Jump to content



Photo
* * * * * 2 votes

usb dot matrix driver board - who wants one?


  • Please log in to reply
1473 replies to this topic

#561 H4CK3R

H4CK3R

    Enthusiast

  • Silver Supporter
  • 185 posts

  • Flag: United States of America

  • Favorite Pinball: Tales from the Crypt

Posted 31 March 2012 - 03:02 PM

Anyway to use all 8 colors?

I got it to work with just 4, but, its alittle off, less detail

H4CK3R

#562 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 31 March 2012 - 03:28 PM

no sad.gif

the board does not support 8 colours only the 3 colours a real (pre sam) pinball machine would use
but maybe it will one day smile.gif








new VPinMAME.dll uploaded smile.gif Thanks snotz smile.gif
can grab from here VPinMAME.dll

this is the cabinent version smile.gif
it also has an extra com command
.ShowPinDMD = 1

1 = use pinDMD
0 = dont use pinDMD

if the table does not have this command added to the script the default is to use the pinDMD so i guess you only need to add .ShowPinDMD = 0 to the tables you dont want the pinDMD in use smile.gif

Edited by russdx, 31 March 2012 - 03:36 PM.


#563 Zablon

Zablon

    Pinball Fan

  • Members
  • PipPipPipPip
  • 642 posts

  • Flag: United States of America

  • Favorite Pinball: Funhouse

Posted 31 March 2012 - 03:47 PM

Awesome Thanks Russ! I'm using Photoshop CS5, I'll try out the new programs and see what happens. ---Works!! It took some work, but I went back in and cleaned up the picture. There were a few areas with "near black" colors that I hadn't noticed. This apparently screws up the color scheme so that it doesn't even work (except all on/off). After going through the pic with a fine tooth comb, now all is good.

As for your guys' lines. I know Russ had them in the same spot. Does anyone else have them? Do you have the same model # board? Those were the red segmented boards weren't they? Maybe it's a flaw in the LED board? Seems odd 2 of you would have the same line in the same spot if it was some random PC or PinDMD board issue and no one else does.

Edited by Zablon, 31 March 2012 - 05:15 PM.


#564 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 31 March 2012 - 04:03 PM

my board is a pinled display and there is a dead pixel causing the whole column to short out, definitely what is causing mine to have the line.

i can only assume thats the case for kruge99 board as well, maybe not a completely dead pixel but a half dead one or slightly broke shift register or somin. i cant see how the pinDMD could cause that one error by its self hehe.

kruge99 how many pixels across from the left is your ghost line?
ah looking back at your video, your line is in a different position to mine its further to the right, im 98% sure its a bad display!! hehe. but i cant confirm that without testing the display on another machine.

Edited by russdx, 31 March 2012 - 04:07 PM.


#565 kruge99

kruge99

    Pinball Wizard

  • VPF Staff
  • 3,901 posts
  • Location:Markham, Ont.

  • Flag: Canada

  • Favorite Pinball: Black Knight, High Speed and Pin*Bot



Posted 31 March 2012 - 04:34 PM

QUOTE (russdx @ Mar 31 2012, 11:03 AM) <{POST_SNAPBACK}>
my board is a pinled display and there is a dead pixel causing the whole column to short out, definitely what is causing mine to have the line.

i can only assume thats the case for kruge99 board as well, maybe not a completely dead pixel but a half dead one or slightly broke shift register or somin. i cant see how the pinDMD could cause that one error by its self hehe.

kruge99 how many pixels across from the left is your ghost line?
ah looking back at your video, your line is in a different position to mine its further to the right, im 98% sure its a bad display!! hehe. but i cant confirm that without testing the display on another machine.


The faint line is on column 21 of my display. Don't worry about exchanging the pinDMD usb board just yet, I'll ask someone in the Toronto pinball league to test it one time. Thanks for your help Russ!! dblthumb.gif


Best Regards,
Todd.

[proud owner of a Williams Solar Fire]

- It's called "The American Dream" because you have to be asleep to believe it.
George Carlin
- Truly great madness cannot be achieved without significant intelligence.
Henrik Tikkanen
- "Reality check, Michelle, Talk about composure, Total lack of. He's a man-- About-- 12 Feet Tall--"
Carrie Kelly
Posted Image

#566 gbeef

gbeef

    Enthusiast

  • Members
  • PipPipPip
  • 109 posts

  • Flag: ---------

  • Favorite Pinball: adams

Posted 31 March 2012 - 05:34 PM

I have a fuse question what should i be looking for?
for spec wise 1.5Amp is there any other information?
Because i bought some 1.5Amp but there blowing and the fuse wire looks really small. Im sure i bought the wrong ones.

Does anyone have a link?

Edited by gbeef, 31 March 2012 - 05:36 PM.


#567 chriz

chriz

    Enthusiast

  • Platinum Supporter
  • 451 posts

  • Flag: ---------

  • Favorite Pinball: Funhouse

Posted 31 March 2012 - 06:05 PM

use a 2A or 3A fuse, fast or mediumfast

cheers
Chris
 

 


#568 Arcade4

Arcade4

    Pinball Fan

  • Members
  • PipPipPipPip
  • 1,686 posts
  • Location:Beaumont, TX.

  • Flag: United States of America

  • Favorite Pinball: AC/DC

Posted 31 March 2012 - 06:10 PM

QUOTE (russdx @ Mar 31 2012, 11:03 AM) <{POST_SNAPBACK}>
my board is a pinled display and there is a dead pixel causing the whole column to short out, definitely what is causing mine to have the line.

i can only assume thats the case for kruge99 board as well, maybe not a completely dead pixel but a half dead one or slightly broke shift register or somin. i cant see how the pinDMD could cause that one error by its self hehe.

kruge99 how many pixels across from the left is your ghost line?
ah looking back at your video, your line is in a different position to mine its further to the right, im 98% sure its a bad display!! hehe. but i cant confirm that without testing the display on another machine.


