4027 replies to this topic

[toxie]

 

1st crash

only opened new table

and moved a GI lamp

Crash report VPX rev202 (9adbae3)
============
Process: VPinballX.exe
Reason: 0xC0000005 - EXCEPTION_ACCESS_VIOLATION at 0023:0042817B
Attempt to write to 0x15278554
Thread ID: 0xF74 [3956]

Call stack
==========
0042817B VPinballX.exe (0x00000010 0x00000000 0x00000000 0x00090700)
004E9BB4 VPinballX.exe (0x00000010 0x00000000 0x00000000 0x00000010)
00427C77 VPinballX.exe (0x00427C20 0x00090700 0x00000010 0x00000000)
74F15E7A USER32.dll GetClassLongW + 0x7AA (0x00427C20 0x00000000 0x00000010 0x00000000)
74F15259 USER32.dll GetSystemMetricsForDpi + 0x1449 (0x03834E50 0x00000000 0x00000000 0x00000001)
74F021D9 USER32.dll SendMessageA + 0x49 (0x00090700 0x00000010 0x00000000 0x00000000)
0056A525 VPinballX.exe (0x00000111 0x000080ED 0x00000000 0x00020784)
00557FE5 VPinballX.exe (0x00000111 0x000080ED 0x00000000 0x00000111)
00427C77 VPinballX.exe (0x00427C20 0x00020784 0x00000111 0x000080ed)
74F15E7A USER32.dll GetClassLongW + 0x7AA (0x00427C20 0x00000000 0x00000111 0x000080ed)
74F15259 USER32.dll GetSystemMetricsForDpi + 0x1449 (0x03826AB0 0x00000000 0x00000000 0x00000001)
74F021D9 USER32.dll SendMessageA + 0x49 (0x00020784 0x00000111 0x000080ED 0x00000000)
004E6D3A VPinballX.exe (0x00000000 0x00000001 0x0019F248 0x002fb000)
005C8F10 VPinballX.exe (0x00000000 0x00000001 0x002FB000 0x007528f0)
005B5520 VPinballX.exe (0x00400000 0x00000000 0x032D2859 0x00000001)
005E2261 VPinballX.exe (0x002FB000 0x7574FA10 0x0019FFDC 0x76fb7a9e)
7574FA29 KERNEL32.DLL BaseThreadInitThunk + 0x19 (0x002FB000 0x4EA51B27 0x00000000 0x00000000)
76FB7A9E ntdll.dll RtlGetAppContainerNamedObjectPath + 0x11E (0xFFFFFFFFFFFFFFFF 0x76FD8A45 0x00000000 0x00000000)
76FB7A6E ntdll.dll RtlGetAppContainerNamedObjectPath + 0xEE (0x02F882A0 0x002FB000 0x00000000 0x78746341)

Environment
===========
Date/time: 11/6/2021, 17:02:35:735
Number of CPUs: 4
Processor type: 586
System: Windows 10 (10.0 19043)

Memory status
=============
Total Reserved: 133616K (130M) bytes
Total Commited: 405276K (395M) bytes
Total Free: 3655348K (3569M) bytes
Largest Free: 2095424K (2046M) bytes

Registers
=========
EAX=00000000 EBX=00000000 ECX=FFFFFFFF EDX=03372400
ESI=15278550 EDI=00000010 EBP=0019FFEC ESP=0019FFE4 EIP=76FB7A6E
FLG=00010216 CS=0023 DS=002B SS=002B ES=002B FS=0053 GS=002B


Failed to save minidump.

Is this deterministic for you? Cause i cannot repro.

 when i launch vpinmame the version is 3.4 and if i open up vpx it says the version is 10.7.  All of the tables seem to work except when i try a new one.  It says im running ver 10.6 and the table is 10.7 and of course the playfield is just white.
 

 

This confuses me. 'It says im running ver 10.6': Who is 'it'? Cause two sentences before you say VPX says 10.7.

Lazy question of the day:

If I am updating from the last release candidate can I just update the executive? Or at least skip the scripts folder. I like to avoid having to update the scripts for my configuration after I update. Thanks.
 

