35 replies to this topic

[sammyvee]

Can anyone please share their POV settings for cabinet use?  Thanks.

[htamas]

Mine:   Judge Dredd (Bally 1993).zip   468bytes   20 downloads

[sammyvee]

Thanks htamas.

[Rajo Joey]

Here are my povs:
https://mega.nz/fold...qEETTLAkl-Lx9cQ

Gesendet von meinem CMR-W09 mit Tapatalk

[dondi]

@BrandonLaw & @Bigus. We have a weekly VP pinball competition over on the VP Discord and this week's table is v2.1 of JD. Several competitors are reporting the ball getting stuck and other issues. I think two of our competitors already posted on the download review page. We are tracking these and hopefully will be posting some more-detailed information on the issues that seem to be disrupting their gameplay entries. Thanks for your work on this table.

[bigus1]

I'm guessing the balls are getting airborne on the ramps, so I've modified them already but I'll give you time to provide more info before I post it. Thanks for the heads-up

[studlygoorite]

I'm guessing the balls are getting airborne on the ramps, so I've modified them already but I'll give you time to provide more info before I post it. Thanks for the heads-up

Hi Bigus1, I have had the balls get stuck outside the top right ramp  https://cdn.discorda...72/IMG_2689.jpg and also at the top of the multiball turnstile several times, seems to be only during high scoring games If you need more pics or info. let me know. 

Edited by studlygoorite, 27 June 2020 - 03:18 AM.

[bigus1]

There's a few machines at my local arcade that the owner has modified, in various playfield areas, with clear perspex because they kept needing the glass off to rescue balls - not technically a fault with the machine, but still pisses everybody off when it happens. Luckily, you can do a similar thing with VP

I'm testing my changes with my best power-shots atm - and getting good air - without any lost balls so far. Fingers crossed.

[studlygoorite]

Thanks for the update going to check it out now

[bolt]

Thank you for the update.

[STAT]

thanks for that

[STAT]

Is there any reason, why you don't use JD_L7 ROM ?

If you get no Sound with that, just download the one from VPU.

 

Another Question: someone can explain, what exactly is different with JD_D7 ROM (LED Ghost Fix) ?

Edited by STAT, 07 December 2020 - 10:19 AM.

[bigus1]

I just use whatever a table comes with. No preference on my part. So long as it works. I don't have a very flash setup, but I do know how to make a PC run slicker than a greased eel   i5-4570 8Gb GTX760  Samsung 305T 16:10

[wiesshund]

 

 

Another Question: someone can explain, what exactly is different with JD_D7 ROM (LED Ghost Fix) ?

 

It supposedly corrects the voltage bleed to LED's that are not supposed to be receiving power

so they dont phantom glow when they should be off.

 

 

[STAT]

bigus1: ok but that doesn't matter, which ROM are you using .- i recommend to Play with jd_l7 ROM, i think so because should be the latest ...

 

wiesshund: ok thanks, i thought so … so that is not a Benefit for all VP (LCD) Players, of course, Right ?

Edited by STAT, 08 December 2020 - 08:44 AM.

[wiesshund]

 

wiesshund: ok thanks, i thought so … so that is not a Benefit for all VP Players, of course, Right ?

To be honest, i cant tell a darned different
It may have more effect on a PinDMD?
It may also be because i use an LCD, so i have the dots set so off is flat out off 0 brightness

That warm LED glow on a DMD does not have quite the same effect on an LCD, just looks like someone bumped the airbrush
when it was loaded with orange paint