42 replies to this topic

[DDH69]

All good.   I'm working on what I hope will be a solution now.

[DDH69]

Lasse, the attached v7.25 Beta 4 has code to try and attach 10x over 5 seconds to the EXE file associated with the detected FX3 process.  This is where your system has been failing sporadically. All failed attempts and errors will be reported.  You should not get a DotNet error any longer, but if it does fail to connect you will not get a full set of toys for FX3 and there will be errors in the log.

 

If the errors continue then it will be time to look at operating system reasons for not being able to attach.  If this does need to be done, then the errors to lookup will be in the DOFLinx log file.

 

Do you run any sort of anti-malware program?  What anti-virus do you use?  If the problem persists it will be worthwhile trying it with these temporarily disabled.

Attached Files

•  DOFLinx V7.25 Beta 4.zip   413.08KB   6 downloads

[Lasse73]

Hi DDH69,

 

yes, I use Windows Defender. I tried once with Defender (AntiVirus and Firewall) enabled and once Defender disabled.

There was a part in the Log-File which was reported in German. I translated that (in bold below).

 

******************************************************************************************************************************************************************************

1. Test with Defender

Started DOFLinx.exe -> Started FX3 ->> No Alert -> No Toys, no LEDs and no B2S.

 

Log-File:

28-Dez-20 12:50:16.621 - DOF Linx for Pinball Emulators - DOFLinx by DDH69

28-Dez-20 12:50:16.637 - Starting up - version 7.25 Beta 4

28-Dez-20 12:50:16.637 - For support come and visit the community here http://www.vpforums....p?showforum=104

28-Dez-20 12:50:16.637 - Pre-Reading DOFLinx.INI startup config file details

28-Dez-20 12:50:16.685 - DEBUG enabled with showing of window False

28-Dez-20 12:50:21.550 - Found Teensy controller named 'LedStripController'

28-Dez-20 12:50:21.666 - Joystick # 1 detected : 32 buttons   Z-Axis

28-Dez-20 12:50:21.666 - DOFLinx device: 1 Initializing as Pinscape #1 with name=Pinscape Controller

28-Dez-20 12:50:21.666 - DOFLinx device:1 Pinscape setup with 65 outputs

28-Dez-20 12:50:21.682 - DOFLinx device: 2 Initializing as LEDWiz #1 with ID=0

28-Dez-20 12:50:21.682 - DOFLinx device:2 LEDWiz setup with 32 outputs

28-Dez-20 12:50:21.682 - Reading DOFLinx.INI startup config file details

28-Dez-20 12:50:21.682 - Turning DEBUG off

28-Dez-20 12:50:21.682 - DEBUG enabled with showing of window False

28-Dez-20 12:50:21.682 - Reading DirectOutputConfig file named C:\DirectOutput\Config\directoutputconfig51.ini

28-Dez-20 12:50:21.933 - Set Debug Privilege = Set OK

28-Dez-20 12:50:23.657 - DOFLinx device: 1 Initializing as Pinscape #1 with name=Pinscape Controller

28-Dez-20 12:50:23.657 - DOFLinx device:1 Pinscape setup with 65 outputs

28-Dez-20 12:50:23.657 - DOFLinx device: 2 Initializing as LEDWiz #1 with ID=0

28-Dez-20 12:50:23.657 - DOFLinx device:2 LEDWiz setup with 32 outputs

28-Dez-20 12:50:25.989 - Found valid process name of 'Pinball FX3'

28-Dez-20 12:50:25.989 - Setting FX3 process ID to :8660

28-Dez-20 12:50:28.014 - Activated by process name : 'Pinball FX3'

28-Dez-20 12:50:28.014 - Named process detected and startup commenced

28-Dez-20 12:50:29.310 - Attempt # 1 Failed to get disk file name from FX3 process information

28-Dez-20 12:50:29.314 - System.ComponentModel.Win32Exception (0x80004005): Only a part of the ReadProcessMemory or WriteProcessMemory request was completed

   at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)

   at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)

   at System.Diagnostics.Process.get_MainModule()

   at DOFLinx.MainForm.GetFX3EXEInfo()

28-Dez-20 12:50:30.602 - Attempt # 2 Failed to get disk file name from FX3 process information

28-Dez-20 12:50:30.604 - System.ComponentModel.Win32Exception (0x80004005): Only a part of the ReadProcessMemory or WriteProcessMemory request was completed

   at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)

   at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)

   at System.Diagnostics.Process.get_MainModule()

   at DOFLinx.MainForm.GetFX3EXEInfo()

28-Dez-20 12:50:31.899 - Attempt # 3 Failed to get disk file name from FX3 process information

28-Dez-20 12:50:31.901 - System.ComponentModel.Win32Exception (0x80004005): Only a part of the ReadProcessMemory or WriteProcessMemory request was completed

   at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)

   at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)

   at System.Diagnostics.Process.get_MainModule()

   at DOFLinx.MainForm.GetFX3EXEInfo()

28-Dez-20 12:50:33.189 - Attempt # 4 Failed to get disk file name from FX3 process information

28-Dez-20 12:50:33.193 - System.ComponentModel.Win32Exception (0x80004005): Only a part of the ReadProcessMemory or WriteProcessMemory request was completed

   at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)

   at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)

   at System.Diagnostics.Process.get_MainModule()

   at DOFLinx.MainForm.GetFX3EXEInfo()

28-Dez-20 12:50:34.484 - Attempt # 5 Failed to get disk file name from FX3 process information

28-Dez-20 12:50:34.488 - System.ComponentModel.Win32Exception (0x80004005): Only a part of the ReadProcessMemory or WriteProcessMemory request was completed

   at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)

   at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)

   at System.Diagnostics.Process.get_MainModule()

   at DOFLinx.MainForm.GetFX3EXEInfo()

28-Dez-20 12:50:35.770 - Attempt # 6 Failed to get disk file name from FX3 process information

28-Dez-20 12:50:35.772 - System.ComponentModel.Win32Exception (0x80004005): Only a part of the ReadProcessMemory or WriteProcessMemory request was completed

   at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)

   at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)

   at System.Diagnostics.Process.get_MainModule()

   at DOFLinx.MainForm.GetFX3EXEInfo()

28-Dez-20 12:50:37.055 - Attempt # 7 Failed to get disk file name from FX3 process information

28-Dez-20 12:50:37.059 - System.ComponentModel.Win32Exception (0x80004005): Only a part of the ReadProcessMemory or WriteProcessMemory request was completed

   at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)

   at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)

   at System.Diagnostics.Process.get_MainModule()

   at DOFLinx.MainForm.GetFX3EXEInfo()

28-Dez-20 12:50:38.343 - Attempt # 8 Failed to get disk file name from FX3 process information

28-Dez-20 12:50:38.346 - System.ComponentModel.Win32Exception (0x80004005): Only a part of the ReadProcessMemory or WriteProcessMemory request was completed

   at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)

   at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)

   at System.Diagnostics.Process.get_MainModule()

   at DOFLinx.MainForm.GetFX3EXEInfo()

28-Dez-20 12:50:39.630 - Attempt # 9 Failed to get disk file name from FX3 process information

28-Dez-20 12:50:39.632 - System.ComponentModel.Win32Exception (0x80004005): Only a part of the ReadProcessMemory or WriteProcessMemory request was completed

   at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)

   at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)

   at System.Diagnostics.Process.get_MainModule()

   at DOFLinx.MainForm.GetFX3EXEInfo()

28-Dez-20 12:50:40.923 - Attempt # 10 Failed to get disk file name from FX3 process information

28-Dez-20 12:50:40.926 - System.ComponentModel.Win32Exception (0x80004005): Only a part of the ReadProcessMemory or WriteProcessMemory request was completed

   at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)

   at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)

   at System.Diagnostics.Process.get_MainModule()

   at DOFLinx.MainForm.GetFX3EXEInfo()

28-Dez-20 12:50:41.436 - FX3 information process failed to get key information from FX3.EXE ..... now disabling the link

28-Dez-20 12:50:41.439 - Using full colour palette

28-Dez-20 12:50:41.440 - 122 colours added to the palette

28-Dez-20 12:50:41.443 - Turning on fixed out Device=1 Output=20

28-Dez-20 12:51:12.715 - Right flipper pressed

28-Dez-20 12:51:12.873 - Left flipper pressed

28-Dez-20 12:51:12.875 - Right flipper lifted

28-Dez-20 12:51:12.965 - Right flipper pressed

28-Dez-20 12:51:13.011 - Left flipper lifted

28-Dez-20 12:51:13.084 - Right flipper lifted

28-Dez-20 12:51:13.105 - Left flipper pressed

28-Dez-20 12:51:13.152 - Right flipper pressed

28-Dez-20 12:51:13.229 - Left flipper lifted

28-Dez-20 12:51:13.260 - Right flipper lifted

28-Dez-20 12:51:13.307 - Left flipper pressed

28-Dez-20 12:51:13.355 - Right flipper pressed

28-Dez-20 12:51:13.461 - Left flipper lifted

28-Dez-20 12:51:13.463 - Right flipper lifted

28-Dez-20 12:51:13.509 - Left flipper pressed

28-Dez-20 12:51:13.524 - Right flipper pressed

28-Dez-20 12:51:13.632 - Left flipper lifted

28-Dez-20 12:51:13.634 - Right flipper lifted

28-Dez-20 12:51:14.346 - Right flipper pressed

28-Dez-20 12:51:14.439 - Right flipper lifted

28-Dez-20 12:51:14.470 - Left flipper pressed

28-Dez-20 12:51:14.516 - Right flipper pressed

28-Dez-20 12:51:14.594 - Left flipper lifted

28-Dez-20 12:51:14.649 - Right flipper lifted

28-Dez-20 12:51:14.703 - Left flipper pressed

28-Dez-20 12:51:14.718 - Right flipper pressed

28-Dez-20 12:51:14.827 - Left flipper lifted

28-Dez-20 12:51:14.842 - Right flipper lifted

28-Dez-20 12:51:17.228 - Left flipper pressed

28-Dez-20 12:51:17.264 - Right flipper pressed

28-Dez-20 12:51:17.311 - Left flipper lifted

28-Dez-20 12:51:17.358 - Right flipper lifted

28-Dez-20 12:51:17.420 - Left flipper pressed

28-Dez-20 12:51:17.422 - Right flipper pressed

28-Dez-20 12:51:17.514 - Left flipper lifted

28-Dez-20 12:51:17.529 - Right flipper lifted

28-Dez-20 12:51:17.576 - Left flipper pressed

28-Dez-20 12:51:17.578 - Right flipper pressed

28-Dez-20 12:51:17.668 - Left flipper lifted

28-Dez-20 12:51:17.683 - Right flipper lifted

28-Dez-20 12:51:19.110 - Right flipper pressed

28-Dez-20 12:51:19.218 - Left flipper pressed

28-Dez-20 12:51:19.220 - Right flipper lifted

28-Dez-20 12:51:19.281 - Right flipper pressed

28-Dez-20 12:51:19.327 - Left flipper lifted

28-Dez-20 12:51:19.389 - Right flipper lifted

28-Dez-20 12:51:19.420 - Left flipper pressed

28-Dez-20 12:51:19.451 - Right flipper pressed

28-Dez-20 12:51:19.528 - Left flipper lifted

28-Dez-20 12:51:19.554 - Right flipper lifted

28-Dez-20 12:51:19.606 - Left flipper pressed

28-Dez-20 12:51:19.622 - Right flipper pressed

28-Dez-20 12:51:19.731 - Left flipper lifted

28-Dez-20 12:51:19.733 - Right flipper lifted

28-Dez-20 12:51:20.087 - Right flipper pressed

28-Dez-20 12:51:21.389 - Right flipper lifted

28-Dez-20 12:51:21.934 - Right flipper pressed

28-Dez-20 12:51:22.198 - Right flipper lifted

28-Dez-20 12:51:37.811 - Activating process disappeared so stopping things

28-Dez-20 12:51:37.873 - DOFLinx device: 1 Initializing as Pinscape #1 with name=Pinscape Controller

28-Dez-20 12:51:37.873 - DOFLinx device:1 Pinscape setup with 65 outputs

28-Dez-20 12:51:37.873 - DOFLinx device: 2 Initializing as LEDWiz #1 with ID=0

28-Dez-20 12:51:37.873 - DOFLinx device:2 LEDWiz setup with 32 outputs

28-Dez-20 12:51:48.930 - Shutting down

28-Dez-20 12:51:48.961 - Program close

 

 

******************************************************************************************************************************************************************************

2. Test without Defender

Started DOFLinx.exe -> Started FX3 ->> No Alert -> Toys, LEDs and B2S working fine.

Closed FX3 -> restarted FX3 ->> No Alert -> No Toys, no LEDs and no B2S.