You should also update the scripts.. And i guess the only thing you changed is in VPMKeys.vbs? These changes you would have to copy over from the old one.

[wiesshund]

 

 

1st crash

only opened new table

and moved a GI lamp

Crash report VPX rev202 (9adbae3)
============
Process: VPinballX.exe
Reason: 0xC0000005 - EXCEPTION_ACCESS_VIOLATION at 0023:0042817B
Attempt to write to 0x15278554
Thread ID: 0xF74 [3956]

Call stack
==========
0042817B VPinballX.exe (0x00000010 0x00000000 0x00000000 0x00090700)
004E9BB4 VPinballX.exe (0x00000010 0x00000000 0x00000000 0x00000010)
00427C77 VPinballX.exe (0x00427C20 0x00090700 0x00000010 0x00000000)
74F15E7A USER32.dll GetClassLongW + 0x7AA (0x00427C20 0x00000000 0x00000010 0x00000000)
74F15259 USER32.dll GetSystemMetricsForDpi + 0x1449 (0x03834E50 0x00000000 0x00000000 0x00000001)
74F021D9 USER32.dll SendMessageA + 0x49 (0x00090700 0x00000010 0x00000000 0x00000000)
0056A525 VPinballX.exe (0x00000111 0x000080ED 0x00000000 0x00020784)
00557FE5 VPinballX.exe (0x00000111 0x000080ED 0x00000000 0x00000111)
00427C77 VPinballX.exe (0x00427C20 0x00020784 0x00000111 0x000080ed)
74F15E7A USER32.dll GetClassLongW + 0x7AA (0x00427C20 0x00000000 0x00000111 0x000080ed)
74F15259 USER32.dll GetSystemMetricsForDpi + 0x1449 (0x03826AB0 0x00000000 0x00000000 0x00000001)
74F021D9 USER32.dll SendMessageA + 0x49 (0x00020784 0x00000111 0x000080ED 0x00000000)
004E6D3A VPinballX.exe (0x00000000 0x00000001 0x0019F248 0x002fb000)
005C8F10 VPinballX.exe (0x00000000 0x00000001 0x002FB000 0x007528f0)
005B5520 VPinballX.exe (0x00400000 0x00000000 0x032D2859 0x00000001)
005E2261 VPinballX.exe (0x002FB000 0x7574FA10 0x0019FFDC 0x76fb7a9e)
7574FA29 KERNEL32.DLL BaseThreadInitThunk + 0x19 (0x002FB000 0x4EA51B27 0x00000000 0x00000000)
76FB7A9E ntdll.dll RtlGetAppContainerNamedObjectPath + 0x11E (0xFFFFFFFFFFFFFFFF 0x76FD8A45 0x00000000 0x00000000)
76FB7A6E ntdll.dll RtlGetAppContainerNamedObjectPath + 0xEE (0x02F882A0 0x002FB000 0x00000000 0x78746341)

Environment
===========
Date/time: 11/6/2021, 17:02:35:735
Number of CPUs: 4
Processor type: 586
System: Windows 10 (10.0 19043)

Memory status
=============
Total Reserved: 133616K (130M) bytes
Total Commited: 405276K (395M) bytes
Total Free: 3655348K (3569M) bytes
Largest Free: 2095424K (2046M) bytes

Registers
=========
EAX=00000000 EBX=00000000 ECX=FFFFFFFF EDX=03372400
ESI=15278550 EDI=00000010 EBP=0019FFEC ESP=0019FFE4 EIP=76FB7A6E
FLG=00010216 CS=0023 DS=002B SS=002B ES=002B FS=0053 GS=002B


Failed to save minidump.

Is this deterministic for you? Cause i cannot repro.

 

 

It did it twice, and now, i cant make it do it again

figures

Hello, I've been away for about a year and decided to update everything and try some of the new tables out.  I was running vpinmame 3.3 and vpx 10.6.  I uninstalled vpinmame and installed 3.4 and have overwritter the last couple of RC's for vpx (192 and 202 now).  when i launch vpinmame the version is 3.4 and if i open up vpx it says the version is 10.7.  All of the tables seem to work except when i try a new one.  It says im running ver 10.6 and the table is 10.7 and of course the playfield is just white.  What am I missing?  Any help would be appreciated.

