Jump to content



Photo
- - - - -

Buying first pins


  • Please log in to reply
65 replies to this topic

#41 Osprey101

Osprey101

    I get a custom title? COOL!

  • Members
  • PipPipPip
  • 248 posts
  • Location:Brookings, OR

  • Flag: United States of America

  • Favorite Pinball: Any EM!

Posted 31 July 2012 - 02:37 PM

QUOTE (Itchigo @ Jul 30 2012, 08:50 PM) <{POST_SNAPBACK}>
I used to shop games being in the buisness back in the day. I cleaned the playfield, removing all plastics, adjusted and cleaned all playfield contacts with an emery board, cleaned all rubbers with glass cleaner and a paper towel. I replaced them if they were looked old. For flippers clean the underside contact with an emery board or metal nail file enough to get a good contact. Unless you have a weak coil- this is all you need to do! My games were tournament quility- and I know, I used to play tournaments in the day. It's not rocket science although I did have a Gottlieb Volcano at a location - so fast, that even with 3 rubbers on the slingshot plastics- the ball would still lodge itself under the slingshot plastics. Now THAT'S what I'm talking about!! dblthumb.gif


NEVER use an emery board or metal nail file.
Use a plain, uncoated business card. If you must get aggressive, use 600 grit sandpaper or order a real Flexstone contact file.

#42 Itchigo

Itchigo

    Pinball Wizard

  • Members
  • PipPipPipPipPip
  • 2,782 posts
  • Location:Chicago, Illinois

  • Flag: United States of America

  • Favorite Pinball: All




  • Trophies:

Posted 31 July 2012 - 03:10 PM

I'm not familiar with the "new" contacts. I was out of the buis in the early 90's. And yes, you can- if your careful. You don't need to sand it smooth, you just need a good clean flat contact, particularly for flippercoils.

QUOTE (Matt Rasmussen @ Jul 29 2012, 07:42 PM) <{POST_SNAPBACK}>
Do you guys think this is just dirt and should clean up nicely with some Novus 1/2 etc?



I would think so. As long as you have no bad paint, and everything works strong, then it's just cleaning.

Founder of Rogue Pinball! https://roguepinball.com/index.php                 Making Pinball great again!!

 

partylikeits1776-.jpg


#43 Osprey101

Osprey101

    I get a custom title? COOL!

  • Members
  • PipPipPip
  • 248 posts
  • Location:Brookings, OR

  • Flag: United States of America

  • Favorite Pinball: Any EM!

Posted 31 July 2012 - 03:26 PM

QUOTE (Itchigo @ Jul 31 2012, 08:04 AM) <{POST_SNAPBACK}>
I'm not familiar with the "new" contacts. I was out of the buis in the early 90's. And yes, you can- if your careful. You don't need to sand it smooth, you just need a good clean flat contact, particularly for flippercoils.


Yes Itch, you can. But you shouldn't.
Most of the contacts have a fine coating of gold on them (yes, real gold) and you don't want to file that off. Other problems with using something too coarse is that it can roughen up the contacts, and misshape the contact points which is bad. Correct points are self-cleaning for the most part, due to the natural wiping action of the switch. If you make a bad angle on the contact points, that self-cleaning action will not work. The main reason points need to be cleaned is due to solenoid dust. That black grunge you clean off, is dust created by the operation of the solenoids. It comes from plungers and sleeves (and really just about anything else that moves), and is very fine so it can stick in odd places.

A machine that gets played regularly will rarely need many of the contacts cleaned, due to the wiping and self-cleaning action of the switch.

Back in the day, many vendors were new to the scene because it was making so much money. The problem is, many were not taught, and didn't take the time to learn, how to properly care for these machines. So they worked on the same principles they used when they worked on their cars. It wasn't intentional in most cases, it was just simple ignorance. The didn't know better.

And don't forget, not all contacts are flat.

Edited by Osprey101, 31 July 2012 - 03:28 PM.


#44 Itchigo

Itchigo

    Pinball Wizard

  • Members
  • PipPipPipPipPip
  • 2,782 posts
  • Location:Chicago, Illinois

  • Flag: United States of America

  • Favorite Pinball: All




  • Trophies:

Posted 31 July 2012 - 04:01 PM

That black dust is carbon which comes from the "arc" made during operation. It's different than dirt. As for the self cleaning thing you are correct. Most manufacturers placed a small tab in the center leaving the whole surface area around it for arcing. You really don't need an emery board- if you keep up with it. If it's pitted and corroded, then yes. If you keep up with it you can practically wipe it off with tp.