 

Log-File:

at28-Dez-20 12:54:48.598 - DOF Linx for Pinball Emulators - DOFLinx by DDH69

28-Dez-20 12:54:48.598 - Starting up - version 7.25 Beta 4

28-Dez-20 12:54:48.598 - For support come and visit the community here http://www.vpforums....p?showforum=104

28-Dez-20 12:54:48.598 - Pre-Reading DOFLinx.INI startup config file details

28-Dez-20 12:54:48.631 - DEBUG enabled with showing of window False

28-Dez-20 12:54:53.482 - Found Teensy controller named 'LedStripController'

28-Dez-20 12:54:53.584 - Joystick # 1 detected : 32 buttons   Z-Axis

28-Dez-20 12:54:53.599 - DOFLinx device: 1 Initializing as Pinscape #1 with name=Pinscape Controller

28-Dez-20 12:54:53.599 - DOFLinx device:1 Pinscape setup with 65 outputs

28-Dez-20 12:54:53.599 - DOFLinx device: 2 Initializing as LEDWiz #1 with ID=0

28-Dez-20 12:54:53.599 - DOFLinx device:2 LEDWiz setup with 32 outputs

28-Dez-20 12:54:53.599 - Reading DOFLinx.INI startup config file details

28-Dez-20 12:54:53.599 - Turning DEBUG off

28-Dez-20 12:54:53.599 - DEBUG enabled with showing of window False

28-Dez-20 12:54:53.599 - Reading DirectOutputConfig file named C:\DirectOutput\Config\directoutputconfig51.ini

28-Dez-20 12:54:53.849 - Set Debug Privilege = Set OK

28-Dez-20 12:54:55.548 - DOFLinx device: 1 Initializing as Pinscape #1 with name=Pinscape Controller

28-Dez-20 12:54:55.548 - DOFLinx device:1 Pinscape setup with 65 outputs

28-Dez-20 12:54:55.548 - DOFLinx device: 2 Initializing as LEDWiz #1 with ID=0

28-Dez-20 12:54:55.548 - DOFLinx device:2 LEDWiz setup with 32 outputs

28-Dez-20 12:54:57.905 - Found valid process name of 'Pinball FX3'

28-Dez-20 12:54:57.905 - Setting FX3 process ID to :2836

28-Dez-20 12:54:59.925 - Activated by process name : 'Pinball FX3'

28-Dez-20 12:54:59.925 - Named process detected and startup commenced

28-Dez-20 12:55:01.227 - Attempt # 1 Failed to get disk file name from FX3 process information

28-Dez-20 12:55:01.227 - System.ComponentModel.Win32Exception (0x80004005): Only a part of the ReadProcessMemory or WriteProcessMemory request was completed

   at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)

   at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)

   at System.Diagnostics.Process.get_MainModule()

   at DOFLinx.MainForm.GetFX3EXEInfo()

28-Dez-20 12:55:02.527 - Attempt # 2 Failed to get disk file name from FX3 process information

28-Dez-20 12:55:02.527 - System.ComponentModel.Win32Exception (0x80004005): Only a part of the ReadProcessMemory or WriteProcessMemory request was completed

   at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)

   at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)

   at System.Diagnostics.Process.get_MainModule()

   at DOFLinx.MainForm.GetFX3EXEInfo()

28-Dez-20 12:55:03.828 - Attempt # 3 Failed to get disk file name from FX3 process information

28-Dez-20 12:55:03.829 - System.ComponentModel.Win32Exception (0x80004005): Only a part of the ReadProcessMemory or WriteProcessMemory request was completed

   at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)

   at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)

   at System.Diagnostics.Process.get_MainModule()

   at DOFLinx.MainForm.GetFX3EXEInfo()

28-Dez-20 12:55:05.143 - Attempt # 4 Failed to get disk file name from FX3 process information

28-Dez-20 12:55:05.143 - System.ComponentModel.Win32Exception (0x80004005): Only a part of the ReadProcessMemory or WriteProcessMemory request was completed

   at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)

   at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)

   at System.Diagnostics.Process.get_MainModule()

   at DOFLinx.MainForm.GetFX3EXEInfo()

28-Dez-20 12:55:06.443 - Attempt # 5 Failed to get disk file name from FX3 process information

28-Dez-20 12:55:06.443 - System.ComponentModel.Win32Exception (0x80004005): Only a part of the ReadProcessMemory or WriteProcessMemory request was completed

   at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)

   at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)

   at System.Diagnostics.Process.get_MainModule()

   at DOFLinx.MainForm.GetFX3EXEInfo()

28-Dez-20 12:55:07.742 - Attempt # 6 Failed to get disk file name from FX3 process information

28-Dez-20 12:55:07.742 - System.ComponentModel.Win32Exception (0x80004005): Only a part of the ReadProcessMemory or WriteProcessMemory request was completed

   at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)

   at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)

   at System.Diagnostics.Process.get_MainModule()

   at DOFLinx.MainForm.GetFX3EXEInfo()

28-Dez-20 12:55:09.061 - Attempt # 7 Failed to get disk file name from FX3 process information

28-Dez-20 12:55:09.061 - System.ComponentModel.Win32Exception (0x80004005): Only a part of the ReadProcessMemory or WriteProcessMemory request was completed

   at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)

   at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)

   at System.Diagnostics.Process.get_MainModule()

   at DOFLinx.MainForm.GetFX3EXEInfo()

28-Dez-20 12:55:10.360 - Attempt # 8 Failed to get disk file name from FX3 process information

28-Dez-20 12:55:10.360 - System.ComponentModel.Win32Exception (0x80004005): Only a part of the ReadProcessMemory or WriteProcessMemory request was completed

   at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)

   at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)

   at System.Diagnostics.Process.get_MainModule()

   at DOFLinx.MainForm.GetFX3EXEInfo()

28-Dez-20 12:55:11.660 - Attempt # 9 Failed to get disk file name from FX3 process information

28-Dez-20 12:55:11.660 - System.ComponentModel.Win32Exception (0x80004005): Only a part of the ReadProcessMemory or WriteProcessMemory request was completed

   at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)

   at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)

   at System.Diagnostics.Process.get_MainModule()

   at DOFLinx.MainForm.GetFX3EXEInfo()

28-Dez-20 12:55:12.960 - Attempt # 10 Failed to get disk file name from FX3 process information

28-Dez-20 12:55:12.960 - System.ComponentModel.Win32Exception (0x80004005): Only a part of the ReadProcessMemory or WriteProcessMemory request was completed

   at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)

   at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)

   at System.Diagnostics.Process.get_MainModule()

   at DOFLinx.MainForm.GetFX3EXEInfo()

28-Dez-20 12:55:13.476 - FX3 information process failed to get key information from FX3.EXE ..... now disabling the link

28-Dez-20 12:55:13.476 - Using full colour palette

28-Dez-20 12:55:13.476 - 122 colours added to the palette

28-Dez-20 12:55:13.476 - Turning on fixed out Device=1 Output=20

28-Dez-20 12:55:13.712 - Activating process disappeared so stopping things

28-Dez-20 12:55:13.774 - DOFLinx device: 1 Initializing as Pinscape #1 with name=Pinscape Controller

28-Dez-20 12:55:13.774 - DOFLinx device:1 Pinscape setup with 65 outputs

28-Dez-20 12:55:13.774 - DOFLinx device: 2 Initializing as LEDWiz #1 with ID=0

28-Dez-20 12:55:13.774 - DOFLinx device:2 LEDWiz setup with 32 outputs

28-Dez-20 12:55:15.784 - Found valid process name of 'Pinball FX3'

28-Dez-20 12:55:15.784 - Setting FX3 process ID to :4460

28-Dez-20 12:55:17.801 - Activated by process name : 'Pinball FX3'

28-Dez-20 12:55:17.843 - Named process detected and startup commenced

28-Dez-20 12:55:18.365 - FX3.EXE file exists, getting details

28-Dez-20 12:55:18.367 - FX3 EXE name=C:\Program Files (x86)\Steam\steamapps\common\Pinball FX3\Pinball FX3.exe Size=11303056 bytes, Dated 23.12.2020 17:59:36

28-Dez-20 12:55:18.368 - Applying memory offsets for FX3 version circa 2/12/20

28-Dez-20 12:55:18.372 - FX3 full link active

28-Dez-20 12:55:18.373 - Using full colour palette

28-Dez-20 12:55:18.374 - 122 colours added to the palette

28-Dez-20 12:55:18.375 - Turning on fixed out Device=1 Output=20

28-Dez-20 12:55:19.432 - B2S Backglass loaded - FX3Logo

28-Dez-20 12:56:41.547 - Loading FX3 configuration file C:\DirectOutput\FX3\ALL_PRE.FX3

28-Dez-20 12:56:41.559 - Loading FX3 configuration file C:\DirectOutput\FX3\WMSFunHouse.FX3

28-Dez-20 12:56:41.561 - Processing parameter 'FF_ROM' with data 'FX3_WMS_FUNHOUSE' in real-time

28-Dez-20 12:56:41.562 - Loading DOF 'Pinball' with ROM='FX3_WMS_FUNHOUSE'

28-Dez-20 12:56:45.892 - Turning on fixed out Device=1 Output=20

28-Dez-20 12:56:45.894 - Processing parameter 'BACKGLASS_EXISTS' with data 'YES' in real-time

28-Dez-20 12:56:45.901 - Loading FX3 configuration file C:\DirectOutput\FX3\ALL_POST.FX3

28-Dez-20 12:56:45.928 - B2S Backglass loaded - WMSFunHouse

28-Dez-20 12:56:45.948 - Using full colour palette

28-Dez-20 12:56:45.949 - 122 colours added to the palette

28-Dez-20 12:56:45.951 - Cabinet Mode = 0   Backglass Mode = 0

28-Dez-20 12:56:49.957 - Loading FX3 configuration file C:\DirectOutput\FX3\ALL_PRE.FX3

28-Dez-20 12:56:49.960 - Loading FX3 configuration file C:\DirectOutput\FX3\AdventureLand.FX3

28-Dez-20 12:56:49.963 - Processing parameter 'FF_ROM' with data 'FX3_AMUSEMENT' in real-time

28-Dez-20 12:56:49.964 - Loading DOF 'Pinball' with ROM='FX3_AMUSEMENT'

28-Dez-20 12:56:54.246 - Turning on fixed out Device=1 Output=20

28-Dez-20 12:56:54.248 - Processing parameter 'BACKGLASS_EXISTS' with data 'YES' in real-time

28-Dez-20 12:56:54.257 - Loading FX3 configuration file C:\DirectOutput\FX3\ALL_POST.FX3

28-Dez-20 12:56:54.282 - B2S Backglass loaded - AdventureLand

28-Dez-20 12:56:54.297 - Building restricted colour palette for game name = AdventureLand

28-Dez-20 12:56:54.299 - 8 colours added to the palette

28-Dez-20 12:56:54.300 - Cabinet Mode = 0   Backglass Mode = 0

28-Dez-20 12:56:55.291 - Loading FX3 configuration file C:\DirectOutput\FX3\ALL_PRE.FX3

28-Dez-20 12:56:55.295 - Loading FX3 configuration file C:\DirectOutput\FX3\WildWestRampage.FX3

28-Dez-20 12:56:55.297 - Processing parameter 'FF_ROM' with data 'FX2_WILDWEST' in real-time

28-Dez-20 12:56:55.298 - Loading DOF 'Pinball' with ROM='FX2_WILDWEST'

28-Dez-20 12:56:59.572 - Turning on fixed out Device=1 Output=20

28-Dez-20 12:56:59.574 - Processing parameter 'BACKGLASS_EXISTS' with data 'YES' in real-time

28-Dez-20 12:56:59.583 - Loading FX3 configuration file C:\DirectOutput\FX3\ALL_POST.FX3

28-Dez-20 12:56:59.608 - B2S Backglass loaded - WildWestRampage

28-Dez-20 12:56:59.625 - Building restricted colour palette for game name = WildWestRampage

28-Dez-20 12:56:59.626 - 3 colours added to the palette

28-Dez-20 12:56:59.627 - Cabinet Mode = 0   Backglass Mode = 0

28-Dez-20 12:57:08.719 - GAMEMODE mode=1 action #0 of 'FF_COLOUR,BLACK,RGB_DF,0'

28-Dez-20 12:57:08.722 - GAMEMODE mode=1 action #1 of 'FF_FLASHER,DV_FLOL,FL_FD,6,750,50,RANDOM'

28-Dez-20 12:57:08.725 - GAMEMODE mode=1 action #2 of 'FF_FLASHER,DV_FLOR,FL_FD,6,750,50,RANDOM'

28-Dez-20 12:57:08.726 - GAMEMODE mode=1 action #3 of 'FF_FLASHER,DV_FLIL,FL_FD,6,750,50,RANDOM'

28-Dez-20 12:57:08.728 - GAMEMODE mode=1 action #4 of 'FF_FLASHER,DV_FLIR,FL_FD,6,750,50,RANDOM'

28-Dez-20 12:57:08.729 - GAMEMODE mode=1 action #5 of 'FF_FLASHER,DV_FLCN,FL_FD,6,750,50,RANDOM'

28-Dez-20 12:57:08.730 - GAMEMODE mode=1 action #6 of 'FF_B2S,B2SSTARTANIMATION,TITLE'

28-Dez-20 12:57:08.734 - GAMEMODE mode=1 action #7 of 'FF_DOF,E424,-1'

28-Dez-20 12:57:09.624 - RIGHTFLIPPER mode=1 action #0 of 'FF_DEV,DV_RF,10000'

28-Dez-20 12:57:09.626 - Link is turning on device #2 for 10000 milliseconds

28-Dez-20 12:57:09.628 - RIGHTFLIPPER mode=1 action #1 of 'FF_DOF,E102,-1'

28-Dez-20 12:57:09.733 - RIGHTFLIPPER mode=2 action #0 of 'FF_DEV,DV_RF,0'

28-Dez-20 12:57:09.735 - RIGHTFLIPPER mode=2 action #1 of 'FF_DOF,E102,0'

28-Dez-20 12:57:09.736 - Link is turning off device #2

28-Dez-20 12:57:09.764 - LEFTFLIPPER mode=1 action #0 of 'FF_DEV,DV_LF,10000'

28-Dez-20 12:57:09.766 - Link is turning on device #1 for 10000 milliseconds

28-Dez-20 12:57:09.767 - LEFTFLIPPER mode=1 action #1 of 'FF_DOF,E101,-1'

28-Dez-20 12:57:09.858 - RIGHTFLIPPER mode=1 action #0 of 'FF_DEV,DV_RF,10000'

28-Dez-20 12:57:09.860 - Link is turning on device #2 for 10000 milliseconds

28-Dez-20 12:57:09.861 - RIGHTFLIPPER mode=1 action #1 of 'FF_DOF,E102,-1'

28-Dez-20 12:57:09.868 - SLINGSHOT_FLASHER_LEFT mode=1 action #0 of 'FF_FLASHER,DV_FLOL,FL_ON,1,1,100,WHITE'

28-Dez-20 12:57:09.870 - SLINGSHOT_FLASHER_LEFT mode=1 action #1 of 'FF_COLOUR,WHITE,RGB_TT,200'

28-Dez-20 12:57:09.872 - SLINGSHOT_FLASHER_LEFT mode=1 action #2 of 'FF_B2S,B2SSTARTANIMATION,CLOUD1'

28-Dez-20 12:57:09.873 - SLINGSHOT_FLASHER_RIGHT mode=1 action #0 of 'FF_FLASHER,DV_FLOR,FL_ON,1,1,100,WHITE'

28-Dez-20 12:57:09.875 - SLINGSHOT_FLASHER_RIGHT mode=1 action #1 of 'FF_COLOUR,WHITE,RGB_TT,200'

28-Dez-20 12:57:09.876 - SLINGSHOT_FLASHER_RIGHT mode=1 action #2 of 'FF_B2S,B2SSTARTANIMATION,STAR'