 

Thanks

 

Well, it sounds like either you have 2 exe's and the 10.7 is not the default
or you did not overwrite VPinballX.exe

if you renamed the 10.7 exe to something like vpinballX 10.7.exe etc, the tables will not open with it by default
You would need to rename 10.6's exe to vpinballX 10.6.exe and then extract the 10.7 beta right into the exact same folder visual pinball is running from now, and allow to overwrite everything.

 

FYI, you did not need to uninstall vpinmame, just unzip over it, then run setup and click install to re-register

you should overwrite, I rename the old VPX executable because I have to use it to properly configure my resolution... I can't use the beta to change anything graphical so that's my workaround although I'm quite a few revisions behind at this point.

for rotate OS, keep the old exe for screen changing, for now

New one still does not detect a rotated OS properly

[reggert32]

Just 2 quick questions : From Github is it better to use the x86 or the x64 executable ? Is there any difference ?

[jpsalas]

For now the most compatible version is the x86, since all the other programs must also be x86 versions, like vpinmame and/or b2sServer, and this B2sServer is only x86 for now.

 

Differences? Not really, but the x64 version allows for bigger tables as it can use more ram than the x86 (which is limited to 3Gb). But there are no tables that need so much ram

Edited by jpsalas, 12 June 2021 - 12:21 PM.

[reggert32]

ok, thanks for the clear answer

[movieguy]

Thanks for the response. It only takes a minute or two to update the scripts for my coin door and tilt bob. As I said, it was a lazy question.


Sent from my iPhone using Tapatalk

[wiesshund]

Thanks for the response. It only takes a minute or two to update the scripts for my coin door and tilt bob. As I said, it was a lazy question.


Sent from my iPhone using Tapatalk

I just delete vpmkeys from the zip before extracting

[mjr1313]

Thanks for the help I resolved the issue.  It was an old shortcut i wasnt even aware I was using.

Edited by mjr1313, 12 June 2021 - 03:17 PM.

[fuzzel]

Just a reminder, this thread is about testing the beta version of 10.7 and not a support topic for setups.
If you have problems with your setup then please start a new support thread.

Edited by fuzzel, 12 June 2021 - 02:44 PM.

[RYSr]

Have a problem with v202rc, I had v185rc installed previously, I copied all the v202rc files over the previous install. I tried running the just released version of Eight Ball Champ by selecting it from the open window that auto pops-up when you start VPX. the table and back glass loads but their no activity on either. IF I click on the table to put it focus nothing happens and I can't even escape out of the table. If I Alt-Tab back to the editor the table area is blank and the file open window is displaying. I had to close the editor to exit. I tried rebooting to clear my PC's memorybut had same result. I then tried recent released version 007 table same problem. The I tried Freddy Nightmare on elm street and it worked fine.

I ran v185rc and have no problems running any of the 3 tables.

I found that if I load v202rc and don't use the file open window that auto loads on startup, and just close it then select file open from the drop down menu I can play all three tables with no problem.

Here is the crash.txt from when it didn't load:

Crash report VPX rev202 (9adbae3)
============
Process: VPinballX - v202.exe
Reason: 0xC0000005 - EXCEPTION_ACCESS_VIOLATION at 0023:004E9D4D
Attempt to read from 0x00002000
Thread ID: 0x5BC [1468]

