27 replies to this topic

[jpsalas]

Flash VP91x v1.2FS



Version: 1.2.0
Category: VP 9.x Cabinet Tables (FULL SCREEN)

Author(s): jpsalas

Description:
Based on the Williams Flash table from 1979
Angle independent, only for VP912 due to the use of the alpha transparency, etc, etc

This FS version has higher resolution graphics, but the originals were very very small, so the quality isn't very great, and a few of the plastics were broken too. So if you have better pictures of this table don't hesitate in to send them to me so I can update the table with better graphics.

Update 1.1
- Changed the plastics (thanks Ezepov for the pictures). They look much better in this FS version.
- Changed a little the playfield using some pictures Strangeleo72 sent me, thanks
- Made some changes to the speed of the ball and the strength of the plunger, thanks ta2686
- Made some changes to le outlane layout, making the left a little easier (moved the post a little down)
- I hope I stopped the ball going on top of the left plastic.

Update 1.2
- New playfield. Thanks to Ezepov for the redraw.

View File

Submitted by jpsalas, on Jul 30 2011, 02:38 PM

Edited by jpsalas, 01 August 2011 - 03:43 PM.

[moogster66]

Thanks JP! Downloading now.

Edit: Outstanding work JP! The table plays great! I noticed that the kicker on the right needs a surface to keep the ball from cutting in half when it enters the cup.

Edited by moogster66, 30 July 2011 - 07:11 PM.

[vamp]

Thank you for this release!

I will try it on my new cabinet tomorrow. (i'ts an old Flash machine so extra nice!)

[Flying Dutchman]

Thanks a million JPSalas!

Cheers,
FD.

[R_L]

Thanks for another great table JP!

Found one glitch when hitting the left top wall the ball shoots out in the periphery.
see pic.

regards,

RL

Attached Files

•  flash_bugg_20110730.png   124.6KB   36 downloads

[jpsalas]

Thanks for the bug report R_L

I got a nice set of pictures of the plastics from Ezepov, thanks!

JP

[jpsalas]

Update 1.1
- Changed the plastics (thanks Ezepov for the pictures)
- Changed a little the playfield using some pictures Strangeleo72 sent me, thanks
- Made some changes to the speed of the ball and the strength of the plunger, thanks ta2686
- Made some changes to the outlane layout, making the left one a little easier (moved the post a little down)
- I hope I stopped the ball going on top of the left plastic.

JP

[jpsalas]

I have received a very nice playfield from Ezepov, a redraw as I can see. Thanks Ezepov!
I'll need a few days to remake the lights. Tomorrow I'll have to go to work a again, it is monday . But I guess I'll have a few hours every day and by Thursday or Friday it will be ready.

[ced]

Thanks JP for your new tablessssss !!!

[chas]

Update 1.1
- Changed the plastics (thanks Ezepov for the pictures)
- Changed a little the playfield using some pictures Strangeleo72 sent me, thanks
- Made some changes to the speed of the ball and the strength of the plunger, thanks ta2686
- Made some changes to the outlane layout, making the left one a little easier (moved the post a little down)
- I hope I stopped the ball going on top of the left plastic.

JP

i have had a few tables where the ball jumped.
when the ball jumps a wall or out of the playfield would that be the top decal plastic wall and the top/bottom height of the wall in the editor?
what is a good setting for the vp9 top decals and walls top/bottom height or do they vary?

Edited by chas, 31 July 2011 - 06:13 PM.

[tamoore]

THANK YOU!

[DJ Wheels]

Magnificent!
-I had the ball jump a few times also.

Update 1.1
- Changed the plastics (thanks Ezepov for the pictures)
- Changed a little the playfield using some pictures Strangeleo72 sent me, thanks
- Made some changes to the speed of the ball and the strength of the plunger, thanks ta2686
- Made some changes to the outlane layout, making the left one a little easier (moved the post a little down)
- I hope I stopped the ball going on top of the left plastic.

JP

i have had a few tables where the ball jumped.
when the ball jumps a wall or out of the playfield would that be the top decal plastic wall and the top/bottom height of the wall in the editor?
what is a good setting for the vp9 top decals and walls top/bottom height or do they vary?

[chas]

DJ
>>-I had the ball jump a few times also.<<<<<<

i raised the top and bottom height.
sometimes it worked.
did you fix it and how?

[Grizz]

Beautiful :}
Thanks JP
Attached is BG I did awhile back :}
may help a few out :}

Attached Files

•  Flash_BG.png   3.59MB   42 downloads

[jpsalas]

Update 1.2
- New playfield! Thanks to Ezepov for the redraw.

I know I said I should have the playfield done in a few days, but the redraw was so good I had to rebuild the playfield now I kept the images of the couple since I liked the original versions that I had fixed

I guess the table is final now.

Nice backglass Grizz

JP

[gwjrabbit]

Update 1.2
- New playfield! Thanks to Ezepov for the redraw.

I know I said I should have the playfield done in a few days, but the redraw was so good I had to rebuild the playfield now I kept the images of the couple since I liked the original versions that I had fixed

I guess the table is final now.

Nice backglass Grizz

JP

What a wonderful, unexpected surprise JP! Thank you so much, you made my week.

[settingsons]

What a great surprise - another great addition to the cabinet - plays wonderfully. Thank you JP and Ezepov. Also thanks Grizz for the great backglass!

[DedRok_V]

Thanks for the table and update JP, and the redraw Ezepov.

The cab thanks you.

[cwg29]

Mr. JP Salas, I really enjoy this FS pin. I have a request. I recently restored a Flash machine in which I used my own art. I am wondering if I could have permission to use that art with this VP table to make a custom? I would like your permission first as I would like to upload it eventually (pending final result). You may review my work here: http://flashredo.weebly.com/ . And thanks for all those great tables.

[jpsalas]

Yes, of course, go ahead. And very nice graphics on that custom Flash machine