28-Dez-20 12:57:09.884 - LEFTFLIPPER mode=2 action #0 of 'FF_DEV,DV_LF,0'

28-Dez-20 12:57:09.885 - LEFTFLIPPER mode=2 action #1 of 'FF_DOF,E101,0'

28-Dez-20 12:57:09.887 - Link is turning off device #1

28-Dez-20 12:57:09.931 - RIGHTFLIPPER mode=2 action #0 of 'FF_DEV,DV_RF,0'

28-Dez-20 12:57:09.932 - RIGHTFLIPPER mode=2 action #1 of 'FF_DOF,E102,0'

28-Dez-20 12:57:09.934 - Link is turning off device #2

28-Dez-20 12:57:09.947 - SLINGSHOT_FLASHER_LEFT mode=2 action #0 of 'FF_FLASHER,DV_FLOL,FL_OFF,1,1,100,WHITE'

28-Dez-20 12:57:09.948 - SLINGSHOT_FLASHER_RIGHT mode=2 action #0 of 'FF_FLASHER,DV_FLOR,FL_OFF,1,1,100,WHITE'

28-Dez-20 12:57:09.977 - SLINGSHOT_FLASHER_LEFT mode=1 action #0 of 'FF_FLASHER,DV_FLOL,FL_ON,1,1,100,WHITE'

28-Dez-20 12:57:09.979 - SLINGSHOT_FLASHER_LEFT mode=1 action #1 of 'FF_COLOUR,WHITE,RGB_TT,200'

28-Dez-20 12:57:09.980 - SLINGSHOT_FLASHER_LEFT mode=1 action #2 of 'FF_B2S,B2SSTARTANIMATION,CLOUD1'

28-Dez-20 12:57:09.982 - SLINGSHOT_FLASHER_RIGHT mode=1 action #0 of 'FF_FLASHER,DV_FLOR,FL_ON,1,1,100,WHITE'

28-Dez-20 12:57:09.983 - SLINGSHOT_FLASHER_RIGHT mode=1 action #1 of 'FF_COLOUR,WHITE,RGB_TT,200'

28-Dez-20 12:57:09.984 - SLINGSHOT_FLASHER_RIGHT mode=1 action #2 of 'FF_B2S,B2SSTARTANIMATION,STAR'

28-Dez-20 12:57:10.015 - LEFTFLIPPER mode=1 action #0 of 'FF_DEV,DV_LF,10000'

28-Dez-20 12:57:10.016 - Link is turning on device #1 for 10000 milliseconds

28-Dez-20 12:57:10.017 - LEFTFLIPPER mode=1 action #1 of 'FF_DOF,E101,-1'

28-Dez-20 12:57:10.019 - RIGHTFLIPPER mode=1 action #0 of 'FF_DEV,DV_RF,10000'

28-Dez-20 12:57:10.020 - Link is turning on device #2 for 10000 milliseconds

28-Dez-20 12:57:10.021 - RIGHTFLIPPER mode=1 action #1 of 'FF_DOF,E102,-1'

28-Dez-20 12:57:10.046 - LAUNCHMODE mode=1 action #0 of 'FF_BUTTON,BUT_LB,BA_FL,10000,500'

28-Dez-20 12:57:10.048 - LAUNCHMODE mode=1 action #1 of 'FF_DOF,E310,-1'

28-Dez-20 12:57:10.054 - SLINGSHOT_FLASHER_LEFT mode=2 action #0 of 'FF_FLASHER,DV_FLOL,FL_OFF,1,1,100,WHITE'

28-Dez-20 12:57:10.055 - SLINGSHOT_FLASHER_RIGHT mode=2 action #0 of 'FF_FLASHER,DV_FLOR,FL_OFF,1,1,100,WHITE'

28-Dez-20 12:57:10.063 - BALLOUT mode=1 action #0 of 'FF_FLASHER,DV_FLOL,FL_OFF,1,1,100,RANDOM'

28-Dez-20 12:57:10.064 - BALLOUT mode=1 action #1 of 'FF_FLASHER,DV_FLIL,FL_OFF,1,1,100,RANDOM'

28-Dez-20 12:57:10.065 - BALLOUT mode=1 action #2 of 'FF_FLASHER,DV_FLCN,FL_OFF,1,1,100,RANDOM'

28-Dez-20 12:57:10.066 - BALLOUT mode=1 action #3 of 'FF_FLASHER,DV_FLIR,FL_OFF,1,1,100,RANDOM'

28-Dez-20 12:57:10.068 - BALLOUT mode=1 action #4 of 'FF_FLASHER,DV_FLOR,FL_OFF,1,1,100,RANDOM'

28-Dez-20 12:57:10.069 - BALLOUT mode=1 action #5 of 'FF_DEV,DV_SR,0'

28-Dez-20 12:57:10.071 - BALLOUT mode=1 action #6 of 'FF_DEV,DV_BK,0'

28-Dez-20 12:57:10.072 - BALLOUT mode=1 action #7 of 'FF_B2S,B2SSTOPALLANIMATIONS'

28-Dez-20 12:57:10.074 - BALLOUT mode=1 action #8 of 'FF_DOF,E130,-1'

28-Dez-20 12:57:10.076 - SLINGSHOT_FLASHER_LEFT mode=1 action #0 of 'FF_FLASHER,DV_FLOL,FL_ON,1,1,100,WHITE'

28-Dez-20 12:57:10.077 - SLINGSHOT_FLASHER_LEFT mode=1 action #1 of 'FF_COLOUR,WHITE,RGB_TT,200'

28-Dez-20 12:57:10.078 - SLINGSHOT_FLASHER_LEFT mode=1 action #2 of 'FF_B2S,B2SSTARTANIMATION,CLOUD1'

28-Dez-20 12:57:10.080 - SLINGSHOT_FLASHER_RIGHT mode=1 action #0 of 'FF_FLASHER,DV_FLOR,FL_ON,1,1,100,WHITE'

28-Dez-20 12:57:10.081 - SLINGSHOT_FLASHER_RIGHT mode=1 action #1 of 'FF_COLOUR,WHITE,RGB_TT,200'

28-Dez-20 12:57:10.082 - SLINGSHOT_FLASHER_RIGHT mode=1 action #2 of 'FF_B2S,B2SSTARTANIMATION,STAR'

28-Dez-20 12:57:10.092 - There are no OFF actions for BALLOUT

28-Dez-20 12:57:10.094 - RIGHTFLIPPER mode=2 action #0 of 'FF_DEV,DV_RF,0'

28-Dez-20 12:57:10.095 - RIGHTFLIPPER mode=2 action #1 of 'FF_DOF,E102,0'

28-Dez-20 12:57:10.096 - Link is turning off device #2

28-Dez-20 12:57:10.139 - LEFTFLIPPER mode=2 action #0 of 'FF_DEV,DV_LF,0'

28-Dez-20 12:57:10.140 - LEFTFLIPPER mode=2 action #1 of 'FF_DOF,E101,0'

28-Dez-20 12:57:10.142 - Link is turning off device #1

28-Dez-20 12:57:10.147 - SLINGSHOT_FLASHER_LEFT mode=2 action #0 of 'FF_FLASHER,DV_FLOL,FL_OFF,1,1,100,WHITE'

28-Dez-20 12:57:10.148 - SLINGSHOT_FLASHER_RIGHT mode=2 action #0 of 'FF_FLASHER,DV_FLOR,FL_OFF,1,1,100,WHITE'

28-Dez-20 12:57:10.539 - RIGHTFLIPPER mode=1 action #0 of 'FF_DEV,DV_RF,10000'

28-Dez-20 12:57:10.540 - Link is turning on device #2 for 10000 milliseconds

28-Dez-20 12:57:10.541 - RIGHTFLIPPER mode=1 action #1 of 'FF_DOF,E102,-1'

28-Dez-20 12:57:10.543 - LAUNCHMODE mode=2 action #0 of 'FF_BUTTON,BUT_LB,BA_OFF,0,0'

28-Dez-20 12:57:10.544 - LAUNCHMODE mode=2 action #1 of 'FF_DOF,E310,0'

28-Dez-20 12:57:10.585 - LEFTFLIPPER mode=1 action #0 of 'FF_DEV,DV_LF,10000'

28-Dez-20 12:57:10.586 - Link is turning on device #1 for 10000 milliseconds

28-Dez-20 12:57:10.587 - LEFTFLIPPER mode=1 action #1 of 'FF_DOF,E101,-1'

28-Dez-20 12:57:10.677 - BALLIN_SENSOR mode=1 action #0 of 'FF_DEV,DV_MC,-1'

28-Dez-20 12:57:10.678 - BALLIN_SENSOR mode=1 action #1 of 'FF_DOF,E311,-1'

28-Dez-20 12:57:10.680 - LEFTFLIPPER mode=2 action #0 of 'FF_DEV,DV_LF,0'

28-Dez-20 12:57:10.681 - LEFTFLIPPER mode=2 action #1 of 'FF_DOF,E101,0'

28-Dez-20 12:57:10.683 - RIGHTFLIPPER mode=2 action #0 of 'FF_DEV,DV_RF,0'

28-Dez-20 12:57:10.684 - RIGHTFLIPPER mode=2 action #1 of 'FF_DOF,E102,0'

28-Dez-20 12:57:10.685 - LAUNCHMODE mode=1 action #0 of 'FF_BUTTON,BUT_LB,BA_FL,10000,500'

28-Dez-20 12:57:10.686 - LAUNCHMODE mode=1 action #1 of 'FF_DOF,E310,-1'

28-Dez-20 12:57:10.687 - Link is turning off device #1

28-Dez-20 12:57:10.688 - Link is turning off device #2

28-Dez-20 12:57:11.328 - There are no OFF actions for BALLIN_SENSOR

28-Dez-20 12:57:11.623 - There are no ON actions for LAUNCHBALL

28-Dez-20 12:57:11.995 - LAUNCHBALL mode=2 action #0 of 'FF_DEV,DV_MR,-1'

28-Dez-20 12:57:11.996 - Link is turning on device #7 for 50 milliseconds

28-Dez-20 12:57:11.998 - LAUNCHBALL mode=2 action #1 of 'FF_DOF,E132,-1'

28-Dez-20 12:57:11.999 - LAUNCHBALL mode=2 action #2 of 'FF_B2S,B2SSTARTANIMATION,TITLE'

28-Dez-20 12:57:12.058 - Link is turning off device #7

28-Dez-20 12:57:12.089 - RIGHTFLIPPER mode=1 action #0 of 'FF_DEV,DV_RF,10000'

28-Dez-20 12:57:12.091 - Link is turning on device #2 for 10000 milliseconds

28-Dez-20 12:57:12.092 - RIGHTFLIPPER mode=1 action #1 of 'FF_DOF,E102,-1'

28-Dez-20 12:57:12.093 - LAUNCHMODE mode=2 action #0 of 'FF_BUTTON,BUT_LB,BA_OFF,0,0'

28-Dez-20 12:57:12.094 - LAUNCHMODE mode=2 action #1 of 'FF_DOF,E310,0'

28-Dez-20 12:57:12.244 - LEFTFLIPPER mode=1 action #0 of 'FF_DEV,DV_LF,10000'

28-Dez-20 12:57:12.245 - Link is turning on device #1 for 10000 milliseconds

28-Dez-20 12:57:12.246 - LEFTFLIPPER mode=1 action #1 of 'FF_DOF,E101,-1'

28-Dez-20 12:57:12.248 - RIGHTFLIPPER mode=2 action #0 of 'FF_DEV,DV_RF,0'

28-Dez-20 12:57:12.249 - RIGHTFLIPPER mode=2 action #1 of 'FF_DOF,E102,0'

28-Dez-20 12:57:12.251 - Link is turning off device #2

28-Dez-20 12:57:12.352 - RIGHTFLIPPER mode=1 action #0 of 'FF_DEV,DV_RF,10000'

28-Dez-20 12:57:12.354 - Link is turning on device #2 for 10000 milliseconds

28-Dez-20 12:57:12.355 - RIGHTFLIPPER mode=1 action #1 of 'FF_DOF,E102,-1'

28-Dez-20 12:57:12.383 - LEFTFLIPPER mode=2 action #0 of 'FF_DEV,DV_LF,0'

28-Dez-20 12:57:12.385 - LEFTFLIPPER mode=2 action #1 of 'FF_DOF,E101,0'

28-Dez-20 12:57:12.386 - Link is turning off device #1

28-Dez-20 12:57:12.508 - LEFTFLIPPER mode=1 action #0 of 'FF_DEV,DV_LF,10000'

28-Dez-20 12:57:12.509 - Link is turning on device #1 for 10000 milliseconds

28-Dez-20 12:57:12.510 - LEFTFLIPPER mode=1 action #1 of 'FF_DOF,E101,-1'

28-Dez-20 12:57:12.555 - RIGHTFLIPPER mode=2 action #0 of 'FF_DEV,DV_RF,0'

28-Dez-20 12:57:12.556 - RIGHTFLIPPER mode=2 action #1 of 'FF_DOF,E102,0'

28-Dez-20 12:57:12.557 - Link is turning off device #2

28-Dez-20 12:57:12.661 - LEFTFLIPPER mode=2 action #0 of 'FF_DEV,DV_LF,0'

28-Dez-20 12:57:12.663 - LEFTFLIPPER mode=2 action #1 of 'FF_DOF,E101,0'

28-Dez-20 12:57:12.664 - Link is turning off device #1

28-Dez-20 12:57:12.811 - RIGHTFLIPPER mode=1 action #0 of 'FF_DEV,DV_RF,10000'

28-Dez-20 12:57:12.813 - Link is turning on device #2 for 10000 milliseconds

28-Dez-20 12:57:12.814 - RIGHTFLIPPER mode=1 action #1 of 'FF_DOF,E102,-1'

28-Dez-20 12:57:13.142 - RIGHTFLIPPER mode=2 action #0 of 'FF_DEV,DV_RF,0'

28-Dez-20 12:57:13.143 - RIGHTFLIPPER mode=2 action #1 of 'FF_DOF,E102,0'

28-Dez-20 12:57:13.145 - Link is turning off device #2

28-Dez-20 12:57:13.420 - RIGHTFLIPPER mode=1 action #0 of 'FF_DEV,DV_RF,10000'

28-Dez-20 12:57:13.422 - Link is turning on device #2 for 10000 milliseconds

28-Dez-20 12:57:13.423 - RIGHTFLIPPER mode=1 action #1 of 'FF_DOF,E102,-1'