Call stack
==========
004E9D4D VPinballX - v202.exe (0x00000002 0x00000000 0x00000000 0x00427c20)
00427C77 VPinballX - v202.exe (0x00427C20 0x000D051C 0x00000002 0x00000000)
77649261 USER32.dll CallNextHookEx + 0x311 (0x00427C20 0x00000000 0x00000002 0x00000000)
776494BC USER32.dll CallNextHookEx + 0x56C (0x034AD1D0 0x00000000 0x00000002 0x00000000)
776496B9 USER32.dll CallNextHookEx + 0x769 (0x0018DCC0 0x00000000 0x0018DF20 0x77d00350)
77D00406 ntdll.dll KiUserCallbackDispatcher + 0x36 (0x00000010 0x00000000 0x00000000 0x000d051c)
004E9BB4 VPinballX - v202.exe (0x00000010 0x00000000 0x00000000 0x00427c20)
00427C77 VPinballX - v202.exe (0x00427C20 0x000D051C 0x00000010 0x00000000)
77649261 USER32.dll CallNextHookEx + 0x311 (0x00427C20 0x00000000 0x00000010 0x00000000)
77677446 USER32.dll EndTask + 0xF06 (0x034AD1D0 0x00000000 0x00000000 0x00000001)
77672370 USER32.dll SendMessageA + 0x50 (0x000D051C 0x00000010 0x00000000 0x00000000)
005C9103 VPinballX - v202.exe (0x00000000 0xFFFFFFFFFFFFFFFF 0x00000000 0x059cff04)
777DC3A6 GDI32.dll ExtTextOutW + 0xE6 (0x00560055 0x00000000 0x00000000 0x00000000)
0048005C VPinballX - v202.exe (0x72000010 0xFFFFFFFFFC498B14 0x2B23C283 0xfffffffffcc083c1)
00FA81C1 VPinballX - v202.exe (0x72000010 0xFFFFFFFFFC498B10 0x2B23C283 0xfffffffffcc083c1)
00FA81C1 VPinballX - v202.exe (0xFFFFFFFFFC498B10 0x2B23C283 0xFFFFFFFFFCC083C1 0x771ff883)
72000010  (0x2B23C283 0xFFFFFFFFFCC083C1 0x771FF883 0xffffffffe851524e)
FC498B10  (0xFFFFFFFFFCC083C1 0x771FF883 0xFFFFFFFFE851524E 0x001a1e9c)
2B23C283  (0x771FF883 0xFFFFFFFFE851524E 0x001A1E9C 0xffffffff8b08c483)
FCC083C1  (0xFFFFFFFFE851524E 0x001A1E9C 0xFFFFFFFF8B08C483 0xffffffffd285e455)
771FF883 CRYPT32.dll CertFreeCertificateChainEngine + 0x11EE3 (0x001A1E9C 0xFFFFFFFF8B08C483 0xFFFFFFFFD285E455 0x4d8b2c74)
E851524E  (0xFFFFFFFF8B08C483 0xFFFFFFFFD285E455 0x4D8B2C74 0x2bc28bec)
001A1E9C  (0xFFFFFFFFD285E455 0x4D8B2C74 0x2BC28BEC 0xfffffffffce183ca)
8B08C483  (0x4D8B2C74 0x2BC28BEC 0xFFFFFFFFFCE183CA 0x1000f981)
D285E4554D8B2C742BC28BECFCE183CA1000F981 FreeImag
Environment
===========
Date/time: 12/6/2021, 15:10:28:187
Number of CPUs: 4
Processor type: 586
System: Unknown Windows version - 6.3 (9600)

Memory status
=============
Total Reserved: 137316K (134M) bytes
Total Commited: 414192K (404M) bytes
Total Free: 3642732K (3557M) bytes
Largest Free: 2095264K (2046M) bytes

Registers
=========
EAX=00002000 EBX=00000000 ECX=07097684 EDX=0018DA68
ESI=0B6FF790 EDI=00000000 EBP=FCE183CA ESP=0044010F EIP=1000F981
FLG=00210206 CS=0023 DS=002B SS=002B ES=002B FS=0053 GS=002B


 

[wiesshund]

Have a problem with v202rc, I had v185rc installed previously, I copied all the v202rc files over the previous install. I tried running the just released version of Eight Ball Champ by selecting it from the open window that auto pops-up when you start VPX. the table and back glass loads but their no activity on either. IF I click on the table to put it focus nothing happens and I can't even escape out of the table. If I Alt-Tab back to the editor the table area is blank and the file open window is displaying. I had to close the editor to exit. I tried rebooting to clear my PC's memorybut had same result. I then tried recent released version 007 table same problem. The I tried Freddy Nightmare on elm street and it worked fine.

I ran v185rc and have no problems running any of the 3 tables.

I found that if I load v202rc and don't use the file open window that auto loads on startup, and just close it then select file open from the drop down menu I can play all three tables with no problem.

