Started building this with a buddy over labor day weekend. Made some good progress but still a bit to go.
Dual Screen Cabinet 25" PF - 19" BG
Quad Core PC 8GB RAM - 1GB Video RAM
Plan on doing 8 buttons
No Plunger, No movement(too expensive)
Cabinet Dimensions
PF Box
20 3/4" wide and 33 3/4" long
13 1/2" Tall at front to 16" at the back(Originally had it at 17 1/2" in the back but had issues)
BG Box w/ Speaker Box
Cant remember right now
The design took an interesting change when we had everything together. In short it just seemed like the BG was not tall enough. So we improvised some tubes to raise it up. Need to really get this cabinet on some legs and then tweak the height of the BG. Hopefully in the next week or two.
Back Glass
WP_20140829_003.jpg 68.34KB 41 downloads
Abe working on the slider guide and trim for the speaker box, This turned out really well.
WP_20140830_001.jpg 69.61KB 32 downloads
Back Glass and speaker before mounting and ventilation holes
WP_20140830_005.jpg 156.75KB 30 downloads
Abe putting the sides on. We had a couple of silly user errors on this one...but we made it through
WP_20140831_005.jpg 81.87KB 33 downloads
Playfield with bracing inside and few buttons drilled. The button on the front panel in the top left are hitting a brace on the inside of the cabinet. Need to sort that. Front door will open from the front for maintenance.
WP_20140831_008.jpg 161.55KB 33 downloads
Closer shot of the bracing. This went surprising well also.
WP_20140831_009.jpg 123.08KB 31 downloads
Full shot. Not bad after about 16 hours. More to come!
WP_20140831_010.jpg 117.38KB 37 downloads
Edited by rtkiii, 15 October 2015 - 08:48 PM.