28-Dez-20 12:57:13.465 - RIGHTFLIPPER mode=2 action #0 of 'FF_DEV,DV_RF,0'

28-Dez-20 12:57:13.467 - RIGHTFLIPPER mode=2 action #1 of 'FF_DOF,E102,0'

28-Dez-20 12:57:13.468 - Link is turning off device #2

28-Dez-20 12:57:13.481 - ON Action refused due to debounce time RIGHTFLIPPER - 46633421 - 100 - 46633481.3403

28-Dez-20 12:57:13.668 - SENSOR_REVO_IN mode=1 action #0 of 'FF_DEV,DV_BK,2000'

28-Dez-20 12:57:13.743 - There are no OFF actions for SENSOR_REVO_IN

28-Dez-20 12:57:14.748 - RIGHTFLIPPER mode=2 action #0 of 'FF_DEV,DV_RF,0'

28-Dez-20 12:57:14.750 - RIGHTFLIPPER mode=2 action #1 of 'FF_DOF,E102,0'

28-Dez-20 12:57:14.752 - Link is turning off device #2

28-Dez-20 12:57:14.903 - RIGHTFLIPPER mode=1 action #0 of 'FF_DEV,DV_RF,10000'

28-Dez-20 12:57:14.905 - Link is turning on device #2 for 10000 milliseconds

28-Dez-20 12:57:14.906 - RIGHTFLIPPER mode=1 action #1 of 'FF_DOF,E102,-1'

28-Dez-20 12:57:16.669 - RIGHTFLIPPER mode=2 action #0 of 'FF_DEV,DV_RF,0'

28-Dez-20 12:57:16.671 - RIGHTFLIPPER mode=2 action #1 of 'FF_DOF,E102,0'

28-Dez-20 12:57:16.672 - Link is turning off device #2

28-Dez-20 12:57:16.689 - RIGHTFLIPPER mode=1 action #0 of 'FF_DEV,DV_RF,10000'

28-Dez-20 12:57:16.691 - Link is turning on device #2 for 10000 milliseconds

28-Dez-20 12:57:16.692 - RIGHTFLIPPER mode=1 action #1 of 'FF_DOF,E102,-1'

28-Dez-20 12:57:16.748 - RIGHTFLIPPER mode=2 action #0 of 'FF_DEV,DV_RF,0'

28-Dez-20 12:57:16.749 - RIGHTFLIPPER mode=2 action #1 of 'FF_DOF,E102,0'

28-Dez-20 12:57:16.751 - Link is turning off device #2

28-Dez-20 12:57:17.488 - RIGHTFLIPPER mode=1 action #0 of 'FF_DEV,DV_RF,10000'

28-Dez-20 12:57:17.490 - Link is turning on device #2 for 10000 milliseconds

28-Dez-20 12:57:17.491 - RIGHTFLIPPER mode=1 action #1 of 'FF_DOF,E102,-1'

28-Dez-20 12:57:17.679 - SENSOR_BUMPERHOLE_RIGHT mode=1 action #0 of 'FF_DEV,DV_GR,750'

28-Dez-20 12:57:18.262 - There are no OFF actions for SENSOR_BUMPERHOLE_RIGHT

28-Dez-20 12:57:18.300 - RIGHTFLIPPER mode=2 action #0 of 'FF_DEV,DV_RF,0'

28-Dez-20 12:57:18.302 - RIGHTFLIPPER mode=2 action #1 of 'FF_DOF,E102,0'

28-Dez-20 12:57:18.303 - Link is turning off device #2

28-Dez-20 12:57:18.966 - LEFTFLIPPER mode=1 action #0 of 'FF_DEV,DV_LF,10000'

28-Dez-20 12:57:18.968 - Link is turning on device #1 for 10000 milliseconds

28-Dez-20 12:57:18.969 - LEFTFLIPPER mode=1 action #1 of 'FF_DOF,E101,-1'

28-Dez-20 12:57:19.214 - SENSOR_RIGHT_RAMP_HEAD mode=1 action #0 of 'FF_FLASHER,DV_FLOR,FL_TT,1,200,100,ROYAL_BLUE'

28-Dez-20 12:57:19.216 - SENSOR_RIGHT_RAMP_HEAD mode=1 action #1 of 'FF_DOF,E414,-1'

28-Dez-20 12:57:19.217 - SENSOR_RIGHT_RAMP_HEAD mode=1 action #2 of 'FF_B2S,B2SSTARTANIMATION,STAR'

28-Dez-20 12:57:19.244 - There are no OFF actions for SENSOR_RIGHT_RAMP_HEAD

28-Dez-20 12:57:19.511 - LEFTFLIPPER mode=2 action #0 of 'FF_DEV,DV_LF,0'

28-Dez-20 12:57:19.512 - LEFTFLIPPER mode=2 action #1 of 'FF_DOF,E101,0'

28-Dez-20 12:57:19.514 - Link is turning off device #1

28-Dez-20 12:57:21.198 - RIGHTFLIPPER mode=1 action #0 of 'FF_DEV,DV_RF,10000'

28-Dez-20 12:57:21.200 - Link is turning on device #2 for 10000 milliseconds

28-Dez-20 12:57:21.201 - RIGHTFLIPPER mode=1 action #1 of 'FF_DOF,E102,-1'

28-Dez-20 12:57:21.772 - LEFTFLIPPER mode=1 action #0 of 'FF_DEV,DV_LF,10000'

28-Dez-20 12:57:21.774 - Link is turning on device #1 for 10000 milliseconds

28-Dez-20 12:57:21.776 - LEFTFLIPPER mode=1 action #1 of 'FF_DOF,E101,-1'

28-Dez-20 12:57:21.820 - RIGHTFLIPPER mode=2 action #0 of 'FF_DEV,DV_RF,0'

28-Dez-20 12:57:21.822 - RIGHTFLIPPER mode=2 action #1 of 'FF_DOF,E102,0'

28-Dez-20 12:57:21.823 - Link is turning off device #2

28-Dez-20 12:57:22.378 - LEFTFLIPPER mode=2 action #0 of 'FF_DEV,DV_LF,0'

28-Dez-20 12:57:22.379 - LEFTFLIPPER mode=2 action #1 of 'FF_DOF,E101,0'

28-Dez-20 12:57:22.381 - Link is turning off device #1

28-Dez-20 12:57:22.392 - RIGHTFLIPPER mode=1 action #0 of 'FF_DEV,DV_RF,10000'

28-Dez-20 12:57:22.394 - Link is turning on device #2 for 10000 milliseconds

28-Dez-20 12:57:22.395 - RIGHTFLIPPER mode=1 action #1 of 'FF_DOF,E102,-1'

28-Dez-20 12:57:22.887 - RIGHTFLIPPER mode=2 action #0 of 'FF_DEV,DV_RF,0'

28-Dez-20 12:57:22.889 - RIGHTFLIPPER mode=2 action #1 of 'FF_DOF,E102,0'

28-Dez-20 12:57:22.890 - Link is turning off device #2

28-Dez-20 12:57:23.566 - RIGHTFLIPPER mode=1 action #0 of 'FF_DEV,DV_RF,10000'

28-Dez-20 12:57:23.568 - Link is turning on device #2 for 10000 milliseconds

28-Dez-20 12:57:23.569 - RIGHTFLIPPER mode=1 action #1 of 'FF_DOF,E102,-1'

28-Dez-20 12:57:23.798 - SENSOR_REVO_IN mode=1 action #0 of 'FF_DEV,DV_BK,2000'

28-Dez-20 12:57:23.814 - There are no OFF actions for SENSOR_REVO_IN

28-Dez-20 12:57:23.890 - SENSOR_SALOON_RAMP mode=1 action #0 of 'FF_B2S,B2SSTARTANIMATION,CLOUD1'

28-Dez-20 12:57:23.892 - SENSOR_SALOON_RAMP mode=1 action #1 of 'FF_DOF,E415,-1'

28-Dez-20 12:57:23.936 - There are no OFF actions for SENSOR_SALOON_RAMP

28-Dez-20 12:57:24.106 - SENSOR_SALOON_LEFT mode=1 action #0 of 'FF_B2S,B2SSTARTANIMATION,CLOUD2'

28-Dez-20 12:57:24.107 - SENSOR_SALOON_LEFT mode=1 action #1 of 'FF_DOF,E416,-1'

28-Dez-20 12:57:24.168 - There are no OFF actions for SENSOR_SALOON_LEFT

28-Dez-20 12:57:24.309 - RIGHTFLIPPER mode=2 action #0 of 'FF_DEV,DV_RF,0'

28-Dez-20 12:57:24.311 - RIGHTFLIPPER mode=2 action #1 of 'FF_DOF,E102,0'

28-Dez-20 12:57:24.312 - Link is turning off device #2

28-Dez-20 12:57:24.350 - SLINGSHOT_FLASHER_LEFT mode=1 action #0 of 'FF_FLASHER,DV_FLOL,FL_ON,1,1,100,WHITE'

28-Dez-20 12:57:24.352 - SLINGSHOT_FLASHER_LEFT mode=1 action #1 of 'FF_COLOUR,WHITE,RGB_TT,200'

28-Dez-20 12:57:24.353 - SLINGSHOT_FLASHER_LEFT mode=1 action #2 of 'FF_B2S,B2SSTARTANIMATION,CLOUD1'

28-Dez-20 12:57:24.355 - SLINGSHOT_FLASHER_RIGHT mode=1 action #0 of 'FF_FLASHER,DV_FLOR,FL_ON,1,1,100,WHITE'

28-Dez-20 12:57:24.356 - SLINGSHOT_FLASHER_RIGHT mode=1 action #1 of 'FF_COLOUR,WHITE,RGB_TT,200'

28-Dez-20 12:57:24.357 - SLINGSHOT_FLASHER_RIGHT mode=1 action #2 of 'FF_B2S,B2SSTARTANIMATION,STAR'

28-Dez-20 12:57:24.427 - SLINGSHOT_FLASHER_LEFT mode=2 action #0 of 'FF_FLASHER,DV_FLOL,FL_OFF,1,1,100,WHITE'

28-Dez-20 12:57:24.429 - SLINGSHOT_FLASHER_RIGHT mode=2 action #0 of 'FF_FLASHER,DV_FLOR,FL_OFF,1,1,100,WHITE'

28-Dez-20 12:57:24.459 - SLINGSHOT_FLASHER_LEFT mode=1 action #0 of 'FF_FLASHER,DV_FLOL,FL_ON,1,1,100,WHITE'

28-Dez-20 12:57:24.461 - SLINGSHOT_FLASHER_LEFT mode=1 action #1 of 'FF_COLOUR,WHITE,RGB_TT,200'

28-Dez-20 12:57:24.462 - SLINGSHOT_FLASHER_LEFT mode=1 action #2 of 'FF_B2S,B2SSTARTANIMATION,CLOUD1'

28-Dez-20 12:57:24.464 - SLINGSHOT_FLASHER_RIGHT mode=1 action #0 of 'FF_FLASHER,DV_FLOR,FL_ON,1,1,100,WHITE'

28-Dez-20 12:57:24.465 - SLINGSHOT_FLASHER_RIGHT mode=1 action #1 of 'FF_COLOUR,WHITE,RGB_TT,200'

28-Dez-20 12:57:24.466 - SLINGSHOT_FLASHER_RIGHT mode=1 action #2 of 'FF_B2S,B2SSTARTANIMATION,STAR'

28-Dez-20 12:57:24.536 - SLINGSHOT_FLASHER_LEFT mode=2 action #0 of 'FF_FLASHER,DV_FLOL,FL_OFF,1,1,100,WHITE'

28-Dez-20 12:57:24.538 - SLINGSHOT_FLASHER_RIGHT mode=2 action #0 of 'FF_FLASHER,DV_FLOR,FL_OFF,1,1,100,WHITE'

28-Dez-20 12:57:24.552 - SLINGSHOT_FLASHER_LEFT mode=1 action #0 of 'FF_FLASHER,DV_FLOL,FL_ON,1,1,100,WHITE'

28-Dez-20 12:57:24.554 - SLINGSHOT_FLASHER_LEFT mode=1 action #1 of 'FF_COLOUR,WHITE,RGB_TT,200'

28-Dez-20 12:57:24.555 - SLINGSHOT_FLASHER_LEFT mode=1 action #2 of 'FF_B2S,B2SSTARTANIMATION,CLOUD1'

28-Dez-20 12:57:24.556 - SLINGSHOT_FLASHER_RIGHT mode=1 action #0 of 'FF_FLASHER,DV_FLOR,FL_ON,1,1,100,WHITE'

28-Dez-20 12:57:24.558 - SLINGSHOT_FLASHER_RIGHT mode=1 action #1 of 'FF_COLOUR,WHITE,RGB_TT,200'

28-Dez-20 12:57:24.559 - SLINGSHOT_FLASHER_RIGHT mode=1 action #2 of 'FF_B2S,B2SSTARTANIMATION,STAR'

28-Dez-20 12:57:24.630 - SLINGSHOT_FLASHER_LEFT mode=2 action #0 of 'FF_FLASHER,DV_FLOL,FL_OFF,1,1,100,WHITE'

28-Dez-20 12:57:24.632 - SLINGSHOT_FLASHER_RIGHT mode=2 action #0 of 'FF_FLASHER,DV_FLOR,FL_OFF,1,1,100,WHITE'

28-Dez-20 12:57:26.331 - LEFTFLIPPER mode=1 action #0 of 'FF_DEV,DV_LF,10000'

28-Dez-20 12:57:26.333 - Link is turning on device #1 for 10000 milliseconds

28-Dez-20 12:57:26.334 - LEFTFLIPPER mode=1 action #1 of 'FF_DOF,E101,-1'

28-Dez-20 12:57:26.502 - SLINGSHOT_LEFT mode=1 action #0 of 'FF_DEV,DV_LS,-1'

28-Dez-20 12:57:26.503 - Link is turning on device #3 for 50 milliseconds

28-Dez-20 12:57:26.505 - SLINGSHOT_LEFT mode=1 action #1 of 'FF_DOF,E110,-1'

28-Dez-20 12:57:26.518 - SLINGSHOT_FLASHER_LEFT mode=1 action #0 of 'FF_FLASHER,DV_FLOL,FL_ON,1,1,100,WHITE'

