Jump to content




Tutorial info Visit support topic

  • Added on: Apr 17 2013 09:51 PM
  • Views: 901
 


* * * * *
0 Ratings

Replay Adjustment - Williams System 6A

Procedure to adjust replay levels on Williams System 6A tables

Posted by ta2686 on Apr 17 2013 09:51 PM
Here is the procedure to reset the replay levels on Williams System 6A tables. Note that it is basically the same procedure as the System 6 tables, but the score will increment by 100,000 points instead of 10,000 points:
 
1. Press 9 to enter diagnostic mode. The displays should go blank when this key is pressed.
 
2. Press 8 to enter test mode.
 
3. Press 7 then press 8 to see 01 in the credit display.
 
4. Continue to press 8 until you see 04 in the credit display and 13 in the match/ball in play display.
 
5. Press and hold the 1 key to change the high score to date. Score will increment by 100,000 points while holding in the 1 key. When you reach the score you want to set it to, release the 1 key. (NOTE: If you want to lower the high score to date or you went past the score you wanted to set it to, release the 1 key, press and release the 7 key, then press and hold the 1 key. Score should then decrement by 100,000 points)
 
6. Press the 8 key to see 14 in the match/ball in play display (NOTE: If you had pressed 7 in the previous step, press 7 then 8 to go to the next option, otherwise you will go to the previous option)
 
7. Repeat step 5 to reset the first replay level
 
8. Press 8 to see 15 in the match/ball in play display.
 
9. Repeat step 5 to rest the second replay level
 
10. Press 8 to see 16 in the match/ball in play display
 
11. Repeat step 5 to set the third replay level.
 
12. Press F3 to save your changes and reset the table.
 
NOTE: To reset the current high score back to the default high score (set in
option 13) press the 6 key while in attract mode.
 
This procedure should work on the following tables:
 
Williams System 6A tables:
 
Algar, Alien Poker