25 replies to this topic

[wiesshund]

I forgot to resave the table with 10.7 I was testing the latest revision to see if some bugs were fixed

 

There is nothing in the table that needs anything newer than 10.7, so it is save to save the table with 10.7 to remove the message.

that be funky that it reports 10.72 (since there isnt one)
toxie may need to look a bit more at that versioning stamp so it at least shows something valid that makes sense to people

 

that did the trick saving the table with my version, thanks a lot for your help!

 

I do the same thing, since i dont have a real cab (i just convert my desk into a 32" mini cab, and then put it back to work mode after)
i am usually running what ever the latest test build of everything is, then i will do something on a table for someone and forget to save it using the release exe.

If i had a real cab, i probably wouldnt be running it on what ever is the bleeding edge, 5 minutes ago built beta

[Mike DA Spike]

I made a modification to use FLEX DMD instead of VPINmame (As Vpinmame doesn't show this display correctly for me)
Based on scutters manual for replacing vpinmame for Flex DMD (and a lot of patience), I modified the script

The script has a switch to turn Flex DMD on or off (1 = on, 0 = off)

'Use Flex DMD instead of VpinMame
Const UseFlexDMD = 1

 
This is how it looks like on my real DMD 

Attached Files

•  Lap by Lap (Inder 1980).zip   9KB   4 downloads

Edited by Mike DA Spike, 31 May 2022 - 12:26 PM.

[jpsalas]

UPDATE

 

4.0.0 Updated 15.10.2022

- Updated to my VPX7 physics

- Updated my mechanical set of sounds to a more "under the glass" sound.

- Updated to my latest script routines.

 

This table was almost a v4 table, just a few minor changes here and there and it was ready

[jpsalas]

Nothing new in the update today, just a change in the date of the table from 1980 to 1986

[Mike DA Spike]

I made a modification to use FLEX DMD instead of VPINmame (As Vpinmame doesn't show this display correctly for me)
Based on scutters manual for replacing vpinmame for Flex DMD (and a lot of patience), I modified the script

The script has a switch to turn Flex DMD on or off (1 = on, 0 = off)

'Use Flex DMD instead of VpinMame
Const UseFlexDMD = 1

 
This is how it looks like on my real DMD 

 

Here's an updated script version of the FLEXDMD display
Just name the VBS the same as the table and it will show the flex DMD 



 

Attached Files

•  Lap by Lap (Inder 1980) v4.zip   9.07KB   7 downloads

[digitalarts]

thanks JP for the wonderwul table, and thanks Mike for the great flexdmd dmd