28-Dez-20 12:57:26.519 - SLINGSHOT_FLASHER_LEFT mode=1 action #1 of 'FF_COLOUR,WHITE,RGB_TT,200'

28-Dez-20 12:57:26.521 - SLINGSHOT_FLASHER_LEFT mode=1 action #2 of 'FF_B2S,B2SSTARTANIMATION,CLOUD1'

28-Dez-20 12:57:26.556 - Link is turning off device #3

28-Dez-20 12:57:26.612 - There are no OFF actions for SLINGSHOT_LEFT

28-Dez-20 12:57:26.614 - SLINGSHOT_FLASHER_LEFT mode=2 action #0 of 'FF_FLASHER,DV_FLOL,FL_OFF,1,1,100,WHITE'

28-Dez-20 12:57:26.757 - RIGHTFLIPPER mode=1 action #0 of 'FF_DEV,DV_RF,10000'

28-Dez-20 12:57:26.759 - Link is turning on device #2 for 10000 milliseconds

28-Dez-20 12:57:26.760 - RIGHTFLIPPER mode=1 action #1 of 'FF_DOF,E102,-1'

28-Dez-20 12:57:26.820 - LEFTFLIPPER mode=2 action #0 of 'FF_DEV,DV_LF,0'

28-Dez-20 12:57:26.821 - LEFTFLIPPER mode=2 action #1 of 'FF_DOF,E101,0'

28-Dez-20 12:57:26.822 - Link is turning off device #1

28-Dez-20 12:57:27.764 - RIGHTFLIPPER mode=2 action #0 of 'FF_DEV,DV_RF,0'

28-Dez-20 12:57:27.766 - RIGHTFLIPPER mode=2 action #1 of 'FF_DOF,E102,0'

28-Dez-20 12:57:27.767 - Link is turning off device #2

28-Dez-20 12:57:28.182 - RIGHTFLIPPER mode=1 action #0 of 'FF_DEV,DV_RF,10000'

28-Dez-20 12:57:28.184 - Link is turning on device #2 for 10000 milliseconds

28-Dez-20 12:57:28.186 - RIGHTFLIPPER mode=1 action #1 of 'FF_DOF,E102,-1'

28-Dez-20 12:57:28.425 - SENSOR_LEFT_ORBIT_HEAD mode=1 action #0 of 'FF_FLASHER,DV_FLIL,FL_TT,1,200,100,YELLOW'

28-Dez-20 12:57:28.426 - SENSOR_LEFT_ORBIT_HEAD mode=1 action #1 of 'FF_DOF,E411,-1'

28-Dez-20 12:57:28.427 - SENSOR_LEFT_ORBIT_HEAD mode=1 action #2 of 'FF_B2S,B2SSTARTANIMATION,WINDOW2'

28-Dez-20 12:57:28.447 - There are no OFF actions for SENSOR_LEFT_ORBIT_HEAD

28-Dez-20 12:57:28.864 - RIGHTFLIPPER mode=2 action #0 of 'FF_DEV,DV_RF,0'

28-Dez-20 12:57:28.866 - RIGHTFLIPPER mode=2 action #1 of 'FF_DOF,E102,0'

28-Dez-20 12:57:28.867 - Link is turning off device #2

28-Dez-20 12:57:28.880 - RIGHTFLIPPER mode=1 action #0 of 'FF_DEV,DV_RF,10000'

28-Dez-20 12:57:28.882 - Link is turning on device #2 for 10000 milliseconds

28-Dez-20 12:57:28.883 - RIGHTFLIPPER mode=1 action #1 of 'FF_DOF,E102,-1'

28-Dez-20 12:57:28.936 - RIGHTFLIPPER mode=2 action #0 of 'FF_DEV,DV_RF,0'

28-Dez-20 12:57:28.938 - RIGHTFLIPPER mode=2 action #1 of 'FF_DOF,E102,0'

28-Dez-20 12:57:28.939 - Link is turning off device #2

28-Dez-20 12:57:28.951 - SLINGSHOT_FLASHER_LEFT mode=1 action #0 of 'FF_FLASHER,DV_FLOL,FL_ON,1,1,100,WHITE'

28-Dez-20 12:57:28.953 - SLINGSHOT_FLASHER_LEFT mode=1 action #1 of 'FF_COLOUR,WHITE,RGB_TT,200'

28-Dez-20 12:57:28.954 - SLINGSHOT_FLASHER_LEFT mode=1 action #2 of 'FF_B2S,B2SSTARTANIMATION,CLOUD1'

28-Dez-20 12:57:28.956 - SLINGSHOT_FLASHER_RIGHT mode=1 action #0 of 'FF_FLASHER,DV_FLOR,FL_ON,1,1,100,WHITE'

28-Dez-20 12:57:28.957 - SLINGSHOT_FLASHER_RIGHT mode=1 action #1 of 'FF_COLOUR,WHITE,RGB_TT,200'

28-Dez-20 12:57:28.958 - SLINGSHOT_FLASHER_RIGHT mode=1 action #2 of 'FF_B2S,B2SSTARTANIMATION,STAR'

28-Dez-20 12:57:29.045 - SLINGSHOT_FLASHER_LEFT mode=2 action #0 of 'FF_FLASHER,DV_FLOL,FL_OFF,1,1,100,WHITE'

28-Dez-20 12:57:29.047 - SLINGSHOT_FLASHER_RIGHT mode=2 action #0 of 'FF_FLASHER,DV_FLOR,FL_OFF,1,1,100,WHITE'

28-Dez-20 12:57:29.059 - SLINGSHOT_FLASHER_LEFT mode=1 action #0 of 'FF_FLASHER,DV_FLOL,FL_ON,1,1,100,WHITE'

28-Dez-20 12:57:29.062 - SLINGSHOT_FLASHER_LEFT mode=1 action #1 of 'FF_COLOUR,WHITE,RGB_TT,200'

28-Dez-20 12:57:29.063 - SLINGSHOT_FLASHER_LEFT mode=1 action #2 of 'FF_B2S,B2SSTARTANIMATION,CLOUD1'

28-Dez-20 12:57:29.064 - SLINGSHOT_FLASHER_RIGHT mode=1 action #0 of 'FF_FLASHER,DV_FLOR,FL_ON,1,1,100,WHITE'

28-Dez-20 12:57:29.066 - SLINGSHOT_FLASHER_RIGHT mode=1 action #1 of 'FF_COLOUR,WHITE,RGB_TT,200'

28-Dez-20 12:57:29.068 - SLINGSHOT_FLASHER_RIGHT mode=1 action #2 of 'FF_B2S,B2SSTARTANIMATION,STAR'

28-Dez-20 12:57:29.137 - SLINGSHOT_FLASHER_LEFT mode=2 action #0 of 'FF_FLASHER,DV_FLOL,FL_OFF,1,1,100,WHITE'

28-Dez-20 12:57:29.139 - SLINGSHOT_FLASHER_RIGHT mode=2 action #0 of 'FF_FLASHER,DV_FLOR,FL_OFF,1,1,100,WHITE'

28-Dez-20 12:57:29.153 - SLINGSHOT_FLASHER_LEFT mode=1 action #0 of 'FF_FLASHER,DV_FLOL,FL_ON,1,1,100,WHITE'

28-Dez-20 12:57:29.154 - SLINGSHOT_FLASHER_LEFT mode=1 action #1 of 'FF_COLOUR,WHITE,RGB_TT,200'

28-Dez-20 12:57:29.155 - SLINGSHOT_FLASHER_LEFT mode=1 action #2 of 'FF_B2S,B2SSTARTANIMATION,CLOUD1'

28-Dez-20 12:57:29.157 - SLINGSHOT_FLASHER_RIGHT mode=1 action #0 of 'FF_FLASHER,DV_FLOR,FL_ON,1,1,100,WHITE'

28-Dez-20 12:57:29.158 - SLINGSHOT_FLASHER_RIGHT mode=1 action #1 of 'FF_COLOUR,WHITE,RGB_TT,200'

28-Dez-20 12:57:29.159 - SLINGSHOT_FLASHER_RIGHT mode=1 action #2 of 'FF_B2S,B2SSTARTANIMATION,STAR'

28-Dez-20 12:57:29.231 - SLINGSHOT_FLASHER_LEFT mode=2 action #0 of 'FF_FLASHER,DV_FLOL,FL_OFF,1,1,100,WHITE'

28-Dez-20 12:57:29.233 - SLINGSHOT_FLASHER_RIGHT mode=2 action #0 of 'FF_FLASHER,DV_FLOR,FL_OFF,1,1,100,WHITE'

28-Dez-20 12:57:29.240 - SENSOR_RIGHT_ORBIT mode=1 action #0 of 'FF_FLASHER,DV_FLIR,FL_TT,1,200,100,YELLOW'

28-Dez-20 12:57:29.242 - SENSOR_RIGHT_ORBIT mode=1 action #1 of 'FF_DOF,E413,-1'

28-Dez-20 12:57:29.243 - SENSOR_RIGHT_ORBIT mode=1 action #2 of 'FF_B2S,B2SSTARTANIMATION,WINDOW4'

28-Dez-20 12:57:29.315 - RIGHTFLIPPER mode=1 action #0 of 'FF_DEV,DV_RF,10000'

28-Dez-20 12:57:29.316 - Link is turning on device #2 for 10000 milliseconds

28-Dez-20 12:57:29.318 - RIGHTFLIPPER mode=1 action #1 of 'FF_DOF,E102,-1'

28-Dez-20 12:57:29.344 - There are no OFF actions for SENSOR_RIGHT_ORBIT

28-Dez-20 12:57:29.933 - LEFTFLIPPER mode=1 action #0 of 'FF_DEV,DV_LF,10000'

28-Dez-20 12:57:29.935 - Link is turning on device #1 for 10000 milliseconds

28-Dez-20 12:57:29.936 - LEFTFLIPPER mode=1 action #1 of 'FF_DOF,E101,-1'

28-Dez-20 12:57:29.938 - RIGHTFLIPPER mode=2 action #0 of 'FF_DEV,DV_RF,0'

28-Dez-20 12:57:29.939 - RIGHTFLIPPER mode=2 action #1 of 'FF_DOF,E102,0'

28-Dez-20 12:57:29.940 - Link is turning off device #2

28-Dez-20 12:57:30.750 - LEFTFLIPPER mode=2 action #0 of 'FF_DEV,DV_LF,0'

28-Dez-20 12:57:30.751 - LEFTFLIPPER mode=2 action #1 of 'FF_DOF,E101,0'

28-Dez-20 12:57:30.753 - Link is turning off device #1

28-Dez-20 12:57:30.760 - LEFTFLIPPER mode=1 action #0 of 'FF_DEV,DV_LF,10000'

28-Dez-20 12:57:30.762 - Link is turning on device #1 for 10000 milliseconds

28-Dez-20 12:57:30.763 - LEFTFLIPPER mode=1 action #1 of 'FF_DOF,E101,-1'

28-Dez-20 12:57:30.909 - LEFTFLIPPER mode=2 action #0 of 'FF_DEV,DV_LF,0'

28-Dez-20 12:57:30.910 - LEFTFLIPPER mode=2 action #1 of 'FF_DOF,E101,0'

28-Dez-20 12:57:30.911 - Link is turning off device #1

28-Dez-20 12:57:32.256 - LEFTFLIPPER mode=1 action #0 of 'FF_DEV,DV_LF,10000'

28-Dez-20 12:57:32.257 - Link is turning on device #1 for 10000 milliseconds

28-Dez-20 12:57:32.258 - LEFTFLIPPER mode=1 action #1 of 'FF_DOF,E101,-1'

28-Dez-20 12:57:32.486 - SENSOR_MINILOOP_RIGHT mode=1 action #0 of 'FF_B2S,B2SSTARTANIMATION,GUN'

28-Dez-20 12:57:32.488 - SENSOR_MINILOOP_RIGHT mode=1 action #1 of 'FF_DOF,E419,-1'

28-Dez-20 12:57:32.541 - There are no OFF actions for SENSOR_MINILOOP_RIGHT

28-Dez-20 12:57:32.966 - LEFTFLIPPER mode=2 action #0 of 'FF_DEV,DV_LF,0'

28-Dez-20 12:57:32.968 - LEFTFLIPPER mode=2 action #1 of 'FF_DOF,E101,0'

28-Dez-20 12:57:32.969 - Link is turning off device #1

28-Dez-20 12:57:33.259 - SENSOR_LEFT_ORBIT_HEAD mode=1 action #0 of 'FF_FLASHER,DV_FLIL,FL_TT,1,200,100,YELLOW'

28-Dez-20 12:57:33.260 - SENSOR_LEFT_ORBIT_HEAD mode=1 action #1 of 'FF_DOF,E411,-1'

28-Dez-20 12:57:33.262 - SENSOR_LEFT_ORBIT_HEAD mode=1 action #2 of 'FF_B2S,B2SSTARTANIMATION,WINDOW2'

28-Dez-20 12:57:33.311 - BUMPER_03 mode=1 action #0 of 'FF_DEV,DV_BC,-1'

28-Dez-20 12:57:33.313 - Link is turning on device #9 for 50 milliseconds

28-Dez-20 12:57:33.314 - BUMPER_03 mode=1 action #1 of 'FF_DOF,E122,-1'

28-Dez-20 12:57:33.370 - Link is turning off device #9

28-Dez-20 12:57:33.399 - There are no OFF actions for SENSOR_LEFT_ORBIT_HEAD

28-Dez-20 12:57:33.503 - BUMPER_02 mode=1 action #0 of 'FF_DEV,DV_BL,-1'

28-Dez-20 12:57:33.504 - Link is turning on device #8 for 50 milliseconds

28-Dez-20 12:57:33.506 - BUMPER_02 mode=1 action #1 of 'FF_DOF,E121,-1'

28-Dez-20 12:57:33.534 - There are no OFF actions for BUMPER_03

28-Dez-20 12:57:33.581 - Link is turning off device #8

28-Dez-20 12:57:33.657 - BUMPER_01 mode=1 action #0 of 'FF_DEV,DV_BR,-1'

28-Dez-20 12:57:33.659 - Link is turning on device #10 for 50 milliseconds

28-Dez-20 12:57:33.660 - BUMPER_01 mode=1 action #1 of 'FF_DOF,E120,-1'