Edited by Itchigo, 31 July 2012 - 04:03 PM.

Founder of Rogue Pinball! https://roguepinball.com/index.php                 Making Pinball great again!!

 

partylikeits1776-.jpg


#45 rob046

rob046

    Often Emulated, Never Duplicated

  • Members
  • PipPipPipPipPip
  • 2,025 posts
  • Location:Central PA

  • Flag: United States of America

  • Favorite Pinball: 8 Ball Deluxe, ToM, & Funhouse



Posted 31 July 2012 - 05:27 PM

A while back I bought a very simple tool, a contact burnisher, for just a few bucks. It is a little more easier to work with than a business card, more effective, & lasts much longer. & it being an official tool I just feel better using it. I really never have switch problems due to dirty contacts though. It usually ends up being poorly adjusted switches that come out of whack over time.

#46 CaptainNeo

CaptainNeo

    Pinball Fan

  • Platinum Supporter
  • 782 posts
  • Location:Burlington, WI

  • Flag: United States of America

  • Favorite Pinball: Cirqus Voltaire

Posted 31 July 2012 - 06:45 PM

yea, another thing ops used to do back in the day is use WD40. Never ever use this on anything. Especially drop target banks. I was at a show in MI couple years ago, watching these 2 doofus's working on a Wizard. Spraying WD40 on stuff. I walked up and told him you guys shouldn't do that, your going to start that game on fire quickly. They said they do it all the time. Not even 30 min later, the entire lower relay bank was on fire. Told them so.


WD40 is absolute crap. You should not have it anywhere near pins for any reason ever! For you new guys out there.....Learn it...live it..love it! smile.gif


Visit my site, www.pinballrestorations.com for Pinball Playfield restoration services.
VP FS Wishlist {SafeCracker, Atlantis (redo), Defender, Arena, Champion Pub, Pinball Circus}

#47 Osprey101

Osprey101

    I get a custom title? COOL!

  • Members
  • PipPipPip
  • 248 posts
  • Location:Brookings, OR

  • Flag: United States of America

  • Favorite Pinball: Any EM!

Posted 01 August 2012 - 01:01 AM

QUOTE (CaptainNeo @ Jul 31 2012, 11:45 AM) <{POST_SNAPBACK}>
yea, another thing ops used to do back in the day is use WD40. Never ever use this on anything. Especially drop target banks. I was at a show in MI couple years ago, watching these 2 doofus's working on a Wizard. Spraying WD40 on stuff. I walked up and told him you guys shouldn't do that, your going to start that game on fire quickly. They said they do it all the time. Not even 30 min later, the entire lower relay bank was on fire. Told them so.


WD40 is absolute crap. You should not have it anywhere near pins for any reason ever! For you new guys out there.....Learn it...live it..love it! smile.gif


I will second this! NO WD40!!!
I have only been working on pins for about a year and a half and I learned the hard way. FIRE!!! Lucky for me, no damage was done as I caught it early enough.
Also, do not use aersol contact cleaner as it is also VERY flammable. Use electric motor cleaner. Non-flammable. And don't use either one if possible.
Very few parts on a pin get ANY lube at all. IF it gets lube, use a light coating of silicone lube.
If you are unsure what does, and what doesn't get lubricated, ASK!
Lubricating the wrong thing is only a short-term patch and does not correct the problem and down the road, makes more problems.
I went nuts with the lube when I got my first (non-working) pin. I then spent months, cleaning it all out.
DO NOT LUBE PLUNGERS.
DO NOT LUBE ANYTHING UNLESS YOU KNOW FOR A FACT, IT GETS LUBRICATED.