I have the red segmented board, but I have not yet received my shipment of the pinDMD board to test it out yet.
Hopefully my DMD is fine. smile.gif


#569 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 31 March 2012 - 06:16 PM

the LEE-128G032 can draw up to 3amp the data sheet says all the other seam to be 1.5amp so if you have the LEE-128G032 you will need a larger fuse smile.gif

#570 kruge99

kruge99

    Pinball Wizard

  • VPF Staff
  • 3,901 posts
  • Location:Markham, Ont.

  • Flag: Canada

  • Favorite Pinball: Black Knight, High Speed and Pin*Bot



Posted 31 March 2012 - 07:30 PM

QUOTE (gbeef @ Mar 31 2012, 12:34 PM) <{POST_SNAPBACK}>
I have a fuse question what should i be looking for?
for spec wise 1.5Amp is there any other information?
Because i bought some 1.5Amp but there blowing and the fuse wire looks really small. Im sure i bought the wrong ones.

Does anyone have a link?


I used a 240V - 1.5A fast blow fuse - the size on the package 6.3x32mm (which I think measures out to about 1-1/4 inches)

If you are blowing fuses you should definitely measure the voltage and amps coming off of your power supply! You don't want to damage anything.


Best Regards,
Todd.
[proud owner of a Williams Solar Fire]

- It's called "The American Dream" because you have to be asleep to believe it.
George Carlin
- Truly great madness cannot be achieved without significant intelligence.
Henrik Tikkanen
- "Reality check, Michelle, Talk about composure, Total lack of. He's a man-- About-- 12 Feet Tall--"
Carrie Kelly
Posted Image

#571 gbeef

gbeef

    Enthusiast

  • Members
  • PipPipPip
  • 109 posts

  • Flag: ---------

  • Favorite Pinball: adams

Posted 31 March 2012 - 08:10 PM

QUOTE (kruge99 @ Mar 31 2012, 08:30 PM) <{POST_SNAPBACK}>
QUOTE (gbeef @ Mar 31 2012, 12:34 PM) <{POST_SNAPBACK}>
I have a fuse question what should i be looking for?
for spec wise 1.5Amp is there any other information?
Because i bought some 1.5Amp but there blowing and the fuse wire looks really small. Im sure i bought the wrong ones.

Does anyone have a link?


I used a 240V - 1.5A fast blow fuse - the size on the package 6.3x32mm (which I think measures out to about 1-1/4 inches)

If you are blowing fuses you should definitely measure the voltage and amps coming off of your power supply! You don't want to damage anything.


Best Regards,
Todd.




Ok i bought fuses did some measureing im getting 4.9V so thats not the issue the board inst turning on.sad.gif
There is a away to even this this board? can i plug it into a williams or bally machine?

#572 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 31 March 2012 - 08:13 PM

when you plug the pinDMD into your pc is windows recognize it? (making the usb ding sound) and is the green led on the board lighting up?

#573 gbeef

gbeef

    Enthusiast

  • Members
  • PipPipPip
  • 109 posts

  • Flag: ---------

  • Favorite Pinball: adams

Posted 31 March 2012 - 08:19 PM

QUOTE (russdx @ Mar 31 2012, 09:13 PM) <{POST_SNAPBACK}>
when you plug the pinDMD into your pc is windows recognize it? (making the usb ding sound) and is the green led on the board lighting up?



Yep the your board is green, the green light is on and ive installed the drivers. On 2 machines.

Edited by gbeef, 31 March 2012 - 08:20 PM.


#574 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 31 March 2012 - 08:21 PM

hmm you should be seeing the default pinDMD logo then

have you got a pinball machine you can test the DMD in?

#575 gbeef

gbeef

    Enthusiast

  • Members
  • PipPipPip
  • 109 posts

  • Flag: ---------

  • Favorite Pinball: adams

Posted 31 March 2012 - 08:39 PM

I dont,
im going to have to find someone locally:(
What machine can test this DMD on? like a bally or Williams board?
its should be just plug and play right?

#576 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 31 March 2012 - 08:46 PM

any pinball machine that uses a 128x32 can be used to test it

yes just plugging the dmd into the pinDMD and plugging the dmd into your usb will make it draw the default pinDMD logo onto the DMD

all pinDMD were working when i sent them not quite sure whats gone wrong here

Edited by russdx, 31 March 2012 - 09:27 PM.


#577 gbeef

gbeef

    Enthusiast

  • Members
  • PipPipPip
  • 109 posts

  • Flag: ---------

  • Favorite Pinball: adams

Posted 31 March 2012 - 08:49 PM

Ill test my DMD first and get back to you.

#578 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 31 March 2012 - 08:50 PM

cool smile.gif

#579 gbeef

gbeef

    Enthusiast

  • Members
  • PipPipPip
  • 109 posts

  • Flag: ---------

  • Favorite Pinball: adams

Posted 31 March 2012 - 09:04 PM

Just to make sure im not crazy.
Power goes here right.




#580 russdx

russdx

    Pinball Fan

  • VIP
  • 1,317 posts
  • Location:Bristol UK

  • Flag: United Kingdom

  • Favorite Pinball: NBAFB

Posted 31 March 2012 - 09:07 PM

yes that looks correct

and you can only plug the ribbon cable one way round on the display?


just reading your other post where it says its was blowing fuses. if its blowing fuses but not actually lit this does not sound good sad.gif sounds like some thing is shorting out on the display?

Edited by russdx, 31 March 2012 - 09:20 PM.