28-Dez-20 12:57:33.711 - Link is turning off device #10

28-Dez-20 12:57:33.749 - There are no OFF actions for BUMPER_02

28-Dez-20 12:57:33.751 - BUMPER_03 mode=1 action #0 of 'FF_DEV,DV_BC,-1'

28-Dez-20 12:57:33.752 - Link is turning on device #9 for 50 milliseconds

28-Dez-20 12:57:33.754 - BUMPER_03 mode=1 action #1 of 'FF_DOF,E122,-1'

28-Dez-20 12:57:33.818 - Link is turning off device #9

28-Dez-20 12:57:33.889 - There are no OFF actions for BUMPER_01

28-Dez-20 12:57:33.983 - There are no OFF actions for BUMPER_03

28-Dez-20 12:57:34.204 - LEFTFLIPPER mode=1 action #0 of 'FF_DEV,DV_LF,10000'

28-Dez-20 12:57:34.206 - Link is turning on device #1 for 10000 milliseconds

28-Dez-20 12:57:34.207 - LEFTFLIPPER mode=1 action #1 of 'FF_DOF,E101,-1'

28-Dez-20 12:57:34.516 - BUMPER_02_SPIN mode=1 action #0 of 'FF_FLASHER,DV_FLCN,FL_ON,1,1,100,YELLOW_GREEN'

28-Dez-20 12:57:34.517 - BUMPER_02_SPIN mode=1 action #1 of 'FF_B2S,B2SSTARTANIMATION,FACE'

28-Dez-20 12:57:34.656 - BUMPER_01_SPIN mode=1 action #0 of 'FF_FLASHER,DV_FLIR,FL_ON,1,1,100,ROYAL_BLUE'

28-Dez-20 12:57:34.658 - BUMPER_01_SPIN mode=1 action #1 of 'FF_B2S,B2SSTARTANIMATION,CLOUD2'

28-Dez-20 12:57:34.747 - BUMPER_03_SPIN mode=1 action #0 of 'FF_FLASHER,DV_FLIL,FL_ON,1,1,100,DARK_RED'

28-Dez-20 12:57:34.748 - BUMPER_03_SPIN mode=1 action #1 of 'FF_B2S,B2SSTARTANIMATION,GUN'

28-Dez-20 12:57:35.091 - LEFTFLIPPER mode=2 action #0 of 'FF_DEV,DV_LF,0'

28-Dez-20 12:57:35.093 - LEFTFLIPPER mode=2 action #1 of 'FF_DOF,E101,0'

28-Dez-20 12:57:35.094 - Link is turning off device #1

28-Dez-20 12:57:36.317 - LEFTFLIPPER mode=1 action #0 of 'FF_DEV,DV_LF,10000'

28-Dez-20 12:57:36.319 - Link is turning on device #1 for 10000 milliseconds

28-Dez-20 12:57:36.320 - LEFTFLIPPER mode=1 action #1 of 'FF_DOF,E101,-1'

28-Dez-20 12:57:36.472 - LEFTFLIPPER mode=2 action #0 of 'FF_DEV,DV_LF,0'

28-Dez-20 12:57:36.474 - LEFTFLIPPER mode=2 action #1 of 'FF_DOF,E101,0'

28-Dez-20 12:57:36.475 - Link is turning off device #1

28-Dez-20 12:57:36.487 - LEFTFLIPPER mode=1 action #0 of 'FF_DEV,DV_LF,10000'

28-Dez-20 12:57:36.489 - Link is turning on device #1 for 10000 milliseconds

28-Dez-20 12:57:36.491 - LEFTFLIPPER mode=1 action #1 of 'FF_DOF,E101,-1'

28-Dez-20 12:57:36.550 - SENSOR_RIGHT_RAMP_HEAD mode=1 action #0 of 'FF_FLASHER,DV_FLOR,FL_TT,1,200,100,ROYAL_BLUE'

28-Dez-20 12:57:36.551 - SENSOR_RIGHT_RAMP_HEAD mode=1 action #1 of 'FF_DOF,E414,-1'

28-Dez-20 12:57:36.552 - SENSOR_RIGHT_RAMP_HEAD mode=1 action #2 of 'FF_B2S,B2SSTARTANIMATION,STAR'

28-Dez-20 12:57:36.596 - There are no OFF actions for SENSOR_RIGHT_RAMP_HEAD

28-Dez-20 12:57:36.947 - SLINGSHOT_FLASHER_LEFT mode=1 action #0 of 'FF_FLASHER,DV_FLOL,FL_ON,1,1,100,WHITE'

28-Dez-20 12:57:36.948 - SLINGSHOT_FLASHER_LEFT mode=1 action #1 of 'FF_COLOUR,WHITE,RGB_TT,200'

28-Dez-20 12:57:36.950 - SLINGSHOT_FLASHER_LEFT mode=1 action #2 of 'FF_B2S,B2SSTARTANIMATION,CLOUD1'

28-Dez-20 12:57:36.951 - SLINGSHOT_FLASHER_RIGHT mode=1 action #0 of 'FF_FLASHER,DV_FLOR,FL_ON,1,1,100,WHITE'

28-Dez-20 12:57:36.953 - SLINGSHOT_FLASHER_RIGHT mode=1 action #1 of 'FF_COLOUR,WHITE,RGB_TT,200'

28-Dez-20 12:57:36.954 - SLINGSHOT_FLASHER_RIGHT mode=1 action #2 of 'FF_B2S,B2SSTARTANIMATION,STAR'

28-Dez-20 12:57:37.014 - LEFTFLIPPER mode=2 action #0 of 'FF_DEV,DV_LF,0'

28-Dez-20 12:57:37.016 - LEFTFLIPPER mode=2 action #1 of 'FF_DOF,E101,0'

28-Dez-20 12:57:37.017 - Link is turning off device #1

28-Dez-20 12:57:37.023 - SLINGSHOT_FLASHER_LEFT mode=2 action #0 of 'FF_FLASHER,DV_FLOL,FL_OFF,1,1,100,WHITE'

28-Dez-20 12:57:37.025 - SLINGSHOT_FLASHER_RIGHT mode=2 action #0 of 'FF_FLASHER,DV_FLOR,FL_OFF,1,1,100,WHITE'

28-Dez-20 12:57:37.054 - SLINGSHOT_FLASHER_LEFT mode=1 action #0 of 'FF_FLASHER,DV_FLOL,FL_ON,1,1,100,WHITE'

28-Dez-20 12:57:37.056 - SLINGSHOT_FLASHER_LEFT mode=1 action #1 of 'FF_COLOUR,WHITE,RGB_TT,200'

28-Dez-20 12:57:37.057 - SLINGSHOT_FLASHER_LEFT mode=1 action #2 of 'FF_B2S,B2SSTARTANIMATION,CLOUD1'

28-Dez-20 12:57:37.058 - SLINGSHOT_FLASHER_RIGHT mode=1 action #0 of 'FF_FLASHER,DV_FLOR,FL_ON,1,1,100,WHITE'

28-Dez-20 12:57:37.060 - SLINGSHOT_FLASHER_RIGHT mode=1 action #1 of 'FF_COLOUR,WHITE,RGB_TT,200'

28-Dez-20 12:57:37.061 - SLINGSHOT_FLASHER_RIGHT mode=1 action #2 of 'FF_B2S,B2SSTARTANIMATION,STAR'

28-Dez-20 12:57:37.131 - SLINGSHOT_FLASHER_LEFT mode=2 action #0 of 'FF_FLASHER,DV_FLOL,FL_OFF,1,1,100,WHITE'

28-Dez-20 12:57:37.133 - SLINGSHOT_FLASHER_RIGHT mode=2 action #0 of 'FF_FLASHER,DV_FLOR,FL_OFF,1,1,100,WHITE'

28-Dez-20 12:57:37.147 - SLINGSHOT_FLASHER_LEFT mode=1 action #0 of 'FF_FLASHER,DV_FLOL,FL_ON,1,1,100,WHITE'

28-Dez-20 12:57:37.148 - SLINGSHOT_FLASHER_LEFT mode=1 action #1 of 'FF_COLOUR,WHITE,RGB_TT,200'

28-Dez-20 12:57:37.150 - SLINGSHOT_FLASHER_LEFT mode=1 action #2 of 'FF_B2S,B2SSTARTANIMATION,CLOUD1'

28-Dez-20 12:57:37.152 - SLINGSHOT_FLASHER_RIGHT mode=1 action #0 of 'FF_FLASHER,DV_FLOR,FL_ON,1,1,100,WHITE'

28-Dez-20 12:57:37.153 - SLINGSHOT_FLASHER_RIGHT mode=1 action #1 of 'FF_COLOUR,WHITE,RGB_TT,200'

28-Dez-20 12:57:37.154 - SLINGSHOT_FLASHER_RIGHT mode=1 action #2 of 'FF_B2S,B2SSTARTANIMATION,STAR'

28-Dez-20 12:57:37.223 - SLINGSHOT_FLASHER_LEFT mode=2 action #0 of 'FF_FLASHER,DV_FLOL,FL_OFF,1,1,100,WHITE'

28-Dez-20 12:57:37.225 - SLINGSHOT_FLASHER_RIGHT mode=2 action #0 of 'FF_FLASHER,DV_FLOR,FL_OFF,1,1,100,WHITE'

28-Dez-20 12:57:38.488 - RIGHTFLIPPER mode=1 action #0 of 'FF_DEV,DV_RF,10000'

28-Dez-20 12:57:38.489 - Link is turning on device #2 for 10000 milliseconds

28-Dez-20 12:57:38.491 - RIGHTFLIPPER mode=1 action #1 of 'FF_DOF,E102,-1'

28-Dez-20 12:57:38.830 - SENSOR_STAR_HOLE mode=1 action #0 of 'FF_DEV,DV_GR,750'

28-Dez-20 12:57:39.572 - RIGHTFLIPPER mode=2 action #0 of 'FF_DEV,DV_RF,0'

28-Dez-20 12:57:39.574 - RIGHTFLIPPER mode=2 action #1 of 'FF_DOF,E102,0'

28-Dez-20 12:57:39.576 - Link is turning off device #2

28-Dez-20 12:57:40.345 - There are no OFF actions for SENSOR_STAR_HOLE

28-Dez-20 12:57:41.229 - RIGHTFLIPPER mode=1 action #0 of 'FF_DEV,DV_RF,10000'

28-Dez-20 12:57:41.230 - Link is turning on device #2 for 10000 milliseconds

28-Dez-20 12:57:41.232 - RIGHTFLIPPER mode=1 action #1 of 'FF_DOF,E102,-1'

28-Dez-20 12:57:41.474 - RIGHTFLIPPER mode=2 action #0 of 'FF_DEV,DV_RF,0'

28-Dez-20 12:57:41.476 - RIGHTFLIPPER mode=2 action #1 of 'FF_DOF,E102,0'

28-Dez-20 12:57:41.477 - Link is turning off device #2

28-Dez-20 12:57:43.320 - RIGHTFLIPPER mode=1 action #0 of 'FF_DEV,DV_RF,10000'

28-Dez-20 12:57:43.321 - Link is turning on device #2 for 10000 milliseconds

28-Dez-20 12:57:43.323 - RIGHTFLIPPER mode=1 action #1 of 'FF_DOF,E102,-1'

28-Dez-20 12:57:44.773 - RIGHTFLIPPER mode=2 action #0 of 'FF_DEV,DV_RF,0'

28-Dez-20 12:57:44.775 - RIGHTFLIPPER mode=2 action #1 of 'FF_DOF,E102,0'

28-Dez-20 12:57:44.777 - Link is turning off device #2

28-Dez-20 12:57:45.193 - RIGHTFLIPPER mode=1 action #0 of 'FF_DEV,DV_RF,10000'

28-Dez-20 12:57:45.194 - Link is turning on device #2 for 10000 milliseconds

28-Dez-20 12:57:45.196 - RIGHTFLIPPER mode=1 action #1 of 'FF_DOF,E102,-1'

28-Dez-20 12:57:45.704 - SENSOR_STAR_HOLE mode=1 action #0 of 'FF_DEV,DV_GR,750'

28-Dez-20 12:57:46.075 - RIGHTFLIPPER mode=2 action #0 of 'FF_DEV,DV_RF,0'

28-Dez-20 12:57:46.077 - RIGHTFLIPPER mode=2 action #1 of 'FF_DOF,E102,0'

28-Dez-20 12:57:46.078 - Link is turning off device #2

28-Dez-20 12:57:47.221 - There are no OFF actions for SENSOR_STAR_HOLE

28-Dez-20 12:57:48.164 - RIGHTFLIPPER mode=1 action #0 of 'FF_DEV,DV_RF,10000'

28-Dez-20 12:57:48.165 - Link is turning on device #2 for 10000 milliseconds

28-Dez-20 12:57:48.166 - RIGHTFLIPPER mode=1 action #1 of 'FF_DOF,E102,-1'

28-Dez-20 12:57:48.365 - RIGHTFLIPPER mode=2 action #0 of 'FF_DEV,DV_RF,0'

28-Dez-20 12:57:48.367 - RIGHTFLIPPER mode=2 action #1 of 'FF_DOF,E102,0'

28-Dez-20 12:57:48.369 - Link is turning off device #2

28-Dez-20 12:57:48.952 - RIGHTFLIPPER mode=1 action #0 of 'FF_DEV,DV_RF,10000'

28-Dez-20 12:57:48.954 - Link is turning on device #2 for 10000 milliseconds

28-Dez-20 12:57:48.955 - RIGHTFLIPPER mode=1 action #1 of 'FF_DOF,E102,-1'

28-Dez-20 12:57:49.293 - RIGHTFLIPPER mode=2 action #0 of 'FF_DEV,DV_RF,0'

28-Dez-20 12:57:49.294 - RIGHTFLIPPER mode=2 action #1 of 'FF_DOF,E102,0'

28-Dez-20 12:57:49.296 - Link is turning off device #2

28-Dez-20 12:57:49.566 - SLINGSHOT_FLASHER_LEFT mode=1 action #0 of 'FF_FLASHER,DV_FLOL,FL_ON,1,1,100,WHITE'

28-Dez-20 12:57:49.568 - SLINGSHOT_FLASHER_LEFT mode=1 action #1 of 'FF_COLOUR,WHITE,RGB_TT,200'

28-Dez-20 12:57:49.570 - SLINGSHOT_FLASHER_LEFT mode=1 action #2 of 'FF_B2S,B2SSTARTANIMATION,CLOUD1'