Itch, that dust may be from arcs, bit it is also dust from the various moving parts as well. Sorry to correct you, but it is just so the newbies know. But yes, I did forget the arcs. smile.gif

#48 Itchigo

Itchigo

    Pinball Wizard

  • Members
  • PipPipPipPipPip
  • 2,782 posts
  • Location:Chicago, Illinois

  • Flag: United States of America

  • Favorite Pinball: All




  • Trophies:

Posted 01 August 2012 - 12:32 PM

Not a problem Osprey as we've both worked on pins for many years. Here's my take: The carbon from the arc bonds to the surface and, like a spark plug, needs to be filed away periodically. Dust, (although I've never seen THAT much dust in a pin) will not bond to the surface, it will sit there. Dust, the little bit that can sit on the contacts, will burn off in the arc due to it's composition. It's light, and fluffy and would burn like a hair. In fact, most "dust" is nothing more than skin cells and hair particles (indoors). I've seen a dusty pin no doubt, but the ones I've seen the dust has all settled to the bottom floor. I've never seen more than a light coating attached to the bottom of the playfield.

Founder of Rogue Pinball! https://roguepinball.com/index.php                 Making Pinball great again!!

 

partylikeits1776-.jpg


#49 rob046

rob046

    Often Emulated, Never Duplicated

  • Members
  • PipPipPipPipPip
  • 2,025 posts
  • Location:Central PA

  • Flag: United States of America

  • Favorite Pinball: 8 Ball Deluxe, ToM, & Funhouse



Posted 01 August 2012 - 07:49 PM

Well FIRE is 1 issue, though these days (with the internet), anybody who reads even a basic pinball repair guide will be told not to use that stuff. Because it will also gunk up your parts over time. What it may nicely lube up right after using it will eventually turn into gunk & really slow things down. I have a tube a brain lube but even that should only be used on certain things. When it comes to pinball, the best lubes are actually dry. Like I think I have this dry carbon powder type of stuff somewhere that probably works better than WD40 without the negative side effects.

#50 Matt Rasmussen

Matt Rasmussen

    Hobbyist

  • Members
  • PipPip
  • 25 posts

  • Flag: ---------

  • Favorite Pinball: The Machine: Bride of Pinbot

Posted 02 August 2012 - 11:19 PM

So I think I've found my first two pins. Jurassic Park and Baywatch, I have to drive a little ways to pick them up, but I'm pretty pleased with the condition and function of them both. I'm excited to get them to their new home! cool.gif

I'll post pics once everything is all setup.

Edited by Matt Rasmussen, 02 August 2012 - 11:21 PM.


#51 CaptainNeo

CaptainNeo

    Pinball Fan

  • Platinum Supporter
  • 782 posts
  • Location:Burlington, WI

  • Flag: United States of America

  • Favorite Pinball: Cirqus Voltaire

Posted 03 August 2012 - 01:44 AM

JP is awesome. I have one and one of the best bangs for the buck..well used to be, but prices on JP have jumped up to the 2k range often now. If you found one for $1200ish. your golden. Baywatch is way underrated. Wish it had a better theme, but the gameplay and rules are phenomenal. Won't be disappointed with either one. With baywatch, make sure that display is bright and crisp. If it's getting weak on the bottom right corner, its not going to last long. Make sure there are no lines out of the display as well. look close. That's a $500 display if you need to replace one. not cheap.
Visit my site, www.pinballrestorations.com for Pinball Playfield restoration services.
VP FS Wishlist {SafeCracker, Atlantis (redo), Defender, Arena, Champion Pub, Pinball Circus}

#52 Matt Rasmussen

Matt Rasmussen

    Hobbyist

  • Members
  • PipPip
  • 25 posts

  • Flag: ---------

  • Favorite Pinball: The Machine: Bride of Pinbot

Posted 03 August 2012 - 03:24 AM

QUOTE (CaptainNeo @ Aug 3 2012, 01:44 AM) <{POST_SNAPBACK}>
JP is awesome. I have one and one of the best bangs for the buck..well used to be, but prices on JP have jumped up to the 2k range often now. If you found one for $1200ish. your golden. Baywatch is way underrated. Wish it had a better theme, but the gameplay and rules are phenomenal. Won't be disappointed with either one. With baywatch, make sure that display is bright and crisp. If it's getting weak on the bottom right corner, its not going to last long. Make sure there are no lines out of the display as well. look close. That's a $500 display if you need to replace one. not cheap.