Here is the crash.txt from when it didn't load:

 

 

The tables that crash
Do they load properly when the table file is double clicked, or does it crash then also?

[toxie]

Could be that my recent change caused this. Will look into it, thanks for the report!

[toxie]

Have a problem with v202rc, I had v185rc installed previously, I copied all the v202rc files over the previous install. I tried running the just released version of Eight Ball Champ by selecting it from the open window that auto pops-up when you start VPX. the table and back glass loads but their no activity on either. IF I click on the table to put it focus nothing happens and I can't even escape out of the table. If I Alt-Tab back to the editor the table area is blank and the file open window is displaying. I had to close the editor to exit. I tried rebooting to clear my PC's memorybut had same result. I then tried recent released version 007 table same problem. The I tried Freddy Nightmare on elm street and it worked fine.

I ran v185rc and have no problems running any of the 3 tables.

I found that if I load v202rc and don't use the file open window that auto loads on startup, and just close it then select file open from the drop down menu I can play all three tables with no problem.

 

Can you please retry with https://github.com/v...7.0-203-6b4fe14 (cause i cannot repro :/)

[RYSr]

 

Have a problem with v202rc, I had v185rc installed previously, I copied all the v202rc files over the previous install. I tried running the just released version of Eight Ball Champ by selecting it from the open window that auto pops-up when you start VPX. the table and back glass loads but their no activity on either. IF I click on the table to put it focus nothing happens and I can't even escape out of the table. If I Alt-Tab back to the editor the table area is blank and the file open window is displaying. I had to close the editor to exit. I tried rebooting to clear my PC's memorybut had same result. I then tried recent released version 007 table same problem. The I tried Freddy Nightmare on elm street and it worked fine.

I ran v185rc and have no problems running any of the 3 tables.

I found that if I load v202rc and don't use the file open window that auto loads on startup, and just close it then select file open from the drop down menu I can play all three tables with no problem.

 

Can you please retry with https://github.com/v...7.0-203-6b4fe14 (cause i cannot repro :/)

 

 

@wiesshund

I can single click or double click same result with v202

 

@Toxie

With v203 from Get-Hub all 3 tables load and run properly, however when I escape or quit to editor the table unloads from the table view and pops up the file open window still.

Edited by RYSr, 12 June 2021 - 09:09 PM.

[toxie]

Yes, this is supposed to be the new behavior. So kinda like a very very very simplistic front-end that lets you choose a new table after each game. Cancel then exits to 'normal' VP mode.

Thanks for the quick testing of the fix!

[RYSr]

Yes, this is supposed to be the new behavior. So kinda like a very very very simplistic front-end that lets you choose a new table after each game. Cancel then exits to 'normal' VP mode.

Thanks for the quick testing of the fix!

 

@Toxie

OK, thanks for the fix.. it didn't do that in v182rc. So if I want to edit a setting in the table I just played I will have to do a file reload from the previously ran list! I can live with that. (but I prefer it the old way) I use front ends for VP and VPVR, the only time I select the file from VPX is when I initially tryout a new table and do minor edit to the settings I like. Perhaps you could add a checkbox in the options to pick which way it behaves?

Edited by RYSr, 13 June 2021 - 12:24 AM.

[Csilk]

with rev202 I've been having hard times when trying to stream the game, if I do window or fullscreen capture and I quit out a table, subsequent table loads crash VPX.. even if I just alt tab it causes VPX to prompt for a new table and crash previously I could at least alt tab.

[wiesshund]

Mine is not doing any of that, so i think you must be able to turn that new feature off

and i must have turned off what ever it would use as a setting a long while ago

[toxie]

with rev202 I've been having hard times when trying to stream the game, if I do window or fullscreen capture and I quit out a table, subsequent table loads crash VPX.. even if I just alt tab it causes VPX to prompt for a new table and crash previously I could at least alt tab.

Can you please retry with https://github.com/v...7.0-203-6b4fe14 ?

[Thalamus]

Not run yet 20x - but, reading this, knowing how unstable vp is not exiting completely I'm baffled to see what is introduced ?! Wouldn't it be better to track bugs, clearing the issue of instability/memory leaks before making vp go into loops - or have I misunderstood ?