28-Dez-20 12:57:49.572 - SLINGSHOT_FLASHER_RIGHT mode=1 action #0 of 'FF_FLASHER,DV_FLOR,FL_ON,1,1,100,WHITE'

28-Dez-20 12:57:49.573 - SLINGSHOT_FLASHER_RIGHT mode=1 action #1 of 'FF_COLOUR,WHITE,RGB_TT,200'

28-Dez-20 12:57:49.575 - SLINGSHOT_FLASHER_RIGHT mode=1 action #2 of 'FF_B2S,B2SSTARTANIMATION,STAR'

28-Dez-20 12:57:49.644 - SLINGSHOT_FLASHER_LEFT mode=2 action #0 of 'FF_FLASHER,DV_FLOL,FL_OFF,1,1,100,WHITE'

28-Dez-20 12:57:49.646 - SLINGSHOT_FLASHER_RIGHT mode=2 action #0 of 'FF_FLASHER,DV_FLOR,FL_OFF,1,1,100,WHITE'

28-Dez-20 12:57:49.659 - SLINGSHOT_FLASHER_LEFT mode=1 action #0 of 'FF_FLASHER,DV_FLOL,FL_ON,1,1,100,WHITE'

28-Dez-20 12:57:49.661 - SLINGSHOT_FLASHER_LEFT mode=1 action #1 of 'FF_COLOUR,WHITE,RGB_TT,200'

28-Dez-20 12:57:49.662 - SLINGSHOT_FLASHER_LEFT mode=1 action #2 of 'FF_B2S,B2SSTARTANIMATION,CLOUD1'

28-Dez-20 12:57:49.664 - SLINGSHOT_FLASHER_RIGHT mode=1 action #0 of 'FF_FLASHER,DV_FLOR,FL_ON,1,1,100,WHITE'

28-Dez-20 12:57:49.665 - SLINGSHOT_FLASHER_RIGHT mode=1 action #1 of 'FF_COLOUR,WHITE,RGB_TT,200'

28-Dez-20 12:57:49.666 - SLINGSHOT_FLASHER_RIGHT mode=1 action #2 of 'FF_B2S,B2SSTARTANIMATION,STAR'

28-Dez-20 12:57:49.736 - SLINGSHOT_FLASHER_LEFT mode=2 action #0 of 'FF_FLASHER,DV_FLOL,FL_OFF,1,1,100,WHITE'

28-Dez-20 12:57:49.738 - SLINGSHOT_FLASHER_RIGHT mode=2 action #0 of 'FF_FLASHER,DV_FLOR,FL_OFF,1,1,100,WHITE'

28-Dez-20 12:57:49.766 - SLINGSHOT_FLASHER_LEFT mode=1 action #0 of 'FF_FLASHER,DV_FLOL,FL_ON,1,1,100,WHITE'

28-Dez-20 12:57:49.768 - SLINGSHOT_FLASHER_LEFT mode=1 action #1 of 'FF_COLOUR,WHITE,RGB_TT,200'

28-Dez-20 12:57:49.770 - SLINGSHOT_FLASHER_LEFT mode=1 action #2 of 'FF_B2S,B2SSTARTANIMATION,CLOUD1'

28-Dez-20 12:57:49.772 - SLINGSHOT_FLASHER_RIGHT mode=1 action #0 of 'FF_FLASHER,DV_FLOR,FL_ON,1,1,100,WHITE'

28-Dez-20 12:57:49.774 - SLINGSHOT_FLASHER_RIGHT mode=1 action #1 of 'FF_COLOUR,WHITE,RGB_TT,200'

28-Dez-20 12:57:49.775 - SLINGSHOT_FLASHER_RIGHT mode=1 action #2 of 'FF_B2S,B2SSTARTANIMATION,STAR'

28-Dez-20 12:57:49.844 - SLINGSHOT_FLASHER_LEFT mode=2 action #0 of 'FF_FLASHER,DV_FLOL,FL_OFF,1,1,100,WHITE'

28-Dez-20 12:57:49.846 - SLINGSHOT_FLASHER_RIGHT mode=2 action #0 of 'FF_FLASHER,DV_FLOR,FL_OFF,1,1,100,WHITE'

28-Dez-20 12:57:50.194 - RIGHTFLIPPER mode=1 action #0 of 'FF_DEV,DV_RF,10000'

28-Dez-20 12:57:50.195 - Link is turning on device #2 for 10000 milliseconds

28-Dez-20 12:57:50.197 - RIGHTFLIPPER mode=1 action #1 of 'FF_DOF,E102,-1'

28-Dez-20 12:57:50.403 - SENSOR_LEFT_ORBIT_HEAD mode=1 action #0 of 'FF_FLASHER,DV_FLIL,FL_TT,1,200,100,YELLOW'

28-Dez-20 12:57:50.405 - SENSOR_LEFT_ORBIT_HEAD mode=1 action #1 of 'FF_DOF,E411,-1'

28-Dez-20 12:57:50.406 - SENSOR_LEFT_ORBIT_HEAD mode=1 action #2 of 'FF_B2S,B2SSTARTANIMATION,WINDOW2'

28-Dez-20 12:57:50.440 - There are no OFF actions for SENSOR_LEFT_ORBIT_HEAD

28-Dez-20 12:57:50.922 - RIGHTFLIPPER mode=2 action #0 of 'FF_DEV,DV_RF,0'

28-Dez-20 12:57:50.924 - RIGHTFLIPPER mode=2 action #1 of 'FF_DOF,E102,0'

28-Dez-20 12:57:50.925 - Link is turning off device #2

28-Dez-20 12:57:50.947 - SLINGSHOT_FLASHER_LEFT mode=1 action #0 of 'FF_FLASHER,DV_FLOL,FL_ON,1,1,100,WHITE'

28-Dez-20 12:57:50.949 - SLINGSHOT_FLASHER_LEFT mode=1 action #1 of 'FF_COLOUR,WHITE,RGB_TT,200'

28-Dez-20 12:57:50.950 - SLINGSHOT_FLASHER_LEFT mode=1 action #2 of 'FF_B2S,B2SSTARTANIMATION,CLOUD1'

28-Dez-20 12:57:50.952 - SLINGSHOT_FLASHER_RIGHT mode=1 action #0 of 'FF_FLASHER,DV_FLOR,FL_ON,1,1,100,WHITE'

28-Dez-20 12:57:50.953 - SLINGSHOT_FLASHER_RIGHT mode=1 action #1 of 'FF_COLOUR,WHITE,RGB_TT,200'

28-Dez-20 12:57:50.954 - SLINGSHOT_FLASHER_RIGHT mode=1 action #2 of 'FF_B2S,B2SSTARTANIMATION,STAR'

28-Dez-20 12:57:51.025 - SLINGSHOT_FLASHER_LEFT mode=2 action #0 of 'FF_FLASHER,DV_FLOL,FL_OFF,1,1,100,WHITE'

28-Dez-20 12:57:51.027 - SLINGSHOT_FLASHER_RIGHT mode=2 action #0 of 'FF_FLASHER,DV_FLOR,FL_OFF,1,1,100,WHITE'

28-Dez-20 12:57:51.041 - SLINGSHOT_FLASHER_LEFT mode=1 action #0 of 'FF_FLASHER,DV_FLOL,FL_ON,1,1,100,WHITE'

28-Dez-20 12:57:51.043 - SLINGSHOT_FLASHER_LEFT mode=1 action #1 of 'FF_COLOUR,WHITE,RGB_TT,200'

28-Dez-20 12:57:51.044 - SLINGSHOT_FLASHER_LEFT mode=1 action #2 of 'FF_B2S,B2SSTARTANIMATION,CLOUD1'

28-Dez-20 12:57:51.046 - SLINGSHOT_FLASHER_RIGHT mode=1 action #0 of 'FF_FLASHER,DV_FLOR,FL_ON,1,1,100,WHITE'

28-Dez-20 12:57:51.047 - SLINGSHOT_FLASHER_RIGHT mode=1 action #1 of 'FF_COLOUR,WHITE,RGB_TT,200'

28-Dez-20 12:57:51.048 - SLINGSHOT_FLASHER_RIGHT mode=1 action #2 of 'FF_B2S,B2SSTARTANIMATION,STAR'

28-Dez-20 12:57:51.202 - SENSOR_RIGHT_ORBIT mode=1 action #0 of 'FF_FLASHER,DV_FLIR,FL_TT,1,200,100,YELLOW'

28-Dez-20 12:57:51.204 - SENSOR_RIGHT_ORBIT mode=1 action #1 of 'FF_DOF,E413,-1'

28-Dez-20 12:57:51.205 - SENSOR_RIGHT_ORBIT mode=1 action #2 of 'FF_B2S,B2SSTARTANIMATION,WINDOW4'

28-Dez-20 12:57:51.226 - SLINGSHOT_FLASHER_LEFT mode=2 action #0 of 'FF_FLASHER,DV_FLOL,FL_OFF,1,1,100,WHITE'

28-Dez-20 12:57:51.228 - SLINGSHOT_FLASHER_RIGHT mode=2 action #0 of 'FF_FLASHER,DV_FLOR,FL_OFF,1,1,100,WHITE'

28-Dez-20 12:57:51.238 - RIGHTFLIPPER mode=1 action #0 of 'FF_DEV,DV_RF,10000'

28-Dez-20 12:57:51.239 - Link is turning on device #2 for 10000 milliseconds

28-Dez-20 12:57:51.241 - RIGHTFLIPPER mode=1 action #1 of 'FF_DOF,E102,-1'

28-Dez-20 12:57:51.278 - There are no OFF actions for SENSOR_RIGHT_ORBIT

28-Dez-20 12:57:51.882 - RIGHTFLIPPER mode=2 action #0 of 'FF_DEV,DV_RF,0'

28-Dez-20 12:57:51.884 - RIGHTFLIPPER mode=2 action #1 of 'FF_DOF,E102,0'

28-Dez-20 12:57:51.885 - Link is turning off device #2

28-Dez-20 12:57:53.903 - BALLOUT mode=1 action #0 of 'FF_FLASHER,DV_FLOL,FL_OFF,1,1,100,RANDOM'

28-Dez-20 12:57:53.905 - BALLOUT mode=1 action #1 of 'FF_FLASHER,DV_FLIL,FL_OFF,1,1,100,RANDOM'

28-Dez-20 12:57:53.906 - BALLOUT mode=1 action #2 of 'FF_FLASHER,DV_FLCN,FL_OFF,1,1,100,RANDOM'

28-Dez-20 12:57:53.908 - BALLOUT mode=1 action #3 of 'FF_FLASHER,DV_FLIR,FL_OFF,1,1,100,RANDOM'

28-Dez-20 12:57:53.909 - BALLOUT mode=1 action #4 of 'FF_FLASHER,DV_FLOR,FL_OFF,1,1,100,RANDOM'

28-Dez-20 12:57:53.911 - BALLOUT mode=1 action #5 of 'FF_DEV,DV_SR,0'

28-Dez-20 12:57:53.912 - BALLOUT mode=1 action #6 of 'FF_DEV,DV_BK,0'

28-Dez-20 12:57:53.913 - BALLOUT mode=1 action #7 of 'FF_B2S,B2SSTOPALLANIMATIONS'

28-Dez-20 12:57:53.915 - BALLOUT mode=1 action #8 of 'FF_DOF,E130,-1'

28-Dez-20 12:57:53.923 - There are no OFF actions for BALLOUT

28-Dez-20 12:57:54.842 - There are no OFF actions for GAMEMODE

28-Dez-20 12:58:03.370 - Activating process disappeared so stopping things

28-Dez-20 12:58:03.449 - DOFLinx device: 1 Initializing as Pinscape #1 with name=Pinscape Controller

28-Dez-20 12:58:03.449 - DOFLinx device:1 Pinscape setup with 65 outputs

28-Dez-20 12:58:03.449 - DOFLinx device: 2 Initializing as LEDWiz #1 with ID=0

28-Dez-20 12:58:03.449 - DOFLinx device:2 LEDWiz setup with 32 outputs

28-Dez-20 12:58:10.500 - Found valid process name of 'Pinball FX3'

28-Dez-20 12:58:10.500 - Setting FX3 process ID to :8580

28-Dez-20 12:58:12.524 - Activated by process name : 'Pinball FX3'

28-Dez-20 12:58:12.524 - Named process detected and startup commenced

28-Dez-20 12:58:13.824 - Attempt # 1 Failed to get disk file name from FX3 process information

28-Dez-20 12:58:13.824 - System.ComponentModel.Win32Exception (0x80004005): Only a part of the ReadProcessMemory or WriteProcessMemory request was completed

   at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)

   at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)

   at System.Diagnostics.Process.get_MainModule()

   at DOFLinx.MainForm.GetFX3EXEInfo()

28-Dez-20 12:58:15.129 - Attempt # 2 Failed to get disk file name from FX3 process information

28-Dez-20 12:58:15.129 - System.ComponentModel.Win32Exception (0x80004005): Only a part of the ReadProcessMemory or WriteProcessMemory request was completed

   at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)

   at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)

   at System.Diagnostics.Process.get_MainModule()

   at DOFLinx.MainForm.GetFX3EXEInfo()

28-Dez-20 12:58:16.462 - Attempt # 3 Failed to get disk file name from FX3 process information

28-Dez-20 12:58:16.462 - System.ComponentModel.Win32Exception (0x80004005): Only a part of the ReadProcessMemory or WriteProcessMemory request was completed

   at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)

   at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)

   at System.Diagnostics.Process.get_MainModule()

   at DOFLinx.MainForm.GetFX3EXEInfo()

28-Dez-20 12:58:17.766 - Attempt # 4 Failed to get disk file name from FX3 process information

28-Dez-20 12:58:17.768 - System.ComponentModel.Win32Exception (0x80004005): Only a part of the ReadProcessMemory or WriteProcessMemory request was completed

   at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)

   at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)

   at System.Diagnostics.Process.get_MainModule()

   at DOFLinx.MainForm.GetFX3EXEInfo()

28-Dez-20 12:58:19.056 - Attempt # 5 Failed to get disk file name from FX3 process information

28-Dez-20 12:58:19.058 - System.ComponentModel.Win32Exception (0x80004005): Only a part of the ReadProcessMemory or WriteProcessMemory request was completed

   at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)

   at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)

   at System.Diagnostics.Process.get_MainModule()

   at DOFLinx.MainForm.GetFX3EXEInfo()