I paid 1700 for each, you may think 'overpaid', but wait until you see the pictures. :-)


#53 CaptainNeo

CaptainNeo

    Pinball Fan

  • Platinum Supporter
  • 782 posts
  • Location:Burlington, WI

  • Flag: United States of America

  • Favorite Pinball: Cirqus Voltaire

Posted 03 August 2012 - 03:44 AM

you bought 2 games from him and still paid $1700 for each? I had my baywatch at $1500 and it looks like it came out of the box. Should have been $1500 for each if they are super fantastic looking. Make sure that dino is moving side to side and up and down right.
Visit my site, www.pinballrestorations.com for Pinball Playfield restoration services.
VP FS Wishlist {SafeCracker, Atlantis (redo), Defender, Arena, Champion Pub, Pinball Circus}

#54 Matt Rasmussen

Matt Rasmussen

    Hobbyist

  • Members
  • PipPip
  • 25 posts

  • Flag: ---------

  • Favorite Pinball: The Machine: Bride of Pinbot

Posted 03 August 2012 - 03:49 AM

I knew you'd say that neo, but you offered me your baywatch for 1600... :-)

I saw the pictures, not sure I'd say it came out of the box...lol. It's hard when you're both a seller and buyer, you kind of get goggles on to what real values are. But anyway, we'll discuss when you see the photographs of the machines when I get them home. :-)


#55 CaptainNeo

CaptainNeo

    Pinball Fan

  • Platinum Supporter
  • 782 posts
  • Location:Burlington, WI

  • Flag: United States of America

  • Favorite Pinball: Cirqus Voltaire

Posted 03 August 2012 - 03:56 AM

nah I had the Baywatch at $1500, TM at $800 and 1200 with all NOS stuff. which was 2700, then it was 3k shopped which I commented about basically $300 bonus for shopping it out. Besides the 2 nicks out of the head, the thing is so clean everywhere else, it does look like it came out of the box. now TM on the other hand. THat was used like old hooker.

smile.gif
neo

and if they are close by (no shipping no travel), that's worth a lot too, especially if both are freshly shopped and you don't have to do anything to either.

Edited by CaptainNeo, 03 August 2012 - 04:03 AM.

Visit my site, www.pinballrestorations.com for Pinball Playfield restoration services.
VP FS Wishlist {SafeCracker, Atlantis (redo), Defender, Arena, Champion Pub, Pinball Circus}

#56 rob046

rob046

    Often Emulated, Never Duplicated

  • Members
  • PipPipPipPipPip
  • 2,025 posts
  • Location:Central PA

  • Flag: United States of America

  • Favorite Pinball: 8 Ball Deluxe, ToM, & Funhouse



Posted 03 August 2012 - 04:07 AM

QUOTE (Matt Rasmussen @ Aug 2 2012, 07:19 PM) <{POST_SNAPBACK}>
So I think I've found my first two pins. Jurassic Park and Baywatch, I have to drive a little ways to pick them up, but I'm pretty pleased with the condition and function of them both. I'm excited to get them to their new home! cool.gif

I'll post pics once everything is all setup.


Neo is a hardcore buyer/seller/restorer. He means well, but his pinball world is a bit more hardcore than most of ours! Which is cool because I like having a guy like that around who knows so much much about real pins & how the market works. I know I'll gladly pay more as long as I'm avoiding some hassle & getting something nice that I want.
Though I'm also kind of fortunate in that I live in a nice pinball hub.

Just next weekend I only have to drive 2 hours to get to the PAPA warehouse. I live somewhat close to Allentown & York as well where there are some nice shows, & I live even closer to some of the New York/Niagara shows but I haven't gone to those. I kind of live in a City sandwitch. I live a couple hours from Buffalo, NY, a couple hours from Cleveland, a couple hours from Pittsburgh, & a few hours from Harrisburgh, & a little further is the whole Philly area, & a little further than that is the new york city area. I guess baltimore is in the mix as well. I usually won't go quite that far though. I can often find some nice games that I like within a few hours drive. I'd drive a little further though if I were dealing with say a $2200 game or more, I suppose.

Oh, & congrats! Neither of these titles are what you opened this thread thinking about, but hey whatever works for you. I kind of wish you would of got at least 1 Bally or Williams game as a first pin, as they are a little easier to get repair info & parts for, & they tend to hold up a little better. Though I can't really speak on DE or Sega as I haven't owned neither, I just go by what I'm told which is that they can feel a little cheap.
HOWEVER, JP is a great title, so I'm still jealous! & really that is the most important thing, getting a game you like, regardless.

