Jump to content



Photo
* * * * - 4 votes

Cabinet build


  • Please log in to reply
363 replies to this topic

#281 zany

zany

    3D Beer Drinker

  • VIP
  • 1,644 posts

  • Flag: Sweden

  • Favorite Pinball: Medieval Madness



Posted 03 April 2015 - 06:52 PM

Mike...do you have a photo or video of the latest solenoid config?

Viktory...sure...we did route it like that to give the whole planel more details....else they look pretty flat and booring! :D

 

No some of the buttons have text....just the standard looks. Not sure if there will be more buttons, or just these ones.

 

Attached Files



#282 zany

zany

    3D Beer Drinker

  • VIP
  • 1,644 posts

  • Flag: Sweden

  • Favorite Pinball: Medieval Madness



Posted 03 April 2015 - 07:41 PM

This is how i solved the "coin" buttons! :D

 

One of my cats like it too! :D


Edited by zany, 03 April 2015 - 07:42 PM.


#283 vampirolatino2

vampirolatino2

    Pinball Fan

  • Members
  • PipPipPipPip
  • 1,430 posts

  • Flag: Spain

  • Favorite Pinball: Medieval Madness

Posted 04 April 2015 - 01:40 AM

:bar2: cheers!



#284 maestro300

maestro300

    Enthusiast

  • Members
  • PipPipPip
  • 198 posts

  • Flag: United States of America

  • Favorite Pinball: Simpsons

Posted 04 April 2015 - 01:59 AM

Cool thanks Maestro.  I'm using a Twilight zone cabinet.  What size of speakers are suggested for the box?  I was going with a standard 12" subwoofer in the actual machine.

I use Flipper Fidelity speakers-- really sounds great!   Comes with the amp and bottom mounted sub.



#285 viktory2k1

viktory2k1

    Autistic Genius

  • Platinum Supporter
  • 986 posts
  • Location:Waukesha Wisconsin

  • Flag: United States of America

  • Favorite Pinball: Tales of the Arabian Nights

Posted 04 April 2015 - 04:47 AM

I like the coin door buttons, very clever. Unfortunately, I will be using my coindoor as a real coindoor so can't to that. Just can't get over the routing on speaker panel. I have never used a router on MDF and my panel is only 1/4" thick. I don't think plywood will route good on the edges. I still do have some cedar left from a park bench I made. Gotta watch the money now. Went way over budget last month. I fixed my booboo today, gotta make my post. Are you planning on plexiglass for the whole backbox?


 

I just use white buttons now and a rgb led! ;)

Do you have to setup the colors manually, or is it already been done in DOF?

Zany - thanks, I've spent alot of money @ arcadeworlduk, and it looks like i'll be spending some more ;)

 

 It should be setup in the rom already for most tables, just like the RGB flashers ppl put at the rear. I have both RGB and ws2812 RGB. The 2nd lights are not set up, maybe a few tables. PACLED64 for the standard GRB and Arduino for the ws2812 RGB. Just got it today(not the pacled64). My ledwiz will be mostly for toys. Read swisslizards DOF page. I learned alot in there. The Arduino is a whole different approach to led controlling, don't even know how to use it yet but read a little on the coding. Then you can get those effects like swisslizards video shows. I don't know how to really run any of this stuff but that sounded good hey?


Edited by viktory2k1, 04 April 2015 - 06:30 AM.

logo.png

 

If it ain't broke, it's probably a good idea to take it apart anyway!

I just post here to hear myself type.


#286 zany

zany

    3D Beer Drinker

  • VIP
  • 1,644 posts

  • Flag: Sweden

  • Favorite Pinball: Medieval Madness



Posted 04 April 2015 - 02:56 PM

Practise routing on scrap peices, to see what result you get!
We will go for real glass on the backbox, easier to keep it clean and free from scratches.

