Jump to content




Tutorial info Visit support topic

  • Added on: Apr 17 2013 10:25 PM
  • Views: 920
 


* * * * *
0 Ratings

Replay Adjustment - Williams WPC Alpha

Procedure to adjust replay levels on Williams WPC Alpha tables

Posted by ta2686 on Apr 17 2013 10:25 PM
Here is the procedure to change replay levels on Williams WPC Alpha tables. These were the last tables Williams produced before moving to the DMD displays.
 
1. Press the END key to open the coin door.
 
2. Press 0 to enter diagnostic mode.
 
3. Press 0 to go to the main menu.
 
4. Using the 8 and 9 keys, scroll through the menus until you see the Adjustments menu item.
 
5. Press 0 twice to enter this menu item.
 
6. Press 9 a total of 5 times to see Replay System in the displays.
 
7. Press 0 to allow changes.
 
8. Using 8 or 9, scroll through the replay percentages until you find the one you want. You can choose between Auto replay percentage or fixed replay scores. Using auto replay percentage will adjust the first level replay score after a certain number of games depending upon certain factors (an example being the number of times first replay level has been exceeded)
 
9. Press 0 to accept the changes. What you will see next when you press the 9 key depends upon whether you chose auto replay percentage or fixed replays.
 
For Auto Replays:
 
10. Press 9 to see replay % in the displays
 
11. Press 0 to allow changes.
 
12. Use the 8 key to lower the percentage or the 9 key to raise the percentage. Percentage can be set between 5% and 50% inclusive.
 
13. Press 0 to accept the changes.
 
14. Press 9 to see replay start level.
 
15. Press 0 to allow changes.
 
16. Press 8 to lower replay score or 9 to raise the replay score. Score will change by 100,000 when pressing either the 8 or the 9 key. The replay level can be set between 1,000,000 and 15,000,000 inclusive.
 
17. Press 0 to accept the changes.
 
18. Press 9 to see replay levels in the displays.
 
19. Press 0 to allow changes.
 
20. Press 8 to lower or 9 to raise the number of replay levels. You can have from 1 to 4 replay levels on these tables.
 
(NOTE: If you select more than 1 replay level, each successive replay level will be a multiple of the first replay level score which is set in the previous option)
 
21. Press 0 to accept the changes. Skip down to the replay boost section.
 
For Fixed Replays:
 
10. Press 9 to see replay level 1 in the displays.
 
11. Press 0 to allow changes.
 
12. Press 8 to lower or 9 to raise the replay level. The replay level can be set to off, thus disabling it, or between 1,000,000 and 25,000,000 inclusive. The score will increment by 100,000 while you are pressing the 8 or 9 key.
 
13. Press 0 to accept changes.
 
14. Press 9 to see replay level 2 in the displays.
 
15. Repeat steps 11-13 to change the second replay level.
 
16. Press 9 to see replay level 3 in the displays.
 
17. Repeat steps 11-13 to set the third replay level.
 
18. Press 9 to see replay level 4 in the displays.
 
19. Repeat steps 11-13 to set fourth replay level.
 
Replay Boost Section:
 
The value set in this item will be the value that the replay levels will change after a certain number of plays depending on certain factors.
 
22. Press 9 to see replay boost in the displays
 
23. Press 0 to allow changes.
 
24. Press 8 to lower or 9 to raise the replay boost value. This value can be set to off, thus disabling it, or between 500,000 and 5,000,000 inclusive. The score will change by 500,000 as you are pressing either the 8 or the 9 key.
 
25. Press 0 to accept the changes.
 
26. Press 7 several times to save the changes and reset the table.
 
This procedure should work for the following tables:
 
Williams WPC Alpha tables:
Funhouse, Harley Davidson, The Machine: Bride of Pin*bot