Here is the procedure to set replay levels on Taito do Brasil tables. This procedure is more elaborate than other tables that have been covered.
1. Press the END key to open the coin door.
2. Press the 7 key to raise the service switch
3. Press the 8 key to raise the adjustment switch
4. You should see something similar to the following:
5, Press the minus key (‘-‘) then press the 1 key to enter the menu system, then press those keys 4 more times to get to menu selection 5, the first replay level. The first player display should look something similar to this:
6. Press F6 to bring up the dip switch menu
7. Select the dip switches that correspond to the score you want to set the first replay level to. The dip switches that we need to concern ourselves with are marked CH5, CH6 and CH7 in the dip switch menu. The combination of the switches selected will correspond to the value in the table shown below (NOTE: I am taking this information from a document created by PacDude when he created his Fire Action table. From what tests I have done, this holds true for all tables by this manufacturer. The values shown come from his document, but they may not apply to all of this manufacturer’s tables):
CH5 CH6 CH7
Default Off Off Off
400,000 On Off Off
440,000 Off On Off
480,000 On On Off
520,000 Off Off On
560,000 On Off On
600,000 Off On On
640,000 On On On
8. Click OK to exit dip switch menu. You should see two different digits in the last two positions of the first player display
9. Press the zero (‘0’) key to move the new value into the third and fourth digits.
10. Press the minus key and then the 1 key to go to the second replay score.
11. Repeat steps 6 through 9 to set the second replay level
12. Press the minus key and then the 1 key to go to the third replay score
13. Repeat steps 6 through 9 to set the third replay level
(NOTE: To disable a replay level, set that replay level to the same value as the first replay level)
14. Press F6 to enter dip switch menu
15. If any of the switches are set, uncheck them
16. Click OK to exit dip switch menu
17. Press 7 key to lower the service switch
18. Press 8 key to lower the adjustment switch
19. Press the END key to close the coin door
This procedure should work for the following tables:
Taito tables:
Gork, Lady Luck, Lunelle, Meteor, Mr. Black*, Oba-Oba, Polar Explorer, Shock, Snake Machine, Speed Test, Titan, Vegas, Drakar, Cosmic, Fire Action, Rally, Cavaliero Negro, Sure Shot, Gemini 2000, Shark, Zarza, Fire Action Deluxe, Hawkman, Vortex
*- currently not working
This procedure should also work with Rowamet’s Heavy Metal
1. Press the END key to open the coin door.
2. Press the 7 key to raise the service switch
3. Press the 8 key to raise the adjustment switch
4. You should see something similar to the following:
- In player one display: 061105
- In player two display: 404010
- In player three display: 010540
- In player four display: either all zeros or all blanks
5, Press the minus key (‘-‘) then press the 1 key to enter the menu system, then press those keys 4 more times to get to menu selection 5, the first replay level. The first player display should look something similar to this:
053600
which corresponds to this: the first two digits are the menu option, the third and fourth digits correspond to the current first replay score times 10,000 (that is, in the above example the first replay score is 360,000), the last two digits correspond to the possible value that it can be set to (currently 00 so the value will not change)6. Press F6 to bring up the dip switch menu
7. Select the dip switches that correspond to the score you want to set the first replay level to. The dip switches that we need to concern ourselves with are marked CH5, CH6 and CH7 in the dip switch menu. The combination of the switches selected will correspond to the value in the table shown below (NOTE: I am taking this information from a document created by PacDude when he created his Fire Action table. From what tests I have done, this holds true for all tables by this manufacturer. The values shown come from his document, but they may not apply to all of this manufacturer’s tables):
CH5 CH6 CH7
Default Off Off Off
400,000 On Off Off
440,000 Off On Off
480,000 On On Off
520,000 Off Off On
560,000 On Off On
600,000 Off On On
640,000 On On On
8. Click OK to exit dip switch menu. You should see two different digits in the last two positions of the first player display
9. Press the zero (‘0’) key to move the new value into the third and fourth digits.
10. Press the minus key and then the 1 key to go to the second replay score.
11. Repeat steps 6 through 9 to set the second replay level
12. Press the minus key and then the 1 key to go to the third replay score
13. Repeat steps 6 through 9 to set the third replay level
(NOTE: To disable a replay level, set that replay level to the same value as the first replay level)
14. Press F6 to enter dip switch menu
15. If any of the switches are set, uncheck them
16. Click OK to exit dip switch menu
17. Press 7 key to lower the service switch
18. Press 8 key to lower the adjustment switch
19. Press the END key to close the coin door
This procedure should work for the following tables:
Taito tables:
Gork, Lady Luck, Lunelle, Meteor, Mr. Black*, Oba-Oba, Polar Explorer, Shock, Snake Machine, Speed Test, Titan, Vegas, Drakar, Cosmic, Fire Action, Rally, Cavaliero Negro, Sure Shot, Gemini 2000, Shark, Zarza, Fire Action Deluxe, Hawkman, Vortex
*- currently not working
This procedure should also work with Rowamet’s Heavy Metal