 

Heres the buttons lit up. These are wit regular 12v bulbs, but we will use 5v leds instead. Looks nice though! :D
 

Attached File  11102672_10153234064849766_3066987313415853123_n.jpg   24.75KB   20 downloads

 

Attached File  11130107_10153234064959766_7524608412111208172_n.jpg   14.12KB   18 downloads

 

Attached File  11138107_10153234065034766_2174423926777523957_n.jpg   17.62KB   18 downloads

 

 



#287 vampirolatino2

vampirolatino2

    Pinball Fan

  • Members
  • PipPipPipPip
  • 1,430 posts

  • Flag: Spain

  • Favorite Pinball: Medieval Madness

Posted 04 April 2015 - 05:02 PM

Looks great Zany! 12v will looks a lot better than 5v... you will see ;)

Did you have matching LED's? Because it will pop more if is yellow, red and green leds.



#288 zany

zany

    3D Beer Drinker

  • VIP
  • 1,644 posts

  • Flag: Sweden

  • Favorite Pinball: Medieval Madness



Posted 04 April 2015 - 05:32 PM

When it comes to leds, i guess it wont be any difference between 12 or 5v! :)
The leds ar just white ones!



#289 vampirolatino2

vampirolatino2

    Pinball Fan

  • Members
  • PipPipPipPip
  • 1,430 posts

  • Flag: Spain

  • Favorite Pinball: Medieval Madness

Posted 04 April 2015 - 08:57 PM

Cool. But try to use color match led. Trust me on this one, the button will looks a LOT better.



#290 jsncarter

jsncarter

    Hobbyist

  • Platinum Supporter
  • 42 posts
  • Location:Birmingham

  • Flag: United States of America

  • Favorite Pinball: Bram Stoker's Dracula, Attack from Mars, Scared Stiff, Theatre of Magic

Posted 05 April 2015 - 04:34 AM

I have "normal" buttons for the start and launch buttons.   They were normal 5v light bulbs, do they make replacement LED blubs for those standard buttons to swap out?


jsncarter___pinball-pc.png

 


#291 vampirolatino2

vampirolatino2

    Pinball Fan

  • Members
  • PipPipPipPip
  • 1,430 posts

  • Flag: Spain

  • Favorite Pinball: Medieval Madness

Posted 05 April 2015 - 04:50 AM

yes, they are a bunch of types of leds.



#292 jsncarter

jsncarter

    Hobbyist

  • Platinum Supporter
  • 42 posts
  • Location:Birmingham

  • Flag: United States of America

  • Favorite Pinball: Bram Stoker's Dracula, Attack from Mars, Scared Stiff, Theatre of Magic

Posted 05 April 2015 - 05:37 AM

Are they basically plug and play, as long as they are 5v LED bulbs?  Or do you need special wiring for them?


jsncarter___pinball-pc.png

 


#293 vampirolatino2

vampirolatino2

    Pinball Fan

  • Members
  • PipPipPipPip
  • 1,430 posts

  • Flag: Spain

  • Favorite Pinball: Medieval Madness

Posted 05 April 2015 - 07:06 AM

Yes plug and play. No, no need extra wires/modifications if you buy the correct led socked.


http://www.pinballli...parent=192&pg=1



#294 SoCalPlayer

SoCalPlayer

    Neophyte

  • Members
  • Pip
  • 8 posts

  • Flag: United States of America

  • Favorite Pinball: Star Trek LE

Posted 05 April 2015 - 05:31 PM

I am planning on using a LedWiz and a Sainsmart Relay board to drive contactors, etc. I noticed that the SaintSmart is active low... But in reading through the forums when people have connected relays directly up to the LedWiz they use the output to drive them directly (thru a fuse). So when LedWiz "turns on" an output is it in actuality switching from logic high to logic low (ground)?

