 32 outputs
29-Jul-21 09:36:28.422 - DOFLinx Device: 3 Initializing as FTDI (Sainsmart) #1 serial # A505FQSS
29-Jul-21 09:36:28.425 - DOFLinx device:3 FTDI (Sainsmart) setup with 8 outputs
29-Jul-21 09:36:28.429 - Reading DOFLinx.INI startup config file details
29-Jul-21 09:36:28.432 - Turning DEBUG off
29-Jul-21 09:36:28.463 - DEBUG enabled with showing of window True
29-Jul-21 09:36:28.471 - Reading DirectOutputConfig file named c:\DirectOutput\config\directoutputconfig.ini
29-Jul-21 09:36:28.748 - Set Debug Privilege = Set OK
29-Jul-21 09:37:12.641 - Shutting down
29-Jul-21 09:37:12.646 - Program close
Edited by Dazlin2000, 29 July 2021 - 08:41 AM.
Top
are all trademarks of VPFORUMS.