22 replies to this topic

[DDH69]

Looking at your post, I see nothing wrong with that.  Its not a heavily used function, so never doubt you've found a new issue!

 

Can you please:

1. Clear your DOFLinx.LOG, turn on DEBUG=1 or 2, then once DOFLinx is loaded (no need to have a game in play), then from the DOFLinx right-click menu select "Show Variables in LOG", post the LOG file

2. Post your INI file with the above commands

 

I'l take a look from there and report back.

[Baronir2d2]

I managed using these commands...

Thank you for your help, I was very helpful.

If you want, I'll post results with the machine I'm building.

 

 

DIRECTOUTPUTCONFIG=c:\DirectOutput\config\directoutputconfig.ini

PROCESSES=Pinball FX2,VPinballX,VPinball995,Pinball FX3,MK_AGP3_FINAL,notepad

 

 

#KEY_TO_OUTPUT=20,120,30,121

 

#L_FLIPPER_OUTPUT=103

#R_FLIPPER_OUTPUT=116

#L_FLIPPER_KEY=A0

#\R_FLIPPER_KEY=A1

 

KEY_TO_OUTPUT=X1ST,103,X1A,116,X1B,119,X1X,120,X1Y,121,X1DU,122,X1DD,123,X1DL,124

[DDH69]

 

I managed using these commands...

Thank you for your help, I was very helpful.

If you want, I'll post results with the machine I'm building.

 

 

DIRECTOUTPUTCONFIG=c:\DirectOutput\config\directoutputconfig.ini

PROCESSES=Pinball FX2,VPinballX,VPinball995,Pinball FX3,MK_AGP3_FINAL,notepad

 

 

#KEY_TO_OUTPUT=20,120,30,121

 

#L_FLIPPER_OUTPUT=103

#R_FLIPPER_OUTPUT=116

#L_FLIPPER_KEY=A0

#\R_FLIPPER_KEY=A1

 

KEY_TO_OUTPUT=X1ST,103,X1A,116,X1B,119,X1X,120,X1Y,121,X1DU,122,X1DD,123,X1DL,124

 

 

Good to hear.  Yes please post the results, always like to see the finished product.