#295 gtxjoe

gtxjoe

    VPF Veteran

  • VIP
  • 5,159 posts

  • Flag: United States of America

  • Favorite Pinball: Medieval Madness, AbraCadabra



Contributor

Posted 05 April 2015 - 07:13 PM

The LEDWiz output is open and then when activated it become the ground

#296 SoCalPlayer

SoCalPlayer

    Neophyte

  • Members
  • Pip
  • 8 posts

  • Flag: United States of America

  • Favorite Pinball: Star Trek LE

Posted 06 April 2015 - 02:55 AM

Thank you. Off to Amazon to buy the relay board.

#297 viktory2k1

viktory2k1

    Autistic Genius

  • Platinum Supporter
  • 986 posts
  • Location:Waukesha Wisconsin

  • Flag: United States of America

  • Favorite Pinball: Tales of the Arabian Nights

Posted 06 April 2015 - 05:43 AM



Thank you. Off to Amazon to buy the relay board.

You can get it cheaper on ebay, not sainsmart but a clone and if you already have the ledwiz, I would just get the 16 relay board from ebay. Even cheaper! The relay board has low level inputs too so you may be able to hook those to the LEDWIZ. Still a little confused about the LEDWIZ and PACLED64.

Zany, I did some practicing on scrap and I can route the 1/4" but I may go buy some 1/2 inch if I can get the bezel off of backglass tv and DMD monitor. I think I can cut and route with a guide for the bearing and get some really nice edges. I may just do a round over but I have some interesting bits. The plywood routes ok but some of the plys came loose so MDF will be smoother. I set my backbox up and it doesn't impress me.

 

IMG_0409_zpsgzwgm8ay.jpg

 

I am not a pro with a router but this is just basic stuff but I know I can do much more with it.

WOW did this pic turn out bad, it's supposed to be 3/4"plywood with a 3/8 roundover set low and below the plywood it the 1/4" MDF with a 1/8" roundover set high.


Edited by viktory2k1, 06 April 2015 - 05:46 AM.

logo.png

 

If it ain't broke, it's probably a good idea to take it apart anyway!

I just post here to hear myself type.


#298 DDH69

DDH69

    Pinball Wizard

  • Platinum Supporter
  • 3,628 posts
  • Location:DOFLinx HQ, Adelaide

  • Flag: Australia

  • Favorite Pinball: Monster Bash

Posted 06 April 2015 - 07:10 AM

Zany, I saw your video with those solenoids hitting the cable tie loop for the slingshots.  Have I missed your full explanation / video of how you set them all up and what they are hitting?

 

I have 10 very similar (if not the same) solenoids for my current build and would love to know what worked for you.


DOFLinx
Contributions for equipment to help with ongoing DOFLinx development can be made here

#299 maestro300

maestro300

    Enthusiast

  • Members
  • PipPipPip
  • 198 posts

  • Flag: United States of America

  • Favorite Pinball: Simpsons

Posted 06 April 2015 - 02:09 PM

Zany, I saw your video with those solenoids hitting the cable tie loop for the slingshots.  Have I missed your full explanation / video of how you set them all up and what they are hitting?

 

I have 10 very similar (if not the same) solenoids for my current build and would love to know what worked for you.

 

I think that was actually my video.   I will get a video up tonight to go over what they hit for the different sounds.    So the slingshots hit a plastic cable clamp-- the flippers are mounted on a 3" piece of PVC trim and hit metal L brackets (Makes them much louder)  the middle bumpers do not hit anything but are also mounted across on a PVC trim board (spanning the width).   The upper bumpers hit a chinese bike bell which gives it a metallic ring/clank sound like real bumpers (or as close as I could get it)    Its always a work in progress!

 

I'll do the video and emphasize just the solenoid sounds-- I can also compare it to my real pinball machine.



#300 vampirolatino2

vampirolatino2

    Pinball Fan

  • Members
  • PipPipPipPip
  • 1,430 posts

  • Flag: Spain

  • Favorite Pinball: Medieval Madness

Posted 06 April 2015 - 02:10 PM

Hi maestro300 .. can I ask you, where I can find the PCV boards? :) thanks!