Replay Adjustment - Bally Second Generation 6803

Here is the procedure to change replay levels on the Second Generation Bally 6803 tables.
 
1. Press END key to open the coin door.
 
2. Press the 9 key on the keyboard side to enter test mode.
 
3. On the numeric keypad side, press either the '/' key or the '*' key to cycle through the options until you get to the percent options menu item.
 
4. Press the enter key on the numeric keypad to see Threshold 1 score.
 
5. Using the numbers on the numeric keypad, enter the new value for the first replay level, then press enter on the numeric keypad.
 
6. Press enter on the numeric keypad several times until you see Threshold 2 score.
 
7. Repeat step 5 to set the second replay level.
 
8. Press enter on the numeric keypad to see Threshold 3 score.
 
9. Repeat step 5 to set the third replay level.
 
10. Press enter on the numeric keypad to see the high score to date.
 
11. Repeat step 5 to set the high score to date.
 
12. Either press 6 on the keyboard side or press F3 to save your changes and reset the table.
 
 (NOTE: To disable a replay level, set that replay level to zero)
 
This procedure should work on the following tables:
 
Second Generation Bally 6803 tables:
Motordome, Black Belt, Special Force, Strange Science, City Slicker, Hard Body, Party Animal, Heavy Metal Meltdown, Dungeons and Dragons.