28-Dez-20 12:58:20.342 - Attempt # 6 Failed to get disk file name from FX3 process information

28-Dez-20 12:58:20.344 - System.ComponentModel.Win32Exception (0x80004005): Only a part of the ReadProcessMemory or WriteProcessMemory request was completed

   at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)

   at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)

   at System.Diagnostics.Process.get_MainModule()

   at DOFLinx.MainForm.GetFX3EXEInfo()

28-Dez-20 12:58:21.630 - Attempt # 7 Failed to get disk file name from FX3 process information

28-Dez-20 12:58:21.632 - System.ComponentModel.Win32Exception (0x80004005): Only a part of the ReadProcessMemory or WriteProcessMemory request was completed

   at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)

   at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)

   at System.Diagnostics.Process.get_MainModule()

   at DOFLinx.MainForm.GetFX3EXEInfo()

28-Dez-20 12:58:22.918 - Attempt # 8 Failed to get disk file name from FX3 process information

28-Dez-20 12:58:22.920 - System.ComponentModel.Win32Exception (0x80004005): Only a part of the ReadProcessMemory or WriteProcessMemory request was completed

   at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)

   at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)

   at System.Diagnostics.Process.get_MainModule()

   at DOFLinx.MainForm.GetFX3EXEInfo()

28-Dez-20 12:58:24.199 - Attempt # 9 Failed to get disk file name from FX3 process information

28-Dez-20 12:58:24.201 - System.ComponentModel.Win32Exception (0x80004005): Only a part of the ReadProcessMemory or WriteProcessMemory request was completed

   at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)

   at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)

   at System.Diagnostics.Process.get_MainModule()

   at DOFLinx.MainForm.GetFX3EXEInfo()

28-Dez-20 12:58:25.488 - Attempt # 10 Failed to get disk file name from FX3 process information

28-Dez-20 12:58:25.490 - System.ComponentModel.Win32Exception (0x80004005): Only a part of the ReadProcessMemory or WriteProcessMemory request was completed

   at System.Diagnostics.NtProcessManager.GetModuleInfos(Int32 processId, Boolean firstModuleOnly)

   at System.Diagnostics.NtProcessManager.GetFirstModuleInfo(Int32 processId)

   at System.Diagnostics.Process.get_MainModule()

   at DOFLinx.MainForm.GetFX3EXEInfo()

28-Dez-20 12:58:25.996 - FX3 information process failed to get key information from FX3.EXE ..... now disabling the link

28-Dez-20 12:58:25.999 - Using full colour palette

28-Dez-20 12:58:26.001 - 122 colours added to the palette

28-Dez-20 12:58:26.002 - Turning on fixed out Device=1 Output=20

28-Dez-20 12:59:49.938 - Right flipper pressed

28-Dez-20 12:59:50.304 - Right flipper lifted

28-Dez-20 12:59:50.444 - Right flipper pressed

28-Dez-20 12:59:50.734 - Right flipper lifted

28-Dez-20 12:59:51.362 - Left flipper pressed

28-Dez-20 12:59:51.562 - Right flipper pressed

28-Dez-20 12:59:51.578 - Left flipper lifted

28-Dez-20 12:59:51.718 - Left flipper pressed

28-Dez-20 12:59:51.719 - Right flipper lifted

28-Dez-20 12:59:51.824 - Right flipper pressed

28-Dez-20 12:59:51.871 - Left flipper lifted

28-Dez-20 12:59:51.917 - Right flipper lifted

28-Dez-20 12:59:51.964 - Left flipper pressed

28-Dez-20 12:59:52.072 - Left flipper lifted

28-Dez-20 12:59:52.087 - Right flipper pressed

28-Dez-20 12:59:52.180 - Left flipper pressed

28-Dez-20 12:59:52.226 - Right flipper lifted

28-Dez-20 12:59:52.318 - Left flipper lifted

28-Dez-20 12:59:52.645 - Right flipper pressed

28-Dez-20 12:59:52.753 - Left flipper pressed

28-Dez-20 12:59:52.755 - Right flipper lifted

28-Dez-20 12:59:52.863 - Right flipper pressed

28-Dez-20 12:59:52.940 - Left flipper lifted

28-Dez-20 12:59:53.002 - Left flipper pressed

28-Dez-20 12:59:53.033 - Right flipper lifted

28-Dez-20 12:59:53.190 - Left flipper lifted

28-Dez-20 12:59:53.514 - Right flipper pressed

28-Dez-20 12:59:53.602 - Right flipper lifted

28-Dez-20 12:59:53.623 - Left flipper pressed

28-Dez-20 12:59:53.732 - Right flipper pressed

28-Dez-20 12:59:53.733 - Left flipper lifted

28-Dez-20 12:59:53.795 - Left flipper pressed

28-Dez-20 12:59:53.797 - Right flipper lifted

28-Dez-20 12:59:53.904 - Right flipper pressed

28-Dez-20 12:59:53.905 - Left flipper lifted

28-Dez-20 12:59:53.966 - Left flipper pressed

28-Dez-20 12:59:53.997 - Right flipper lifted

28-Dez-20 12:59:54.106 - Left flipper lifted

28-Dez-20 12:59:54.598 - Right flipper pressed

28-Dez-20 12:59:55.596 - Right flipper lifted

28-Dez-20 12:59:55.897 - Left flipper pressed

28-Dez-20 12:59:55.998 - Right flipper pressed

28-Dez-20 12:59:56.077 - Left flipper lifted

28-Dez-20 12:59:56.123 - Right flipper lifted

28-Dez-20 13:00:04.166 - Activating process disappeared so stopping things

28-Dez-20 13:00:04.213 - DOFLinx device: 1 Initializing as Pinscape #1 with name=Pinscape Controller

28-Dez-20 13:00:04.213 - DOFLinx device:1 Pinscape setup with 65 outputs

28-Dez-20 13:00:04.213 - DOFLinx device: 2 Initializing as LEDWiz #1 with ID=0

28-Dez-20 13:00:04.213 - DOFLinx device:2 LEDWiz setup with 32 outputs

 

thank you and regards,

Lasse

[DDH69]

Sorry to say, but there is now little more I can do.  DOFLinx is now handling the error returned by Windows and reattempting the action 10x.  The same action is sometimes working and sometimes not on your machine.  As I said earlier, yours is the first to ever exhibit this behaviour.  I now suspect the core issue may be more Windows or permission based.

 

The good news is that the error message is now fully exposed being "(0x80004005): Only a part of the ReadProcessMemory or WriteProcessMemory request was completed".  There are many reports of this and many purported solutions when you Goggle it.  I can only suggest you have a read of these.  I will be here to bunce any ideas off, but there is nothing more I am aware of that I can do for you.

 

Not sure if this will help, but the DotNet function your system is failing at is;

TheEXEName = FX3Process.MainModule.FileName

Where TheEXEName is a string variable.  The DotNet function is get of the disk file name associated with the running process, https://docs.microso...me?view=net-5.0

 

I know we no longer recommend this, but have you tried running DOFLinx as admin?  In the reading I did now that we can see this error, there are some reports of Windows permissions.  Having said that, the random nature of the success and fail on your machine makes this unlikely.

[wiesshund]

Well, that one is a bit of a pain in the ass, as the permission issue could even be down in the NTFS permissions level

corrupted permissions on a file or folder.

 

for those usually the easiest, and in the long term, the fastest unless you know the exact file or folder in question
is back up all the important goodies

 

format the HDD, and reload the OS

 

You are formatting because if you reload in place, the permissions and owners info on the folders persists through the reload

And if you back up all your stuff to fat32 formatted media, any ntfs permission flags on individual files will basically be left behind in the process

 

It isnt as bad as it sounds, cause most of your set up can be backed up intact

even the registry settings.

So you format, load the OS, load in your device drivers

You run a few installers, like VPX, just to go through the formality so the components get registered

then drop your pinball content back in the appropriate places and import your registry keys that you backed up

 

and you should not have to do any of it in admin mode, unless windows asks for elevation.
And since i do not think any of our collective pinball software winds up going to program files etc, that should not be very many elevation requests
 

[Lasse73]

Hi DDH69

 

thank you very much for your big effort to help. Will read about the 0x80004005-issue and if I find a way to fix it I will let you know.

My PC runs with .NET Framework 3.5 and 4.8. Probably try to download 5.0 and try then.

 

kind regards,

Lasse

Edited by Lasse73, 29 December 2020 - 10:45 AM.

[DDH69]

The target framework for DOFLinx is 4.6.1. So in theory anything from that framework onward should work fine.

[Lasse73]

Hi wiesshund

 

thanks for the suggestion. I have set up the whole build the third time in a row on a fresh formatted SSD. I did Face the same Issue with .NET Framework on each fresh install.

 

Not sure now in which direction I will go now.

 

kind regards,

Lars

[wiesshund]

 I have set up the whole build the third time in a row on a fresh formatted SSD.

 

Ok, now i am boggled

[Lasse73]

What is a mystery to me, is that I had to place the "directoutputconfig51.ini" besides the "config-folder" also into the "DirectOutput"-Folder to get run it.
But I think that was only an invalid assumption, since it is working randomly.

Just as an Idea since I do not have insight to the code. Could it be that it would resolve my Issue if the variable is hard coded instead of reading it out of the system?

 

I did tests with running it as an admin. But not with the Beta-Versions. I head to my Cab and I will try it.

Edited by Lasse73, 29 December 2020 - 11:13 AM.

[Lasse73]

Hi DDH69

 

just want to inform you that I played around with Admin-Rights. No success.

 

But I do have good but also weird news.

Since I was curious I tried what happens if I launch FX3 out of Popper. And it worked almost flawless. Just some minor issues.

If you like I'll post the log. But I did run it with the "Bug-Mode" set on 1.

Probably an Issue in FX3 itself caused by an update?

 

Kind regards,

Lars

Edited by Lasse73, 29 December 2020 - 02:51 PM.

[wiesshund]

Are any of your pinball related apps installed into non user folders?

 

The only thing i can think of, permissions wise, that might cause a denial of something someplace along the way
That would follow you from a fresh format and install to another one.

 

Non user folder meaning into any parent folder that your user account does not explicitly own

for example c:\program files, c:\program files(x86)

[Lasse73]

Yes, my Pinball stuff is all direct under c:\.

All like suggested in Major Frenchys, Terry Reds and Nailbusters tutorials.

The only exception is FX3 which is in standard installation-folder under c:\program files(x86)\steam etc.

 

Anyhow, it's weird that it is running out of Popper.

Edited by Lasse73, 29 December 2020 - 08:33 PM.

[DDH69]

Hi DDH69

 

just want to inform you that I played around with Admin-Rights. No success.

 

But I do have good but also weird news.

Since I was curious I tried what happens if I launch FX3 out of Popper. And it worked almost flawless. Just some minor issues.

If you like I'll post the log. But I did run it with the "Bug-Mode" set on 1.

Probably an Issue in FX3 itself caused by an update?

 

Kind regards,

Lars

 

I'll be interested to have a look.  I can't see how that would stop connection to a process, but I learn something new every day!

[wiesshund]

Yes, my Pinball stuff is all direct under c:\.

All like suggested in Major Frenchys, Terry Reds and Nailbusters tutorials.

The only exception is FX3 which is in standard installation-folder under c:\program files(x86)\steam etc.

 

Anyhow, it's weird that it is running out of Popper.

 Is this issue only happening in FX3?

 

If so i have 1 suggestion

 

Install steam and FX3 (which you can just cut and paste into the new steam folder and have it file check it rather that reinstall FX3)

into c:\steam

 

I have steam in d:\games\steam so that it is outside any os file\folder restrictions

[Lasse73]

Looked shortly into the Log-File. Boggling that the 0x80004005 shows up in the log but it worked anyways. B2S changed always, LEDs worked and Toys too. 

Will redo the Test once again tomorrow.

 

Is it possible to send the log in an other way than this forum? Would need to post at least 40 times since the log is that huge.

 

Yes, my Pinball stuff is all direct under c:\.

All like suggested in Major Frenchys, Terry Reds and Nailbusters tutorials.

The only exception is FX3 which is in standard installation-folder under c:\program files(x86)\steam etc.

 

Anyhow, it's weird that it is running out of Popper.

 Is this issue only happening in FX3?

 

If so i have 1 suggestion

 

Install steam and FX3 (which you can just cut and paste into the new steam folder and have it file check it rather that reinstall FX3)

into c:\steam

 

I have steam in d:\games\steam so that it is outside any os file\folder restrictions

 

 

Yes, only FX3. But I do not run any other Emulators which use DOFLinx. The only other Emulator I use is VPX.

 

Thank you, I will try that.

[DDH69]

 

Is it possible to send the log in an other way than this forum? Would need to post at least 40 times since the log is that huge.

 

Just zip it and attach as a file to your post, otherwise put it on your favourite share point and post a shared link.

[Lasse73]

 

 

Is it possible to send the log in an other way than this forum? Would need to post at least 40 times since the log is that huge.

 

Just zip it and attach as a file to your post, otherwise put it on your favourite share point and post a shared link.

 

 

 

https://drive.google...iew?usp=sharing

[wiesshund]

Lasse

I am simply curious

 

As FP/BAM also uses DOFLinx

could you by any chance install FP/BAM, and 1 DOFLinx table
For FP setup you only need to put a copy of DOFLinx.vbs in the FP scripts folder

 

Here is a table to test with, it has DOF
https://www.vpforums...&showfile=12406

 

I am simply wondering if this is a global issue, or only FX3?

[Lasse73]

Lasse

I am simply curious

 

As FP/BAM also uses DOFLinx

could you by any chance install FP/BAM, and 1 DOFLinx table
For FP setup you only need to put a copy of DOFLinx.vbs in the FP scripts folder

 

Here is a table to test with, it has DOF
https://www.vpforums...&showfile=12406

 

I am simply wondering if this is a global issue, or only FX3?

 

As DDH69 mentioned, this behavior is not representative. He never saw it before. I think this is related to my Sys-Architecture. Therefore I would not take it to compare.

 

I'm on the last things to get my Cab finished (closing Backbox, putting PF into the cab etc).

It took me very long due to software-massacre and I'm eager to have a session soon.

Once stable and enjoyed it a bit I will do it with an additional SSD. Will let you know.