Jump to content




Tutorial info Visit support topic

  • Added on: Mar 02 2013 09:23 PM
  • Views: 1080
 


* * * * *
0 Ratings

Replay Adjustment - Sega/Stern Whitestar

The procedure to adjust replay levels on Sega/Stern Whitestar tables.

Posted by ta2686 on Mar 02 2013 09:23 PM
Here is the procedure to reset replay levels on Stern tables with the Sega/Stern Whitestar system. 
 
1. Press 7 to enter the service portal menu
 
2. Press the right shift key twice to move the cursor to the adjustment selection (wrench icon)
 
 
3. Press 1 key to enter adjustments menu
 
4. With the cursor on the pinball icon, press 1 to enter Stern adjustments menu
 
5. The first item shown is replay percentage. The default for this selection is 10%.  Using the right shift key, move the cursor to the ‘+’ icon in order to raise the percentage, or to the ‘-‘  icon to lower the percentage.
 
6. With the cursor on the selection you want, press 1 key to change the percentage by 1% per press.  This item can be set from 1% to 50% or to fixed replays.
 
7. When you have the percentage at the level you like, move the cursor using the left shift key to the right arrow icon (->) and press the 1 key.  You should see a request accepted message flashing if you changed that value.  You should see the number of replay levels.
 
8. This value defaults to 1.  Again, using the right shift key move the cursor to the ‘+’ icon to raise the number of replay levels, or to the ‘-‘ icon to lower the number of replay levels.  This can be set from 0 to 4.
 
9. When you have the number of replay levels you like, use the left shift key to move the cursor back to the right arrow (->) and press the 1 key.  You should be taken to the first replay level.
 
10. Using the right shift key, move the cursor to the ‘+’ icon to raise the replay level, or to the ‘-‘ icon to lower the replay level.  Use the 1 key to change the score by the following:
      a. 100,000 points – Striker Xtreme, Sharkey’s Shootout, Monopoly, NFL 
      b. 1,000,000 points – High Roller Casino, Austin Powers, Playboy, Roller Coaster Tycoon
 
(NOTE: If you have set the value in the previous step to more than 1, then after setting this replay value to the score you want, use the left shift key to move the cursor back to the right arrow icon then press 1 to go to the next replay level, then repeat step 10 for the next replay level,  Do this for each replay level desired)
 
11. To exit the system, use the right shift key to move the cursor to the ‘QUIT’ icon, then press the 1 key to exit.
 
This procedure should work for the following tables:
 
Stern Sega/Stern Whitestar tables:
 
Striker Xtreme, Sharkey’s Shootout, High Roller Casino, Austin Powers, Monopoly, NFL, Playboy, Roller Coaster Tycoon