I can't remember if I played Baywatch in real life. I can't say I'd pass on one if available. The large DMD is neat, & of course I grew up watching Baywatch while "moisturizing". Pam Anderson helped me get through puberty! Judging by pics & the VPM versions I've messed with, I really do like the layout. As for how it will do in a small collection (two), I don't know. But JP should certainly be decent. I have a feeling this isn't your last adventure with real pins though. Like you, I started with 2 pins, Hurricane & Stampede. & it wasn't 3 weeks later when I added my 3rd, Spy Hunter, & not even a year after that I brought in a trashed, dead Flash that I restored to like New. I don't have any of those games anymore as I upgraded a bit, but I still miss all of them to some extent.
You'll have fun with these, I'm sure.

#57 Matt Rasmussen

Matt Rasmussen

    Hobbyist

  • Members
  • PipPip
  • 25 posts

  • Flag: ---------

  • Favorite Pinball: The Machine: Bride of Pinbot

Posted 03 August 2012 - 04:20 AM

Oh, no, don't get me wrong, the captain has give great sage advice here and in private. Many thanks!

My eye is on The Getaway next, I'd love a whirlwind, but the ones I've checked out are pretty trashed for what they are asking. I took the advice of neo and went with a couple underrated games that have long playability, very wise advice!

#58 CaptainNeo

CaptainNeo

    Pinball Fan

  • Platinum Supporter
  • 782 posts
  • Location:Burlington, WI

  • Flag: United States of America

  • Favorite Pinball: Cirqus Voltaire

Posted 06 August 2012 - 05:55 PM

Don't be scared of DE/Sega/sterns. They all use the same parts since they are all the same company.

For those that do not know. Sega bought DE, Still used the same boards and flipper parts. During Sega's ownership, the advanced the board set to the white star system after the Large DMD pins were done (frankenstein, Batman forever, Baywatch and maverick). Then Sterns bought them from sega, continued with the same flipper mechanics, and continued to use the same whitestar boards up until, Sterns redesigned and went with the SAM system. So all the flipper rebuild parts, switches, lights, boards are readily available for all DE, Segas and Sterns. Pinball life carries everything you need.

Also, the Rev3 DE board is a direct ripoff of a Bally williams system 11 system. So if you know how to work on those, you can work on any DE game. Rev 3 boards will work in any DE, except the very first couple they released. Like torpedo alley and stuff like that.
Visit my site, www.pinballrestorations.com for Pinball Playfield restoration services.
VP FS Wishlist {SafeCracker, Atlantis (redo), Defender, Arena, Champion Pub, Pinball Circus}

#59 Matt Rasmussen

Matt Rasmussen

    Hobbyist

  • Members
  • PipPip
  • 25 posts

  • Flag: ---------

  • Favorite Pinball: The Machine: Bride of Pinbot

Posted 06 August 2012 - 10:30 PM

Here's a picture of my HSII in my garage for some cleanup...I LOVE this game! Fairly basic rules, but so far it's very difficult to get Redlight Mania, 5 speed loops while in 5th gear is a tough challenge to me. The DMD looks messed up because of how I took the picture, I have a Sony NEX-5N (I like photography too), and took it in a low light mode that combines 6 exposures into one sharp one, couldn't handle the changing DMD evidently. In reality, the DMD is brand new, along with the playfield glass.


Edited by Matt Rasmussen, 06 August 2012 - 10:35 PM.


#60 rob046

rob046

    Often Emulated, Never Duplicated

  • Members
  • PipPipPipPipPip
  • 2,025 posts
  • Location:Central PA

  • Flag: United States of America

  • Favorite Pinball: 8 Ball Deluxe, ToM, & Funhouse



Posted 06 August 2012 - 10:41 PM

Wow you just got your 1st pins & now you already got a 3rd! & here I thought I was quick doing this as it took me a few weeks to get my next game after my 1st 2 (which I also got at the same time). So what is the story here? Did you just hit the lottery or move into a house that had space you wanted & now you can get pins?

Very nice picture. I'm not a pro photographer by any means, but I take a ton of pinball pictures & have a decent 14 megapixel Canon that is pretty nice, can take amazing pics if you know how to adjust a few settings for the environment you are in. That is one thing about these days, is a lot of ppl just settle for the camera built into their phone. Such a shame, cuz now that camera's can do all these megapixels, people are now just using their phones anyhow.
In a few days I'll be in the PAPA warehouse with my camera, which should be fun. Though I also had the same camera there last year there is still some more pics I want to get.